Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. This document is intended primarily for users when conducting regular chamber performance monitoring. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - verbal forms have, in many parts, been changed to express requirements instead of recommendations ('shall' instead of 'should'); - Table 1 has been updated.

Umgebungseinflüsse – Teil 3-7: Unterstützende Dokumentation und Leitfaden – Messungen in Temperaturprüfkammern für Prüfungen A (Kälte) und B (trockene Wärme) (mit Prüfgut)

Essais d'environnement - Partie 3-7: Documentation d'accompagnement et recommandations - Mesurages dans les chambres d'essai en température pour les essais A (froid) et B (chaleur sèche) (avec charge)

IEC 60068-3-7:2020 est disponible sous forme de IEC 60068-3-7:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 60068-3-7:2020 spécifie une méthode uniforme et reproductible pour confirmer que les chambres d'essai en température respectent les exigences spécifiées dans les procédures d'essai climatique de l'IEC 60068-2-1 et de l'IEC 60068-2-2 lorsqu'elles sont chargées de spécimens dissipateurs d'énergie ou non, dans des conditions qui tiennent compte d'une circulation d'air à l'intérieur de l'espace de travail de la chambre. Le présent document s'adresse en premier lieu aux utilisateurs qui effectuent une surveillance régulière des performances des chambres. Cette deuxième édition annule et remplace la première édition parue en 2001. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - dans plusieurs parties, les formes verbales ont été remplacées par des exigences explicites en lieu et place des recommandations ("devoir" au lieu de "il convient"); - le Tableau 1 a été mis à jour.

Okoljsko preskušanje - 3-7. del: Podporna dokumentacija in navodilo - Meritve v temperaturnih komorah za preskuse A (hladno) in B (suha toplota) (z obremenitvijo) (IEC 60068-3-7:2020)

General Information

Status
Published
Publication Date
27-Aug-2020
Current Stage
6060 - Document made available - Publishing
Start Date
28-Aug-2020
Completion Date
28-Aug-2020

Relations

Buy Standard

Standard
EN IEC 60068-3-7:2020
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60068-3-7:2020
01-november-2020
Nadomešča:
SIST EN 60068-3-7:2002
Okoljsko preskušanje - 3-7. del: Podporna dokumentacija in navodilo - Meritve v
temperaturnih komorah za preskuse A (hladno) in B (suha toplota) (z
obremenitvijo) (IEC 60068-3-7:2020)
Environmental testing - Part 3-7: Supporting documentation and guidance -
Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
(IEC 60068-3-7:2020)
Umweltprüfungen - Teil 3-7: Unterstützende Dokumentation und Leitfaden - Messungen
in Temperaturprüfkammern für die Prüfungen A und B (mit Prüfgut) (IEC 60068-3-7:2020)
Essais d'environnement - Partie 3-7: Documentation d'accompagnement et guide -
Mesures dans les chambres d'essai en température pour les essais A et B (avec charge)
(IEC 60068-3-7:2020)
Ta slovenski standard je istoveten z: EN IEC 60068-3-7:2020
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN IEC 60068-3-7:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60068-3-7:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 60068-3-7:2020


EUROPEAN STANDARD EN IEC 60068-3-7

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2020
ICS 19.040; 29.020 Supersedes EN 60068-3-7:2002 and all of its
amendments and corrigenda (if any)
English Version
Environmental testing - Part 3-7: Supporting documentation and
guidance - Measurements in temperature chambers for tests A
(Cold) and B (Dry heat) (with load)
(IEC 60068-3-7:2020)
Essais d'environnement - Partie 3-7: Documentation Umgebungseinflüsse - Teil 3-7: Unterstützende
d'accompagnement et recommandations - Mesurages dans Dokumentation und Leitfaden - Messungen in
les chambres d'essai en température pour les essais A Temperaturprüfkammern für Prüfungen A (Kälte) und B
(froid) et B (chaleur sèche) (avec charge) (trockene Wärme) (mit Prüfgut)
(IEC 60068-3-7:2020) (IEC 60068-3-7:2020)
This European Standard was approved by CENELEC on 2020-08-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60068-3-7:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60068-3-7:2020
EN IEC 60068-3-7:2020 (E)
European foreword
The text of document 104/868/FDIS, future edition 2 of IEC 60068-3-7, prepared by IEC/TC 104
"Environmental conditions, classification and methods of test" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 60068-3-7:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-11
document have to be withdrawn
This document supersedes EN 60068-3-7:2002 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60068-3-7:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-1 NOTE Harmon
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.