EN 61162-1:2016
(Main)Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
IEC 61162-1:2010(E) contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. Is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. The main changes with respect to the previous edition are listed below: - certain sentences have been removed as they are not used by other standards prepared by technical committee 80; - new sentences have been added; corrections have been made to certain sentences (ABK, BBM, DOR, FIR, SSD, TUT, and VTG); - new fields have been added to certain sentences; - three additional tests have been added to Annex B.
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen - Teil 1: Ein Datensender und mehrere Datenempfänger
Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 1: Emetteur unique et récepteurs multiples
La CEI 61162-1:2010 contient les exigences pour la communication des données entre les instruments maritimes électroniques, les équipements de navigation et de radiocommunications lorsqu'ils sont interconnectés via un système approprié. La présente partie de la CEI 61162 est destinée à supporter l'émission unidirectionnelle de données série entre un émetteur unique et un ou plusieurs récepteurs. Ces données sont au format ASCII imprimable et peuvent inclure des informations telles que la position, la vitesse, la profondeur, l'allocation de fréquences, etc. Les messages types peuvent être de longueur comprise entre environ 11 et 79 caractères au maximum et nécessitent généralement une émission pas plus rapidement qu'un seul message à la seconde. Les définitions électriques de la présente norme ne sont pas destinées à gérer les applications à large bande passante comme les radars ou l'imagerie vidéo, ou encore les bases de données intensives et les applications de transfert de fichiers. En l'absence de disposition garantissant l'émission des messages et compte tenu de la capacité limitée de vérification des erreurs, il convient que la présente norme soit utilisée avec précaution dans toutes les applications de sécurité.
Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Digitalni vmesniki - 1. del: Enosmerna komunikacija: en govorec - več poslušalcev (IEC 61162-1:2016)
Standard IEC 61162-1:2010(E) vsebuje zahteve za podatkovno komunikacijo med pomorskimi elektronskimi instrumenti, navigacijsko in radiokomunikacijsko opremo ob povezavi z ustreznim sistemom. Namenjen je podpori enosmernega prenosa podatkov od enega govorca do enega ali več poslušalcev. Ti podatki so v natisljivi kodi ASCII in lahko vključujejo informacije, kot so položaj, hitrost, globina, dodelitev frekvenc, itd. Tipična sporočila so lahko dolga 11–79 znakov in na splošno ne zahtevajo prenosa, hitrejšega od prenosa enega sporočila na sekundo. Za aplikacije, pri katerih je potreben hitrejši prenos, je priporočljiv sklic na standard IEC 61162-2. Spodaj so navedene glavne spremembe glede na predhodno različico: – nekateri stavki so bili odstranjeni, ker niso uporabljeni v drugih standardih, ki jih je pripravil tehnični odbor 80; – dodani so bili novi stavki; določeni stavki so bili popravljeni (ABK, BBM, DOR, FIR, SSD, TUT in VTG); – nekaterim stavkom so bila dodana nova polja; – dodatku B so dodani trije dodatni preskusi.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.'LJLWDOQLNavigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen - Teil 1: Ein Datensender und mehrere DatenempfängerMatériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 1: Emetteur unique et récepteurs multiplesMaritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 61162-1:2016)47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 61162-1:2016SIST EN 61162-1:2017en01-februar-2017SIST EN 61162-1:2017SLOVENSKI
STANDARDSIST EN 61162-1:20111DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61162-1
December 2016 ICS 47.020.70
Supersedes
EN 61162-1:2011
English Version
Maritime navigation and radiocommunication equipment and systems - Digital interfaces -
Part 1: Single talker and multiple listeners (IEC 61162-1:2016)
Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 1: Emetteur unique et récepteurs multiples (IEC 61162-1:2016)
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen -
Teil 1: Ein Datensender und mehrere Datenempfänger (IEC 61162-1:2016) This European Standard was approved by CENELEC on 2016-10-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61162-1:2016 E SIST EN 61162-1:2017
This document supersedes EN 61162-1:2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61162-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61023 NOTE Harmonized as EN 61023. IEC 61097-1 NOTE Harmonized as EN 61097-1. IEC 61108-1 NOTE Harmonized as EN 61108-1. IEC 61108-2 NOTE Harmonized as EN 61108-2. IEC 61108-3 NOTE Harmonized as EN 61108-3. IEC 61108-4 NOTE Harmonized as EN 61108-4. IEC 61993-2 NOTE Harmonized as EN 61993-2. IEC 61996-1 NOTE Harmonized as EN 61996-1. IEC 61996-2 NOTE Harmonized as EN 61996-2. IEC 62065 NOTE Harmonized as EN 62065. IEC 62252 NOTE Harmonized as EN 62252. IEC 62287-1 NOTE Harmonized as EN 62287-1. SIST EN 61162-1:2017
Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60945 2002
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results EN 60945 2002
IEC 61097-6 -
Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) - -
IEC 61108 series
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) EN 61108 series
IEC 61162 series
Maritime navigation and radiocommunication equipment and systems - Digital interfaces EN 61162 series
IEC 61162-2 1998
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission EN 61162-2 1998
IEC 61174 -
Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results EN 61174 -
Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results EN 61924-2 2013
IEC 61996 series
Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) EN 61996 series
ISO/IEC 8859 series
Information technology - 8-bit single-byte coded graphic character sets - - ISO/IEC 8859-1 1998
Information technology - 8-bit single-byte coded graphic character sets - Part-1: Latin alphabet No. 1 - -
ISO/IEC 10646 -
Information technology - Universal Coded Character Set (UCS) - -
ITU-R Recommendation M.493 -
Digital selective-calling system for use in the maritime mobile service - -
ITU-R Recommendation M.625 -
Direct-printing telegraph equipment employing automatic identification in the maritime mobile service - -
ITU-R Recommendation M.821 -
Optional expansion of the digital selective-calling system for use in the maritime mobile service - -
ITU-R Recommendation M.1084 -
Interim solutions for improved efficiency in the use of the band 156-174 MHz by stations in the maritime mobile service - -
ITU-R Recommendation M.1371 -
Technical characteristics for an automatic identification system using time-division multiple access in the VHF maritime mobile band - -
ITU-T Recommendation X.27/V.11 1996 Electrical characteristics for balanced double-current interchange circuits operating at data signalling rates up to 10 Mbit/s - -
IMO 908E -
International SafetyNET Manual - -
IMO 951E -
NAVTEX Manual - -
IMO MSC.252(83) -
Performance Standards for Integrated Navigation Systems (INS) - -
IMO MSC.302(87) -
Performance standards for Bridge Alert Management (BAM) - -
IEC 61162-1 Edition 5.0 2016-08 INTERNATIONAL STANDARD
Maritime navigation and radiocommunication equipment and systems – Digital interfaces –
Part 1: Single talker and multiple listeners
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ICS 47.020.70
ISBN 978-2-8322-3594-2
– 2 – IEC 61162-1:2016 IEC 2016
CONTENTS FOREWORD .8 INTRODUCTION . 10 1 Scope . 11 2 Normative references . 11 3 Terms and definitions . 13 3.1 General . 13 3.2 Terms and definitions . 13 4 Manufacturer's documentation . 13 5 Hardware specification . 13 5.1 General . 13 5.2 Interconnecting wire . 13 5.3 Conductor definitions . 13 5.4 Electrical connections/shield requirements . 14 5.5 Connector . 14 5.6 Electrical signal characteristics . 14 5.6.1 General . 14 5.6.2 Signal state definitions . 14 5.6.3 Talker drive circuits . 14 5.6.4 Listener receive circuits . 14 5.6.5 Electrical isolation . 15 5.6.6 Maximum voltage on bus . 15 6 Data transmission . 15 7 Data format protocol . 16 7.1 Characters . 16 7.1.1 General . 16 7.1.2 Reserved characters . 16 7.1.3 Valid characters . 16 7.1.4 Undefined characters . 16 7.1.5 Character symbols . 16 7.2 Fields . 16 7.2.1 String . 16 7.2.2 Address field . 16 7.2.3 Data fields . 17 7.2.4 Checksum field . 18 7.2.5 Sequential message identifier field . 18 7.3 Sentences. 19 7.3.1 General structure . 19 7.3.2 Description of approved sentences . 19 7.3.3 Parametric sentences . 20 7.3.4 Encapsulation sentences . 21 7.3.5 Query sentences . 23 7.3.6 Proprietary sentences . 23 7.3.7 Command sentences . 24 7.3.8 Valid sentences . 25 7.3.9 Multi-sentence messages . 25 SIST EN 61162-1:2017
IEC 61162-1:2016 IEC 2016 – 3 –
7.3.10 Sentence transmission timing . 25 7.3.11 Additions to approved sentences . 25 7.4 Error detection and handling
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.