EN 60034-30-1:2014

Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

IEC 60034-30-1:2014 specifies efficiency classes for single-speed electric motors that are rated according to IEC 60034-1 or IEC 60079-0, for operation on a sinusoidal voltage supply. This standard establishes a set of limit efficiency values based on frequency, number of poles and motor power. No distinction is made between motor technologies, supply voltage or motors with increased insulation designed specifically for converter operation even though these motor technologies may not all be capable of reaching the higher efficiency classes. This makes different motor technologies fully comparable with respect to their energy efficiency potential.

Drehende elektrische Maschinen - Teil 30-1: Wirkungsrad-Klassifizierung von netzgespeisten Drehstrommotoren (IE-Code)

Machines électriques tournantes - Partie 30-1: Classes de rendement pour les moteurs à courant alternatif alimentés par le réseau (code IE)

L'IEC 60034-30-1:2014 spécifie les classes de rendement pour les moteurs électriques mono vitesse qui sont classés conformément à la CEI 60034-1 ou à la CEI 60079-0. Ces moteurs sont classés pour fonctionner avec une tension d'alimentation sinusoïdale. La présente norme définit un ensemble de valeurs limites de rendement en se basant sur la fréquence, le nombre de pôles et la puissance du moteur. Aucune distinction n'est établie entre les technologies de moteur, la tension d'alimentation ou les moteurs ayant une isolation renforcée, conçus en particulier pour le fonctionnement des convertisseurs, même si ces technologies de moteur peuvent ne pas être toutes en mesure d'atteindre les classes de rendement supérieures. Ceci permet de comparer entièrement des technologies de moteur différentes en fonction de leur potentiel de rendement énergétique.

Električni rotacijski stroji - 30-1. del: Razredi izkoristka enohitrostnih trifaznih motorjev s kratkostično kletko (koda IE) (IEC 60034-30-1:2014)

Standard EN IEC 60034-30-1 določa razrede izkoristkov za enohitrostne električne motorje v skladu s standardom IEC 60034-1 ali IEC 60079-0, ki so opredeljeni za delovanje pri sinusnem napetostnem napajanju in: • imajo nazivno moč PN od 0,12 kW do 1.000 kW; • imajo nazivno napetost od 50 V do največ 1 kV; • imajo 2, 4, 6 ali 8 polov; • lahko neprekinjeno delujejo pri nazivni moči in povišanju temperature v okviru podanega temperaturnega razreda izolacije; • so označeni s poljubno temperaturo okolice v razponu od -20 °C do + 60 °C; • so označeni z nadmorsko višino do največ 4.000 m.

General Information

• Status: Published
• Publication Date: 05-Jun-2014
• Withdrawal Date: 09-Apr-2017
• ICS: 29.160 - Rotating machinery
• Technical Committee: CLC/TC 2 - Rotating machinery
• Drafting Committee: IEC/TC 2 - IEC_TC_2
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 06-Jun-2014
• Completion Date: 06-Jun-2014
• Ref Project: SIST EN 60034-30-1:2014 - Rotating electrical machines - Part 30-1: Efficiency classes of single-speed, three-phase, cage-induction motors (IE code) (IEC 60034-30-1:2014)

Relations

• Replaces: EN 60034-30:2009 - Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
• Effective Date: 29-Jan-2023
• Replaces: CLC/TS 60034-31:2011 - Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide
• Effective Date: 29-Jan-2023
• Revised: prEN IEC 60034-30-1:2024 - Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
• Effective Date: 20-Feb-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2014
1DGRPHãþD
SIST EN 60034-30:2009
(OHNWULþQLURWDFLMVNLVWURMLGHO5D]UHGLL]NRULVWNDHQRKLWURVWQLKWULID]QLK
PRWRUMHYVNUDWNRVWLþQRNOHWNRNRGD,(,(&
Rotating electrical machines - Part 30-1: Efficiency classes of single-speed, three-phase,
cage-induction motors (IE code) (IEC 60034-30-1:2014)
Drehende elektrische Maschinen - Teil 30-1: Wirkungrad-Klassifizierung von
netzgespeisten Drehstrommotoren (IE-Code) (IEC 60034-30-1:2014)
Machines électriques tournantes - Partie 30-1: Classes de rendement pour les moteurs à
courant alternatif alimentés par le réseau (Code IE) (IEC 60034-30-1:2014)
Ta slovenski standard je istoveten z: EN 60034-30-1:2014
ICS:
29.160.30 Motorji Motors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60034-30-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2014
ICS 29.160 Supersedes EN 60034-30:2009,
CLC/TS 60034-31:2011 (partially)
English Version
Rotating electrical machines - Part 30-1: Efficiency classes of
line operated AC motors (IE code)
(IEC 60034-30-1:2014)
Machines électriques tournantes - Partie 30-1: Classes de Drehende elektrische Maschinen - Teil 30-1: Wirkungrad-
rendement pour les moteurs à courant alternatif alimentés Klassifizierung von netzgespeisten Drehstrommotoren
par le réseau (code IE) (IE-Code)
(CEI 60034-30-1:2014) (IEC 60034-30-1:2014)
This European Standard was approved by CENELEC on 2014-04-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60034-30-1:2014 E
Foreword
The text of document 2/1729/FDIS, future edition 1 of IEC 60034-30-1, prepared by IEC/TC 2
"Rotating machinery" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 60034-30-1:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-01-10
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-04-10
the document have to be withdrawn

This document supersedes EN 60034-30:2009 and partially supersedes CLC/TS 60034-31:2011
(Annex A).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60034-30-1:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60034-5 NOTE Harmonized as EN 60034-5.
IEC 60034-12 NOTE Harmonized as EN 60034-12.
IEC/TS 60034-31:2010 NOTE Harmonized as CLC/TS 60034-31:2011 (not modified).

- 3 - EN 60034-30-1:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60034-1 -  Rotating electrical machines EN 60034-1 -
Part 1: Rating and performance
IEC 60034-2-1 -  Rotating electrical machines EN 60034-2-1 -
Part 2-1: Standard methods for
determining losses and efficiency from
tests (excluding machines for traction
vehicles)
IEC 60034-6 -  Rotating electrical machines EN 60034-6 -
Part 6: Methods of cooling (IC Code)
IEC 60038 -  IEC standard voltages EN 60038 -
IEC 60079-0 -  Explosive atmospheres EN 60079-0 -
Part 0: Equipment - General
requirements
IEC/TS 60034-2-3 -  Rotating electrical machines - -
Part 2-3: Specific test methods for
determining losses and efficiency of
converter-fed AC induction motors
IEC/TS 60034-25 -  Rotating electrical machines CLC/TS 60034-25 -
Part 25: Guidance for the design and
performance of a.c. motors specifically
designed for converter supply
IEC 60034-30-1 ®
Edition 1.0 2014-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Rotating electrical machines –

Part 30-1: Efficiency classes of line operated AC motors (IE code)

Machines électriques tournantes –

Partie 30-1: Classes de rendement pour les moteurs à courant alternatif

alimentés par le réseau (code IE)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 29.160 ISBN 978-2-8322-1415-2

– 2 – IEC 60034-30-1:2014 © IEC 2014
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 8
3 Terms, definitions and symbols . 9
3.1 Terms and definitions . 9
3.2 Symbols . 9
4 Fields of application . 10
5 Efficiency. 11
5.1 Determination . 11
5.1.1 General . 11
5.1.2 Rated voltages, rated frequencies and rated power . 11
5.1.3 Auxiliary devices . 12
5.2 Rating . 12
5.3 Classification and marking . 13
5.3.1 General . 13
5.3.2 Efficiency classification . 13
5.3.3 Motors below IE1 efficiency . 13
5.3.4 Marking . 13
5.4 Nominal limits for efficiency classes IE1, IE2, IE3 and IE4 . 13
5.4.1 Nominal efficiency limits for IE1 . 14
5.4.2 Nominal efficiency limits for IE2 . 16
5.4.3 Nominal efficiency limits for IE3 . 18
5.4.4 Nominal efficiency limits for IE4 . 20
5.4.5 Interpolation of nominal efficiency limits of intermediate rated
powers for 50 Hz mains supply frequency . 21
5.4.6 Interpolation of nominal efficiency limits of intermediate rated
powers for 60 Hz mains supply frequency . 23
Annex A (informative) Nominal limits for efficiency class IE5 . 24
Bibliography . 25

Table 1 – Motor technologies and their energy-efficiency potential . 10
Table 2 – IE-Efficiency classification . 13
Table 3 – Nominal efficiency limits (%) for 50 Hz IE1 . 14
Table 4 – Nominal efficiency limits (%) for 60 Hz IE1 . 15
Table 5 – Nominal efficiency limits (%) for 50 Hz IE2 . 16
Table 6 – Nominal efficiency limits (%) for 60 Hz IE2 . 17
Table 7 – Nominal efficiency limits (%) for 50 Hz IE3 . 18
Table 8 – Nominal efficiency limits (%) for 60 Hz IE3 . 19
Table 9 – Nominal efficiency limits (%) for 50 Hz IE4 . 20
Table 10 – Nominal efficiency limits (%) for 60 Hz IE4 . 21
Table 11 – Interpolation coefficients for 0,12 kW up to 0,74 kW . 22
Table 12 – Interpolation coefficients for 0,75 kW up to 200 kW . 22

IEC 60034-30-1:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ROTATING ELECTRICAL MACHINES –

Part 30-1: Efficiency classes of line operated AC motors (IE code)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) N
...