EN 62430:2009
(Main)Environmentally conscious design for electrical and electronic products
Environmentally conscious design for electrical and electronic products
IEC 62430:2009 specifies requirements and procedures to integrate environmental aspects into design and development processes of electrical and electronic products, including combination of products, and the materials and components of which they are composed. It has the status of a horizontal standard in accordance with IEC Guide 108.
Umweltbewusstes Gestalten von elektrischen und elektronischen Produkten
Eco-conception pour les produits électriques et électroniques
La CEI 62430:2009 spécifie les exigences et les procédures destinées à intégrer les aspects environnementaux dans les processus de conception et de développement des produits électriques et électroniques, y compris les combinaisons de produits, et des matériaux et éléments constituants qui les composent. Elle a le statut de norme horizontale conformément au Guide 108.
Načrtovanje električnih in elektronskih proizvodov glede na okoljske vidike (IEC 62430:2009)
Ta mednarodni standard opredeljuje zahteve in postopke za integracijo okoljskih vidikov v procese načrtovanja in razvoja električnih in elektronskih proizvodov, vključno s kombinacijo proizvodov ter materialov in komponent, iz katerih so sestavljeni (v nadaljevanju proizvodi).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Umweltbewusstes Gestalten von elektrischen und elektronischen ProduktenEco-conception pour les produits électriques et électroniquesEnvironmentally conscious design for electrical and electronic products31.020Elektronske komponente na splošnoElectronic components in general29.020Elektrotehnika na splošnoElectrical engineering in general13.020.30Ocenjevanje vpliva na okoljeEnvironmental impact assessmentICS:Ta slovenski standard je istoveten z:EN 62430:2009SIST EN 62430:2010en,fr01-januar-2010SIST EN 62430:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 62430 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62430:2009 E
ICS 13.020; 43.040.10
English version
Environmentally conscious design
for electrical and electronic products (IEC 62430:2009)
Eco-conception pour les produits électriques et électroniques (CEI 62430:2009)
Umweltbewusstes Gestalten von elektrischen und elektronischen Produkten(IEC 62430:2009)
This European Standard was approved by CENELEC on 2009-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
at national level by publication of an identical
national standard or by endorsement
(dop) 2010-02-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2012-05-01 __________ Endorsement notice The text of the International Standard IEC 62430:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: ISO 9000 NOTE
Harmonized as EN ISO 9000:2005 (not modified). ISO 9001 NOTE
Harmonized as EN ISO 9001:2008 (not modified). ISO 14001 NOTE
Harmonized as EN ISO 14001:2004 (not modified). ISO 14040 NOTE
Harmonized as EN ISO 14040:2006 (not modified). __________
IEC 62430Edition 1.0 2009-02INTERNATIONAL STANDARD NORME INTERNATIONALEEnvironmentally conscious design for electrical and electronic products
Eco-conception pour les produits électriques et électroniques
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE UICS 13.020; 43.040.10 PRICE CODECODE PRIXISBN 2-8318-1032-7
– 2 – 62430 © IEC:2009 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Fundamentals of environmentally conscious design (ECD).8 4.1 General.8 4.2 Life cycle thinking.8 4.3 Regulatory and stakeholders’ requirements.9 4.4 Integration into management system.9 5 Environmentally conscious design process (ECD process).9 5.1 General.9 5.2 Analysis of regulatory and stakeholders’ environmental requirements.10 5.3 Identification and evaluation of environmental aspects and corresponding impacts.10 5.4 Design and development.11 5.5 Review and continual improvement.11 5.6 Information sharing for ECD.11
Annex A (informative)
Fundamentals of environmentally conscious design.13 Annex B (informative)
Elaboration of environmentally conscious design process (ECD process).16 Annex C (informative)
Examples categories of tools.26 Bibliography.29
Figure A.1 – Overview of ECD process.13 Figure B.1 – Examples of environmental impacts associated with a product’s inputs, outputs and life cycle stages.20 Figure B.2 – Example of the integration of environmental aspects into the design and development process.24 Figure B.3 – Information sharing and collaboration along the supply chain for ECD processes.25
Table B.1 – Examples of procedures for ECD Process.16 Table B.2 – Life cycle stages and examples of environmental aspects for the identification of the significant life cycle stages and environmental aspects.21 Table C.1 – Overview of tools which can be used in ECD.26
62430 © IEC:2009 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ENVIRONMENTALLY CONSCIOUS DESIGN FOR
ELECTRICAL AND ELECTRONIC PRODUCTS
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62430 has been prepared by IEC technical committee 111: Environmental standardization for electrical and electronic products and systems. It has the status of a horizontal standard in accordance with IEC Guide 108. The text of this standard is based on the following documents: CDV Report on voting 111/104/CDV 111/124/RVC
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. SIST EN 62430:2010
– 4 – 62430 © IEC:2009 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
62430 © IEC:2009 – 5 – INTRODUCTION Every product has an effect on the environment, which may occur at any or all stages of its life cycle – raw-material acquisition, manufacture, distribution, use, maintenance, re-use and end of life. These effects may range from slight to significant; they may be short-term or long-term; and they may occur at the local, national, regional or global level (or a combination thereof). The widespread use of electrical and electronic products has drawn increased awareness to their environmental impacts. As a result, legislation, as well as market-driven requirements for environmentally conscious design, are emerging. The goal of environmentally conscious design is the reduction of adverse environmental impacts of a product throughout its entire life cycle. This can involve balancing the environmental aspects of the product with other factors, such as its intended use, performance, cost, marketability and quality, and choosing methods to meet legal and regulatory requirements in the most environmentally friendly way. In striving for this goal, multiple benefits can be achieved for the organization, its customers and other stakeholders. Environmentally conscious design is not a separate design activity; rather, it is an integral part of the existing design process. The "design" in this context includes the activities associated with the processes of product planning, development and decision-making as well as the creation of policies within the organization. The impetus to create an International Standard was triggered by common circumstances impacting many industries in the global marketplace, since the compositional elements of a product (such as materials, components and services) are provided across national borders. The existence of an International Standard provides for a consistent approach to life cycle management. This International Standard is intended for use by all those involved in the design and development of electrical and electronic products. This includes all parties in the supply chain regardless of organization type, size, location and complexity. It is applicable for all types of products, new as well as modified. Sector-specific documents may be developed to address needs not covered in this standard. The use of this standard as a base reference is encouraged so as to ensure consistency throughout the electrotechnical sector. This International Standard provides a set of requirements for the process of environmentally conscious design reflecting the contents of IEC Guide 114 and ISO/TR 14062. SIST EN 62430:2010
– 6 – 62430 © IEC:2009 ENVIRONMENTALLY CONSCIOUS DESIGN FOR
ELECTRICAL AND ELECTRONIC PRODUCTS
1 Scope This International Standard specifies requirements
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.