EN 60793-2-30:2009
(Main)Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
Applies to optical fibre types A3a, A3b, A3c and A3d. It covers requirements common to A3 multimode fibres. It also covers particular requirements for individual fibre types and specific applications. The main changes from the previous edition are: the addition of tensile strength requirement; the removal of water immersion requirement; and the addition of environmental requirements.
Lichtwellenleiter - Teil 2-30: Produktspezifikationen - Rahmenspezifikation für Mehrmodenfasern der Kategorie A3
Fibres optiques - Partie 2-30: Spécifications de produit - Spécification intermédiaire pour les fibres multimodales de catégorie A3
S'applique aux fibres optiques de type A3a, A3b, A3c et A3d. Elle couvre des prescriptions communes aux fibres multimodales de catégorie A3. Elle couvre aussi des prescriptions particulières applicables à des types particuliers de fibres et à des applications données. Les principaux changements par rapport à l'édition précédente sont: adjonction d'exigences concernant la contrainte à la traction; suppression des exigences concernant l'immersion dans l'eau; et adjonction d'exigences d'environnement.
Optična vlakna - 2-30. del: Specifikacije izdelka - Področna specifikacija za večrodna vlakna kategorije A3 (IEC 60793-2-30:2007)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Teil 2-30: Produktspezifikationen - Rahmenspezifikation für Mehrmodenfasern der Kategorie A3
(IEC 60793-2-30:2007)Fibres optiques - Partie 2-30: Spécifications de produit - Spécification intermédiaire pour les fibres multimodales de catégorie A3
(CEI 60793-2-30:2007)Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (IEC 60793-2-30:2007)33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 60793-2-30:2009SIST EN 60793-2-30:2009en,fr01-junij-2009SIST EN 60793-2-30:2009SLOVENSKI
STANDARDSIST EN 60793-2-30:20041DGRPHãþD
EUROPEAN STANDARD EN 60793-2-30 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-2-30:2009 E
ICS 33.180.10 Supersedes EN 60793-2-30:2002
English version
Optical fibres -
Part 2-30: Product specifications -
Sectional specification for category A3 multimode fibres (IEC 60793-2-30:2007)
Fibres optiques -
Partie 2-30: Spécifications de produit -
Spécification intermédiaire
pour les fibres multimodales
de catégorie A3 (CEI 60793-2-30:2007)
Lichtwellenleiter -
Teil 2-30: Produktspezifikationen -
Rahmenspezifikation
für Mehrmodenfasern
der Kategorie A3 (IEC 60793-2-30:2007)
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
at national level by publication of an identical
national standard or by endorsement
(dop)
2010-01-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2012-04-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60793-2-30:2007 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60793-1-1 NOTE
Harmonized as EN 60793-1-1:2008 (not modified). __________ SIST EN 60793-2-30:2009
– 3 – EN 60793-2-30:2009
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60793-1-20 - 1) Optical fibres -
Part 1-20: Measurement methods and test procedures - Fibre geometry EN 60793-1-20 2002 2)
IEC 60793-1-21 - 1) Optical fibres -
Part 1-21: Measurement methods and test procedures - Coating geometry EN 60793-1-21 2002 2)
IEC 60793-1-22 - 1) Optical fibres -
Part 1-22: Measurement methods and test procedures - Length measurement EN 60793-1-22 2002 2)
IEC 60793-1-30 - 1) Optical fibres -
Part 1-30: Measurement methods and test procedures - Fibre proof test EN 60793-1-30 2002 2)
IEC 60793-1-31 - 1) Optical fibres -
Part 1-31: Measurement methods and test procedures - Tensile strength EN 60793-1-31 2002 2)
IEC 60793-1-40 (mod) - 1) Optical fibres -
Part 1-40: Measurement methods and test procedures - Attenuation EN 60793-1-40 2003 2)
IEC 60793-1-41 - 1) Optical fibres -
Part 1-41: Measurement methods and test procedures - Bandwidth EN 60793-1-41 2003 2)
IEC 60793-1-46 - 1) Optical fibres -
Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance EN 60793-1-46 2002 2)
IEC 60793-1-50 - 1) Optical fibres -
Part 1-50: Measurement methods and test procedures - Damp heat (steady state) EN 60793-1-50 2002 2)
IEC 60793-1-51 - 1) Optical fibres -
Part 1-51: Measurement methods and test procedures - Dry heat EN 60793-1-51 2002 2)
IEC 60793-1-52 - 1) Optical fibres -
Part 1-52: Measurement methods and test procedures - Change of temperature EN 60793-1-52 2002 2)
IEC 60793-2 - 1) Optical fibres -
Part 2: Product specifications - General EN 60793-2 2008 2)
1) Undated reference.
2) Valid edition at date of issue.
IEC 60793-2-30Edition 2.0 2007-08INTERNATIONAL STANDARD NORME INTERNATIONALEOptical fibres – Part 2-30: Product specifications – Sectional specification for category A3 multimode fibres
Fibres optiques – Partie 2-30: Spécifications de produits – Spécification intermédiaire pour les fibres multimodales de catégorie A3
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE NICS 33.180.10 PRICE CODECODE PRIXISBN 2-8318-9267-8SIST EN 60793-2-30:2009
– 2 – 60793-2-30 © IEC:2007
CONTENTS FOREWORD.3
1 Scope .5 2 Normative references.5 3 Specifications.6 3.1 General.6 3.2 Dimensional requirements.6 3.3 Mechanical requirements.7 3.4 Transmission requirements.7 3.5 Environmental requirements.8
Annex A (normative)
Family specifications for A3a multimode fibres.9 Annex B (normative)
Family specifications for A3b multimode fibres.10 Annex C (normative)
Family specifications for A3c multimode fibres.11 Annex D (normative)
Family specifications for A3d multimode fibres.13
Bibliography.15
Table 1 – Relevant dimensional attributes and measurement methods.6 Table 2 – Dimensional requirements common to category A3 fibres.6 Table 3 – Additional dimensional attributes required in family specifications.7 Table 4 – Relevant mechanical attributes and test methods.7 Table 5 – Mechanical requirements common to category A3 fibres.7 Table 6 – Relevant transmission attributes and measurement methods.7 Table 7 – Additional transmission attributes required in the family specifications.8 Table 8 – Relevant environmental attributes and test methods.8 Table A.1 – Dimensional requirements specific to A3a fibres.9 Table A.2 – Mechanical requirements specific to A3a fibres.9 Table A.3 – Transmission requirements specific to A3a fibres.9 Table B.1 – Dimensional requirements specific to A3b fibres.10 Table B.2– Mechanical requirements specific to A3b fibres.10 Table B.3 –Transmission requirements specific to A3b fibres.10 Table C.1 – Dimensional requirements specific to A3c fibres.11 Table C.2 – Mechanical requirements specific to A3c fibres.11 Table C.3 –Transmission requirements specific to A3c fibres.11 Table C.4.1 – Environmental exposure tests.12 Table C.4.2 – Attributes measured.12 Table D.1 – Dimensional requirements specific to A3d fibres.13 Table D.2 – Mechanical requirements specific to A3d fibres.13 Table D.3 – Transmission requirements specific to A3d fibres.13 Table D.4.1 – Environmental exposure tests.14 Table D.4.2 – Attributes measured.14
60793-2-30 © IEC:2007 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
OPTICAL FIBRES −
Part 2-30: Product specifications –
Sectional specification for category A3 multimode fibres
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60793-2-30 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition, published in 2002. It constitutes a technical revision. The main changes from the previous edition are: – the addition of tensile strength requirement; – the removal of water immersion requirement; – the addition of environmental requirements.
– 4 – 60793-2-30 © IEC:2007
The text of this standard is based on the following documents: CDV Report on voting 86A/1130/CDV 86A/1150/RVC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.