EN 62453-303-2:2009/A1:2017

Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP3/6

FprEN 62453-3X (65C/336/CDV) split in 6 parts: EN 62453-302, 62453-309, 62453-301/A1, 62453-303-1/A1, 62453-303-2/A1, 62453-315/A1

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-2: Integration von Kommunikationsprofilen - Kommunikationsprofile (CP) 3/4, 3/5 und 3/6 nach IEC 61784

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-2: Intégration des profils de communication - CP 3/4, CP 3/5 er CP 3/6 de l'IEC 61784

Specifikacija vmesnika orodja procesne naprave - 303-2. del: Integracija komunikacijskih profilov - IEC 61784 CP 3/4, CP 3/5 in CP 3/6 - Dopolnilo 1 (IEC 62453-303-2:2009/A1:2016)

General Information

• Status: Published
• Publication Date: 23-Nov-2017
• Withdrawal Date: 23-Nov-2020
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 24-Nov-2017
• Completion Date: 24-Nov-2017
• Ref Project: SIST EN 62453-303-2:2010/A1:2018 - Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP3/6 (IEC 62453-303-2:2009/A1:2016)

Relations

• Amends: EN 62453-303-2:2009 - Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
• Effective Date: 13-Nov-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62453-303-2:2010/A1:2018
01-februar-2018
Specifikacija vmesnika orodja procesne naprave - 303-2. del: Integracija
komunikacijskih profilov - IEC 61784 CP 3/4, CP 3/5 in CP 3/6 - Dopolnilo 1 (IEC
62453-303-2:2009/A1:2016)
Field device tool (FDT) interface specification - Part 303-2: Communication profile
integration - IEC 61784 CP 3/4, CP 3/5 and CP3/6 (IEC 62453-303-2:2009/A1:2016)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-2: Integration von
Kommunikationsprofilen - Kommunikationsprofile (CP) 3/4, 3/5 und 3/6 nach IEC 61784
(IEC 62453-303-2:2009/A1:2016)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-2:
Intégration des profils de communication - CP 3/4, CP 3/5 er CP 3/6 de l'IEC 61784 (IEC
62453-303-2:2009/A1:2016)
Ta slovenski standard je istoveten z: EN 62453-303-2:2009/A1:2017
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-303-2:2010/A1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62453-303-2:2010/A1:2018

---------------------- Page: 2 ----------------------

SIST EN 62453-303-2:2010/A1:2018


EUROPEAN STANDARD EN 62453-303-2:2009/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2017
ICS 25.040.40; 35.100.05; 35.110

English Version
Field device tool (FDT) interface specification - Part 303-2:
Communication profile integration - IEC 61784 CP 3/4, CP 3/5
and CP3/6
(IEC 62453-303-2:2009/A1:2016)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 303-2: Intégration des profils de 303-2: Integration von Kommunikationsprofilen -
communication - CP 3/4, CP 3/5 et CP 3/6 de l'IEC 61784 Kommunikationsprofile (CP) 3/4, 3/5 und 3/6 nach IEC
(IEC 62453-303-2:2009/A1:2016) 61784
(IEC 62453-303-2:2009/A1:2016)
This amendment A1 modifies the European Standard EN 62453-303-2:2009; it was approved by CENELEC on 2016-07-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62453-303-2:2009/A1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62453-303-2:2010/A1:2018
EN 62453-303-2:2009/A1:2017 (E)
European foreword
The text of document 65E/336/CDV, future IEC 62453-303-2:2009/A1, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN
62453-303-2:2009/A1:2017.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-05-24
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-11-24
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62453-303-2:2009/A1:2016 was approved by CENELEC as
a European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 62453-303-2:2010/A1:2018



IEC 62453-
...