EN 60763-2:2007/A1:2023

Specification for laminated pressboard - Part 2: Methods of test

Bestimmung für Blockspan - Teil 2: Prüfverfahren

Spécification pour cartons comprimés et contrecollés - Partie 2: Méthodes d'essai

Specifikacija za laminirani prešpan - 2. del: Preskusne metode - Dopolnilo A1 (IEC 60763-2:2007/AMD1:2023)

General Information

• Status: Published
• Publication Date: 21-Dec-2023
• ICS: 17.220.99 - Other standards related to electricity and magnetism
• ICS: 29.035.10 - Paper and board insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Dec-2023
• Completion Date: 22-Dec-2023
• Ref Project: SIST EN 60763-2:2007/A1:2024 - Specification for laminated pressboard - Part 2: Methods of test (IEC 60763-2:2007/AMD1:2023)

Relations

• Amends: EN 60763-2:2007 - Specification for laminated pressboard - Part 2: Methods of test
• Effective Date: 03-Jul-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60763-2:2007/A1:2024
01-februar-2024
Specifikacija za laminirani prešpan - 2. del: Preskusne metode - Dopolnilo A1 (IEC
60763-2:2007/AMD1:2023)
Specification for laminated pressboard - Part 2: Methods of test (IEC 60763-
2:2007/AMD1:2023)
Bestimmung für Blockspan - Teil 2: Prüfverfahren (IEC 60763-2:2007/AMD1:2023)
Spécification pour cartons comprimés et contrecollés - Partie 2: Méthodes d'essai (IEC
60763-2:2007/AMD1:2023)
Ta slovenski standard je istoveten z: EN 60763-2:2007/A1:2023
ICS:
29.035.10 Papirni in kartonski izolacijski Paper and board insulating
materiali materials
SIST EN 60763-2:2007/A1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60763-2:2007/A1:2024

---------------------- Page: 2 ----------------------
SIST EN 60763-2:2007/A1:2024


EUROPEAN STANDARD EN 60763-2:2007/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM December 2023
ICS 17.220.99; 29.035.10

English Version
Specification for laminated pressboard - Part 2: Methods of test
(IEC 60763-2:2007/AMD1:2023)
Spécification pour cartons comprimés et contrecollés - Bestimmung für Blockspan - Teil 2: Prüfverfahren
Partie 2: Méthodes d'essai (IEC 60763-2:2007/AMD1:2023)
(IEC 60763-2:2007/AMD1:2023)
This amendment A1 modifies the European Standard EN 60763-2:2007; it was approved by CENELEC on 2023-12-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60763-2:2007/A1:2023 E

---------------------- Page: 3 ----------------------
SIST EN 60763-2:2007/A1:2024
EN 60763-2:2007/A1:2023 (E)
European foreword
The text of document 15/1018/FDIS, future IEC 60763-2/AMD1, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60763-2:2007/A1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-19
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60763-2:2007/AMD1:2023 was approved by CENELEC as
a European Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN 60763-2:2007/A1:2024




IEC 60763-2

®


Edition 2.0 2023-11




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Amendment 1: Specification for laminated pressboard –

Part 2: Methods of test




Amendement 1: Spécification pour cartons comprimés et contrecollés –

Partie 2: Méthodes d'essai















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE





ICS 17.220.99, 29.035.10 ISBN 978-2-8322-7823-9




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Reg
...