IEC TS 62836:2020(E) provides an efficient and reliable procedure to test the internal electric field in the insulating materials used for high-voltage applications, using the pressure wave propagation (PWP) method. It is suitable for a sample with homogeneous insulating materials and an electric field higher than 1 kV/mm, but it is also dependent on the thickness of the sample and the pressure wave generator.

    • sale 15% off
    • Technical specification
      28 pages
      English language

IEC TS 62749:2020 is available as IEC TS 62749:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TS 62749:2020 specifies the expected characteristics of electricity at the SUPPLY TERMINALS of public low, medium and high voltage, 50 Hz or 60 Hz, networks.
NOTE 1 The boundaries between the various voltage levels can be different for different countries/regions. In the context of this TS...
view more

    • sale 15% off
    • Technical specification
      58 pages
      English language

IEC TR 61340-5-4:2019(E) describes compliance verification testing for technical items that are included in ESD control programs, such as those specified in IEC 61340-5-1.
Test methods, in the main body of this document, are based on those specified in IEC 61340-5-1 and other parts of IEC 61340, and are simplified where necessary for the purposes of compliance verification, to be performed by competent personnel.
Additional compliance verification tests and procedures within the scope of this ...
view more

    • sale 15% off
    • Technical report
      78 pages
      English language

This part of IEC 62631 covers procedures for the determination of insulation resistance and volume resistivity of insulating materials by applying DC-voltage and temperatures up to 800 °C. The typical application materials include high temperature mica plate and alumina ceramics.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

IEC 62631-3-4:2019 covers procedures for the determination of insulation resistance and volume resistivity of insulating materials by applying DC-voltage and temperatures up to 800 °C. The typical application materials include high temperature mica plate and alumina ceramics.
This edition of IEC 62631-3-4 cancels and replaces IEC 60345 “Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures”, published in 1971. This edition constitutes a techni...
view more

    • sale 15% off
    • Standard
      28 pages
      English and French language

IEC TR 61340-5-5:2018(E) discusses packaging material requirements for electrostatic discharge sensitive items (ESDS) as well as non–ESDS which can apply to packaging materials such as embossed carrier tape, trays, tubes (stick magazines), rails and others used in back end line processing and parts handling where test methods described in other standards are, for the most part, inadequate. Issues related to electrostatic charge generation, electrostatic attraction and repulsion are included. The...view more

    • sale 15% off
    • Technical report
      34 pages
      English language

This part of IEC 61340 applies to facilities that provide healthcare including hospitals, care
centres and clinics.
This document provides technical requirements and recommendations for controlling
electrostatic phenomena in healthcare facilities, which includes requirements for equipment,
materials, and products used to control static electricity.
The requirements of this document do not apply to medical electrical equipment specified in
IEC 60601-1 [1] 1 and in vitro diagnostic (IVD) med...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC 61340-6-1:2018 applies to facilities that provide healthcare including hospitals, care centres and clinics. This document provides technical requirements and recommendations for controlling electrostatic phenomena in healthcare facilities, which includes requirements for equipment, materials, and products used to control static electricity. The requirements of this document do not apply to medical electrical equipment specified in IEC 60601-1 and in vitro diagnostic (IVD) medical equipment s...view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC 61340-6-1:2018 applies to facilities that provide healthcare including hospitals, care centres and clinics. This document provides technical requirements and recommendations for controlling electrostatic phenomena in healthcare facilities, which includes requirements for equipment, materials, and products used to control static electricity. The requirements of this document do not apply to medical electrical equipment specified in IEC 60601-1 and in vitro diagnostic (IVD) medical equipment s...view more

    • sale 15% off
    • Standard
      45 pages
      English and French language

IEC 61375-2-6:2018 establishes the specification for the communication between the on-board subsystems and the ground subsystems. The communication system, interfaces and protocols are specified as a mobile communication function, using any available wireless technology. This document provides requirements in order to:
a) select the wireless network on the basis of QoS parameters requested by the application;
b) allow TCMS and/or OMTS applications, installed on-board and communicating on the o...
view more

    • sale 15% off
    • Standard
      242 pages
      English and French language

This part of IEC 61340 specifies requirements for flexible intermediate bulk containers (FIBC)
between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres.
The explosive atmosphere can be created by the contents in the FIBC or can exist outside the
FIBC.
The requirements include:
– classification and labelling of FIBC;
– classification of inner liners;
– specification of test methods for each type of FIBC, inner liner, labels and document
pockets;
– design an...
view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

IEC 62631-2-1:2018 describes test methods for the determination of permittivity and dissipation factor properties of solid insulating materials (AC methods from 0,1 Hz up to 10 MHz). This first edition cancels and replaces the first edition IEC 60250, published in 1969. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a. technical frequencies confined to AC methods; b. update on measurements on ...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61340 specifies test methods for evaluating electrostatic protection provided
by a system of footwear and flooring in combination with a person.
Test results are valid only for the specific footwear and flooring combination tested.
The test methods are not intended for individual product qualification purposes.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

NEW!IEC 61340-4-4:2018 is available as IEC 61340-4-4:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61340-4-4:2018 specifies requirements for flexible intermediate bulk containers (FIBC) between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres. The explosive atmosphere can be created by the contents in the FIBC or can exist outside the FIBC. The requirem...
view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61340 describes a test method for determining the electrical resistance of
footwear (shoes, slippers or booties) used in the control of electrostatic potential on people.
This document is suitable for use by the manufacturer of footwear as well as the end user. A
method for measuring the electrical resistance of footwear alone is described and serves as a
qualification test or an acceptance test for new footwear, or as a periodic test of in-use
footwear.
Although this docu...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

IEC TR 61340-5-2:2018 is available as IEC TR 61340-5-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 61340-5-2:2018, which has been developed to support IEC 61340-5-1, applies to activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment with withstand volt...
view more

    • sale 15% off
    • Technical report
      93 pages
      English language

IEC 62631-3-11:2018 covers a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying DC voltage. It covers the materials described in IEC 60455-3-5, IEC 60464-3-1, IEC 60464-3-2 and similar products.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day