EN 61290-10-2:2008

Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer

Applies to optical fibre amplifiers (OFA) using active fibres, containing rare-earth dopants, currently commercially available. The object is to establish uniform requirements for accurate and reliable measurements of the signal-spontaneous noise figure as defined in IEC 61291-1.The test method described is, in general, for multichannel applications. Single-channel applications are a special case of multichannel applications. This second edition cancels and replaces the first edition. It is a technical revision with updated references and cautions on proper use of the procedure.

Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 10-2: Mehrkanalparameter - Pulsmethode bei Verwendung eines ausblendbaren optischen Spektralanalysators

Amplificateurs optiques - Méthodes d'essai - Partie 10-2: Paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique

S'applique aux amplificateurs à fibres optiques (AFO) utilisant des fibres actives, dopées aux terres rares, qui sont actuellement disponibles sur le marché. Etablit des prescriptions uniformes en vue de mesures précises et fiables du facteur de bruit signal/émission spontanée défini en CEI 61291-1. La méthode d'essai décrite est, en général, destinée à des applications à canaux multiples. Les applications à canal unique constituent un cas spécial d'applications à canaux multiples. Cette seconde édition de la CEI 61290-10-2 annule et remplace la première édition. C'est une révision technique avec des références et des précautions relatives à l'utilisation convenable du procédé mises à jour.

Optični ojačevalniki - Preskusne metode - 10-2. del: Parametri z več kanali - Metoda s pulzom pri uporabi izključevalnega optičnega spektralnega analizatorja (IEC 61290-10-2:2007)

General Information

• Status: Published
• Publication Date: 30-Jan-2008
• Withdrawal Date: 30-Sep-2010
• ICS: 33.180.30 - Optic amplifiers
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 31-Jan-2008
• Completion Date: 31-Jan-2008
• Ref Project: SIST EN 61290-10-2:2008 - Optical amplifiers - Test methods -- Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer

Relations

• Replaces: EN 61290-10-2:2003 - Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61290-10-2:2008
01-april-2008
1DGRPHãþD
SIST EN 61290-10-2:2004
2SWLþQLRMDþHYDOQLNL3UHVNXVQHPHWRGHGHO3DUDPHWUL]YHþNDQDOL
0HWRGDVSXO]RPSULXSRUDELL]NOMXþHYDOQHJDRSWLþQHJDVSHNWUDOQHJDDQDOL]DWRUMD
,(&
Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method
using a gated optical spectrum analyzer (IEC 61290-10-2:2007)
Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 10-2: Mehrkanalparameter -
Pulsmethode bei Verwendung eines ausblendbaren optischen Spektralanalysators (IEC
61290-10-2:2007)
Amplificateurs optiques - Méthodes d'essai - Partie 10-2: Parametres a canaux multiples
- Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique (CEI
61290-10-2:2007)
Ta slovenski standard je istoveten z: EN 61290-10-2:2008
ICS:
33.180.30
SIST EN 61290-10-2:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61290-10-2

NORME EUROPÉENNE
January 2008
EUROPÄISCHE NORM

ICS 33.180.30 Supersedes EN 61290-10-2:2003


English version


Optical amplifiers -
Test methods -
Part 10-2: Multichannel parameters -
Pulse method using a gated optical spectrum analyzer
(IEC 61290-10-2:2007)


Amplificateurs optiques -  Prüfverfahren für
Méthodes d'essai - Lichtwellenleiter-Verstärker -
Partie 10-2: Paramètres Teil 10-2: Mehrkanalparameter -
à canaux multiples - Pulsmethode bei Verwendung
Méthode d'impulsion utilisant un analyseur eines ausblendbaren optischen
de spectre optique stroboscopique Spektralanalysators
(CEI 61290-10-2:2007) (IEC 61290-10-2:2007)




This European Standard was approved by CENELEC on 2007-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61290-10-2:2008 E

---------------------- Page: 2 ----------------------

EN 61290-10-2:2008 - 2 -
Foreword
The text of document 86C/772/FDIS, future edition 2 of IEC 61290-10-2, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 61290-10-2 on 2007-10-01.
This European Standard supersedes EN 61290-10-2:2003.
EN 61290-10-2:2008 is a technical revision with updated references and cautions on proper use of the
procedure.
This standard is to be used in conjunction with EN 61291-1.
The following dates were fixed:

– latest date by which the EN has to be implemented

at national level by publication of an identical
(dop) 2008-08-01
national standard or by endorsement

– latest date by which the national standards conflicting
(dow) 2010-10-01
with the EN have to be withdrawn
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this document may involve the use of two patents.
One patent concerns a technique for determining the amplified spontaneous emission noise of an optical
amplifier in the presence of an optical signal given in Clause 4 and Clause 6.
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with the IEC. Information may be
obtained from:
Agilent Technologies
Palo A
...