EN 61076-4-111:2002

Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1

This publication also bears the number QC 480301XX0012 which is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ).

Steckverbinder für elektronische Einrichtungen - Teil 4-111: Steckverbinder für gedruckte Schaltungen mit bewerteter Qualität - Bauartspezifikation für indirekte Hochstromsteckverbindermodule mit Voreilung für gedruckte Schaltungen und Rückplatten im Raster 2,5 mm nach IEC 60917

Connecteurs pour équipements électroniques - Partie 4-111: Connecteurs pour cartes imprimées sous assurance de la qualité - Spécification particulière pour modules de connecteur de puissance à deux parties, pour cartes imprimées et panneaux arrière ayant les premières caractéristiques de couplage et une grille au pas de 2,5 mm conformément à la CEI 60917-1

Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 m mm in accordance with IEC 60917-1 (IEC 61076-4-111:2002)

General Information

• Status: Withdrawn
• Publication Date: 12-Jun-2002
• Withdrawal Date: 28-Feb-2005
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Ref Project: SIST EN 61076-4-111:2003 - Connectors for electronic equipment -- Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1

Standards Content (Sample)

SIST EN 61076-4-111:2003SLOVENSKIoktober 2003
STANDARDConnectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 m mm in accordance with IEC 60917-1 (IEC
61076-4-111:2002)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61076-4-111:2003(en)ICS31.220.10







EUROPEAN STANDARDEN 61076-4-111NORME EUROPÉENNEEUROPÄISCHE NORMJune 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61076-4-111:2002 EICS 31.220.10English versionConnectors for electronic equipmentPart 4-111: Printed board connectors with assessed quality -Detail specification for two-part power connector modules,for printed boards and backplanes having early mating features,and having a basic grid of 2,5 mm in accordance with IEC 60917-1(IEC 61076-4-111:2002)Connecteurs pour équipementsélectroniquesPartie 4-111: Connecteurs pour cartesimprimées sous assurance de la qualité -Spécification particulière pour modulesde connecteur de puissanceà deux parties, pour cartes impriméeset panneaux arrière ayant les premièrescaractéristiques de couplageet une grille au pas de 2,5 mmconformément à la CEI 60917-1(CEI 61076-4-111:2002)Steckverbinder für elektronischeEinrichtungenTeil 4-111: Steckverbinder für gedruckteSchaltungen mit bewerteter Qualität -Bauartspezifikation für indirekteHochstromsteckverbindermodulemit Voreilung für gedruckte Schaltungenund Rückplatten im Raster 2,5 mmnach IEC 60917(IEC 61076-4-111:2002)This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.



EN 61076-4-111:2002- 2 -ForewordThe text of document 48B/1123FDIS, future edition 1 of IEC 61076-4-111, prepared by SC 48B,Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronicequipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC asEN 61076-4-111 on 2002-03-01.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2002-12-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2005-03-01Annexes designated "normative" are part of the body of the standard.In this standard, annexes A and ZA are normative.Annex ZA has been added by CENELEC.__________Endorsement noticeThe text of the International Standard IEC 61076-4-111:2002 was approved by CENELEC as aEuropean Standard without any modification.__________



- 3 -EN 61076-4-111:2002Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevantEN/HD applies.PublicationYearTitleEN/HDYearIEC 60068-1- 1)Environmental testingPart 1: General and guidanceEN 60068-11994 2)IEC 60326-31991Printed boardsPart 3: Design and use of printedboards--IEC 60352-51995Solderless connectionsPart 5: Solderless press-in connections- General requirements, test methodsand practical
...