EN IEC 60268-22:2020

Sound system equipment - Part 22: Electrical and mechanical measurements on transducers

IEC 60268-22:2020 applies to transducers converting an electrical input signal into a mechanical or acoustical output signal. However, if the electrical input terminals and the surface of the radiator are accessible, this document can also apply to passive and active sound systems such as loudspeakers, headphones, TV-sets, multi-media devices, personal portable audio devices, automotive sound systems and professional equipment. This document describes only electrical and mechanical measurements that help assess the transfer behaviour of the device under test (DUT). This includes operating the DUT in both the small- and large-signal domains. The influence of the target application's acoustical boundary conditions (e.g. car interior) can also be considered in the physical evaluation of the sound system. Perception and cognitive evaluations of the reproduced sound and the impact of perceived sound quality are outside the scope of this document.

Elektroakustische Geräte - Teil 22: Elektrische und mechanische Messungen an Wandlern

Équipements pour systèmes électroacoustiques - Partie 22: Mesurages électriques et mécaniques sur transducteurs

L'IEC 60268-22:2020 s'applique aux transducteurs qui convertissent un signal d'entrée électrique en signal de sortie mécanique ou acoustique. Toutefois, si les bornes d'entrée électriques et la surface du radiateur sont accessibles, le présent document peut également s'appliquer aux systèmes électroacoustiques passifs et actifs tels que les haut parleurs, les casques d'écoute, les téléviseurs, les appareils multimédias, les appareils audio personnels portables, les systèmes électroacoustiques pour automobile et les équipements professionnels. Le présent document ne décrit que les mesurages électriques et mécaniques qui aident à évaluer le comportement de transfert de l'appareil soumis à l'essai (DUT). Cela comprend le fonctionnement du DUT dans les domaines des signaux faibles et des signaux forts. L'influence des conditions de limite acoustique de l'application visée (par exemple, habitacle d'un véhicule) peut également être prise en considération dans l'évaluation physique du système électroacoustique. La perception et les évaluations cognitives du son reproduit et l'impact de la qualité acoustique perçue n'entrent pas dans le domaine d'application du présent document.

Oprema zvokovnega sistema - 22. del: Električne in mehanske meritve na pretvornikih (IEC 60268-22: 2020)

General Information

• Status: Published
• Publication Date: 05-Nov-2020
• ICS: 33.160.01 - Audio, video and audiovisual systems in general
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Drafting Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 06-Nov-2020
• Completion Date: 06-Nov-2020
• Ref Project: SIST EN IEC 60268-22:2021 - Sound system equipment - Part 22: Electrical and mechanical measurements on transducers (IEC 60268-22:2020)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60268-22:2021
01-julij-2021
Oprema zvokovnega sistema - 22. del: Električne in mehanske meritve na
pretvornikih (IEC 60268-22: 2020)
Sound system equipment - Part 22: Electrical and mechanical measurements on
transducers (IEC 60268-22:2020)
Elektroakustische Geräte - Teil 22: Elektrische und mechanische Messungen an
Wandlern (IEC 60268-22:2020)
Équipements pour systèmes électroacoustiques - Partie 22: Mesurages électriques et
mécaniques sur transducteurs (IEC 60268-22:2020)
Ta slovenski standard je istoveten z: EN IEC 60268-22:2020
ICS:
33.160.30 Avdio sistemi Audio systems
SIST EN IEC 60268-22:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60268-22:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 60268-22:2021


EUROPEAN STANDARD EN IEC 60268-22

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2020
ICS 33.160.01

English Version
Sound system equipment - Part 22: Electrical and mechanical
measurements on transducers
(IEC 60268-22:2020)
Équipements pour systèmes électroacoustiques - Partie 22: Elektroakustische Geräte - Teil 22: Elektrische und
Mesurages électriques et mécaniques sur transducteurs mechanische Messungen an Wandlern
(IEC 60268-22:2020) (IEC 60268-22:2020)
This European Standard was approved by CENELEC on 2020-10-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60268-22:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60268-22:2021
EN IEC 60268-22:2020 (E)
European foreword
The text of document 100/3311/CDV, future edition 1 of IEC 60268-22, prepared by IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 60268-22:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-07-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60268-22:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60068-2 (series) NOTE Harmonized as EN IEC 60068-2 (series)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60268-22:2021
EN IEC 60268-22:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec
...