EN 61162-3:2008/A2:2014

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument network

This part of IEC 61162 is based upon the NMEA 2000 standard. The NMEA 2000 standard contains the requirements for the minimum implementation of a serial-data communications network to interconnect marine electronic equipment onboard vessels. Equipment designed to this standard will have the ability to share data, including commands and status, with other compatible equipment over a single signalling channel. Data messages are transmitted as a series of data frames, each with robust error check confirmed frame delivery and guaranteed latency times. As the actual data content of a data frame is at best 50 % of the transmitted bits, this standard is primarily intended to support relatively brief data messages, which may be periodic, transmitted as needed, or on-demand by use of query commands. Typical data includes discrete parameters such as position latitude and longitude, GPS status values, steering commands to autopilots, finite parameter lists such as waypoints, and moderately sized blocks of data such as electronic chart database updates. This standard is not necessarily intended to support high-bandwidth applications such as radar, electronic chart or other video data, or other intensive database or file transfer applications. This standard defines all of the pertinent layers of the International Standards Organisation Open Systems Interconnect (ISO/OSI) model, from the application layer to the physical layer, necessary to implement the required IEC 61162-3 network functionality. This standard defines data formats, network protocol, and the minimum physical layer necessary for devices to interface. SOLAS applications shall employ redundant designs (for instance dual networks, redundant network interface circuits) to reduce the impact of single point failures. The NMEA 2000 standard provides the fundamental tools and methods to support redundant equipment, buses and messaging. Specific shipboard installation designs are beyond the scope of this standard, however some guidance is given in Annex A.

Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Digitale Schnittstellen - Teil 3: Serielles Dateninstrumentenetz

Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces numériques - Partie 3: Réseau par liaison de données série d'instruments

Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Digitalni vmesniki - 3. del: Instrumentno omrežje s serijskimi podatki - Dopolnilo A2 (IEC 61162-3:2008/A2:2014)

Ta del IEC 61162 je osnovan na standardu NMEA 2000. Standard NMEA 2000 vsebuje zahteve za minimalno vgraditev komunikacijskega omrežja z serijskimi podatki, za medsebojno povezavo pomorske elektronske opreme na plovilih. Oprema, načrtovana s tem standardom, bo imela možnost delitve podatkov, vključno z ukazi in statusom, z drugo združljivo opremo skozi enojni signalni kanal. Podatkovna sporočila so oddajana kot serija podatkovnih okvirjev, vsak z časom dobave okvirja z potrjenim robustnim pregledom za napake in časom zagotovljene zakasnitve. Ker je dejanska vsebnost podatkovnega okvirja v najboljšem primeru 50 % oddajanih bitov, je ta standard primarno namenjen za podporo relativno kratkim podatkovnim sporočilom, ki so lahko periodična, oddajana po potrebi ali za uporabo na zahtevo poizvedbe ukazov. Običajno podatki vsebujejo diskretne parametre, kot so položaj geografske širine in dolžine, GPS statusne vrednosti, ukaze krmiljenja do avtopilotov, sezname končnih parametrov kot so smerne točke, in zmerno velike podatkovne bloke kot so nadgradnje baz elektronskih grafov. Ta standard ni nujno namenjen za podporo uporab z visoko pasovno širino, kot so radar, elektronski grafi ali drugi video podatki ali druge intenzivne uporabe baz ali prenosa podatkov. Ta standard določa vse bistvene plasti modela odprtih sistemov medsebojne povezave mednarodnih standardizacijskih ustanov (ISO/OSI), iz plasti uporabe do fizične plasti, potrebne za vpeljavo zahtevanih IEC 61162-3 omrežnih funkcionalnosti. Ta standard določa podatkovne formate, omrežni protokol in minimalno fizično plast potrebno za priključitev naprav. SOLAS uporabe naj uporabijo redundantne načrte (na primer dvojna omrežja, redundantna omrežna vmesna vezja) za zmanjševanje posledic lokalnih odpovedi. Standard NMEA 2000 zagotavlja osnovna temeljna orodja in metode za podporo redundantne opreme, vmesnikov in obveščanja. Določeni načrti vgradnje na ladjah so zunaj področja uporabe tega standarda, čeprav je nekaj napotkov podanih v Dodatku A.

General Information

• Status: Published
• Publication Date: 25-Sep-2014
• Withdrawal Date: 24-Aug-2017
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: CLC/SR 80 - Maritime navigation and radiocommunication equipment and systems
• Drafting Committee: IEC/TC 80 - IEC_TC_80
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 26-Sep-2014
• Completion Date: 26-Sep-2014
• Ref Project: SIST EN 61162-3:2008/A2:2014 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces -- Part 3: Serial data instrument network

Relations

• Amends: EN 61162-3:2008 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument network
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2014
Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Digitalni
vmesniki - 3. del: Instrumentno omrežje s serijskimi podatki - Dopolnilo A2 (IEC
61162-3:2008/A2:2014)
Maritime navigation and radiocommunication equipment and systems - Digital interfaces
-- Part 3: Serial data instrument network
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt -
Digitale Schnittstellen - Teil 3: Serielles Dateninstrumentenetz
Matériels et systèmes de navigation et de radiocommunication maritimes - Interfaces
numériques - Partie 3: Réseau par liaison de données série d'instruments
Ta slovenski standard je istoveten z: EN 61162-3:2008/A2:2014
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61162-3:2008/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2014
ICS 47.020.70
English Version
Maritime navigation and radiocommunication equipment and
systems - Digital interfaces - Part 3: Serial data instrument
network
(IEC 61162-3:2008/A2:2014)
Matériels et systèmes de navigation et de Navigations- und Funkkommunikationsgeräte und -systeme
radiocommunication maritimes - Interfaces numériques - für die Seeschifffahrt - Digitale Schnittstellen -
Partie 3: Réseau par liaison de données série d'instruments Teil 3: Serielles Dateninstrumentenetz
(CEI 61162-3:2008/A2:2014) (IEC 61162-3:2008/A2:2014)
This amendment A2 modifies the European Standard EN 61162-3:2008; it was approved by CENELEC on 2014-08-25. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61162-3:2008/A2:2014 E

Foreword
The text of document 80/714/CDV, future IEC 61162-3:2008/A2, prepared by IEC/TC 80 "Maritime
navigation and radiocommunication equipment and systems" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61162-3:2008/A2:2014.
The following dates are fixed:
(dop) 2015-05-25
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-08-25
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61162-3:2008/A2:2014 was approved by CENELEC as a
European Standard without any modification.

- 3 - EN 61162-3:2008/A2:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Replace the existing reference to NMEA 2000, Main document, Version 1.200: October 2004 by:
Publication Year Title EN/HD Year
NMEA 2000, 2013 Serial-Data Networking of Marine - -
Main Document, Electronic Devices
Version 1.210
Replace the existing reference to NMEA 2000, Appendix A, Version 1.200: October 2004 by:
Publication Year Title EN/HD Year
NMEA 2000, 2013 Serial-Data Networking of Marine - -
Appendix A, Electronic Devices - Application Layer
Version 2.000 (Parameter Group Definitions)

Replace the existing reference to NMEA 2000, Appendix B, Version 1.300: May 2009 by:
Publication Year Title EN/HD Year
NMEA 2000, 2013 Serial-Data Networking of Marine - -
Appendix B, Electronic Devices - Database
Version 2.000
Replace the existing reference to NMEA 2000, Appendix D, Version 1.200: October 2004 by:
Publication Year Title EN/HD Year
NMEA 2000, 2013 Serial-Data Networking of Marine - -
Appendix D, Electronic Devices - Application Notes
Version 1.210
IEC 61162-3 ®
Edition 1.0 2014-07
INTERNATIONAL
STANDARD
AMENDMENT 2
Maritime navigation and radiocommunication equipment and systems –

Digital interfaces –
Part 3: Serial data instrument network

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 47.020.70 ISBN 978-2-8322-1689-7

– 2 – IEC 61162-3:2008/AMD2:2014
 IEC 2014
FOREWORD
This amendment has been prepared by IEC technical committee 80: Maritime navigation and
radiocommunication equipment and systems.
The text of this amendment is based on the following documents:
CDV Report on voting
80/714/CDV 80/734/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

_____________
INTRODUCTION to Amendment 2
The amendment updates the normative references for NMEA 2000 Main Document, NMEA
2000 Appendix A and NMEA 2000 Appendix D to a later version.
The amendment further updates the normative reference for NMEA 2000 Appendix B to a later
version which includes the following new parameter groups:
126983 – Alert
126984 – Alert response
129041 – AIS Aids to Navigation (AtoN) report
130316 – Temperature- extended range
and the following revised parameter groups:
126992 – System time
128259 – Speed, water referenced
128267 – Water depth
129285 – Navigation – Route/WP information
129033 – Time and date
129038 – AIS Class A position report

IEC 61162-3:2008/AMD2:2014 – 3 –
 IEC 2014
129039 – AIS Class B position report
129040 – AIS Class B extended position report
129550 – GNSS differential correction receiver
129793 – AIS UTC and date report
129794 – AIS Class A static and voyage related data
129796 – AIS acknowledge
129798 – AIS SAR aircraft position report
129800 – AIS UTC/date inquiry
129801 – AIS addressed safety related message
129802 – AIS safety related broadcast message
129803 – AIS interrogation
129804 – AIS assignment mode command
129805 – AIS data link management message
129806 – AIS channel management
129807 – AIS group assignment
129809 – AIS Class B “CS” static data report, Part A
129810 – AIS Class B “CS” static data report, Part B
The amendment further adds a new informative Annex B which shows the relationships
between IEC 61162-1 sentences and IEC 61162-3 parameter group numbers.

1 Scope
Add, at the end of the scope, the following new paragraph:
Relationships between IEC 61162-1 sentences and IEC 61162-3 parameter group numbers
are given in Annex B.
2 Normative references
Replace the existing reference, NMEA 2000 Main document, Version 1.200: October 2004, by
the following:
NMEA 2000 Main document, Version 1.210: January 2013, Serial-Data Networking Of
Marine Electronic Devices
Replace the existing reference, NMEA 2000, Appendix A, Version 1.200: October 2004, by the
following:
NMEA 2000, Appendix A, Version 2.000: January 2013, Serial-Data Networking Of Marine
Electronic Devices – Application Layer (Parameter Group Definitions)
_____________
Available from National Marine Electronics Association (USA), www.nmea.org.

– 4 – IEC 61162-3:2008/AMD2:2014
 IEC 2014
Replace the existing reference, as updated by Amendment 1:2010, NMEA 2000, Appendix B,
Version 1.300: May 2009, by the following:
NMEA 2000, Appendix B, Version 2.000: January 2013, Serial-Data Networking Of Marine
Electronic Devices – Data Base
Replace the existing reference, NMEA 2000, Appendix D, Version 1.200: October 2004, by
the following:
NMEA 2000, Appendix D, Version 1.210: January 2013, Serial-Data Networking Of Marine
Electronic Devices – Application Notes

Add, after Annex A, the following new Annex B:

IEC 61162-3:2008/AMD2:2014 – 5 –
 IEC 2014
Annex B
(informative)
Relationship between IEC 61162-1 sentences
and IEC 61162-3 parameter group numbers
Table B.1 and Table B.2 give equivalents for transferring data over IEC 61162-1 interfaces
and IEC 61162-3 interfaces.
Table B.1 – Conversion from IEC 61162-1 to IEC 61162-3
IEC 61162-1 sentence IEC 61162-3 PGN
AAM Waypoint arrival alarm
129284 Navigation data
ABK AIS addressed and binary
129796 AIS acknowledge
broadcast acknowledgement
ABM
AIS addressed binary and
129801 AIS addressed safety related
safety related message
message
129795 AIS addressed binary message
ACA AIS regional channel
129806 AIS channel management
assignment message
ACK Acknowledge alarm
126984 Alert response
ACS AIS channel management
129806 AIS channel management
information source
AIR AIS interrogation request
129083 AIS interrogation
AKD Acknowledge detail alarm
126984 Alert response
condition
126983 Alert
ALA Set detail alarm condition
126983 Alert
ALR Set alarm state
APB Heading/Track Controller
127237 Heading/track control
(Autopilot) Sentence B
129283 Cross track error
129284 Navigation data
BBM AIS broadcast binary
129797 AIS binary broadcast message
message
129802 AIS safety related broadcast
message
BEC Bearing and distance to 129284 Navigation data
waypoint – Dead reckoning
BOD Bearing – Origin to 129284 Navigation data
destination
BWC Bearing and distance to 129284 Navigation data
waypoint – Great circle
BWR Bearing and distance to 129284 Navigation data
waypoint – Rhumb line
BWW Bearing – Waypoint to 129302 Bearing and distance between two
Waypoint marks
129284 Navigation data
CUR Water current layer 130577 Direction data
DBT Depth below transducer 128267 Water depth
DPT Depth 128267 Water depth
DSC Digital selective calling 129808 DSC call information
information
DSE Expanded digital selective 129808 DSC call information
calling
DTM Datum reference 129044 Datum
129045 User datum setting
– 6 – IEC 61162-3:2008/AMD2:2014
 IEC 2014
IEC 61162-1 sentence IEC 61162-3 PGN
FSI Frequency set status or 129799 Radio frequency/mode/power
command
GBS GNSS satellite fault detection 129545 GNSS RAIM output
GFA GNSS fix accuracy and 129540 GNSS satellites in view
Integrity
GGA Global positioning system 129025 Position, rapid update
(GPS) fix data
129029 GNSS position data
GLL Geographic position – 129025 Position, rapid update
Latitude/longitude
129029 GNSS position data
GNS GNSS fix data 129025 Position, rapid update
129029 GNSS position data
GSA GNSS DOP and active 129029 GNSS position data
satellites
129539 GNSS DOPs
GST GNSS pseudorange error 129547 GNSS pseudorange error statistics
statistics
GSV GNSS satellites in view 129540 GNSS satellites in view
HDG Heading, deviation and 127250 Vessel heading
variation
127258 Magnetic variation
HDT Heading true 127250 Vessel heading
HSC Heading steering command 127237 Heading track control
HTC Heading/track control 127237 Heading track control
command
HTD Heading/track control data 127237 Heading track control
MSK MSK receiver interface 129550 GNSS differential correction
command receiver interface
MSS MSK receiver signal 129551 GNSS differential correction
receiver signal
MTW Water temperature 130316 Temperature extended range
MWD Wind direction and speed 130306 Wind data
MWV Wind speed and angle 130306 Wind data
OSD Own ship data 127250 Vessel heading
128259 Speed, water referenced
129026 COG, SOG rapid update
129291 Set and drift, rapid update
...