prEN IEC 62037-3:2024
(Main)Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors
Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors
Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 3: Messung der passiven Intermodulation in koaxialen Steckverbindern
Dispositifs RF et à micro-ondes passifs, mesure du niveau d'intermodulation - Partie 3: Mesure de l'intermodulation passive dans les connecteurs coaxiaux
Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve intermodulacijskega nivoja - 3. del: Meritve pasivne intermodulacije v koaksialnih konektorjih
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2024
Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve
intermodulacijskega nivoja - 3. del: Meritve pasivne intermodulacije v koaksialnih
konektorjih
Passive RF and microwave devices, intermodulation level measurement - Part 3:
Measurement of passive intermodulation in coaxial connectors
Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 3:
Messung der passiven Intermodulation in koaxialen Steckverbindern
Dispositifs RF et à micro-ondes passifs, mesure du niveau d'intermodulation - Partie 3:
Mesure de l'intermodulation passive dans les connecteurs coaxiaux
Ta slovenski standard je istoveten z: prEN IEC 62037-3:2024
ICS:
33.040.20 Prenosni sistem Transmission systems
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
46/987/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62037-3 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-03-08 2024-05-31
SUPERSEDES DOCUMENTS:
46/949/CD, 46/983/CC
IEC TC 46 : CABLES, WIRES, WAVEGUIDES, RF CONNECTORS, RF AND MICROWAVE PASSIVE COMPONENTS AND ACCESSORIES
SECRETARIAT: SECRETARY:
United States of America Mr David Hess
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 46A,SC 46F
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses
to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC
clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive
intermodulation in coaxial connectors
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 62037-3 © IEC 2024 2 46/987/CDV
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
46/987/CDV 3 IEC CDV 62037-3 © IEC 2024
1 CONTENTS
2 FOREWORD . 4
3 1 Scope . 6
4 2 Normative references . 6
5 3 Terms, definitions and abbreviated terms . 6
6 3.1 Terms and definitions . 6
7 3.2 Abbreviated terms . 6
8 4 Test method . 7
9 4.1 Samples for testing . 7
10 4.2 Connection of unit . 7
11 4.3 Set-up 1 – Fixed frequency test considerations . 7
12 4.4 Set-up 2 considerations . 7
13 4.5 Impacts . 7
14 5 Report . 9
15 Annex A (normative) Calculating equivalent impact energy . 10
16 Annex B (normative) Calculating impact energy for different connector types . 11
18 Figure 1 – Impact test illustration . 8
20 Table 1 – Impact information for some popular connectors. 8
21 Table A.1 – Estimated mass of various diameter steel balls . 10
22 Table B.1 – Impact energy calculation for RF connector type . 11
IEC CDV 62037-3 © IEC 2024 4 46/987/CDV
25 INTERNATIONAL ELECTROTECHNICAL COMMISSION
26 ____________
28 PASSIVE RF AND MICROWAVE DEVICES,
29 INTERMODULATION LEVEL MEASUREMENT –
31 Part 3: Measurement of passive intermodulation in coaxial connectors
33 FOREWORD
34 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
35 national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co -
36 operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition
37 to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly
38 Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is
39 entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
40 this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
41 participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)
42 in accordance with conditions determined by agreement between the two organizations.
43 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
44 consensus of opinion on the relevant subjects since each technical committee has representation from all interested
45 IEC National Committees.
46 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
47 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
48 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation
49 by any end user.
50 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
51 transparently to the maximum extent possible in their national and regional publications. Any divergence between any
52 IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
53 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
54 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
55 carried out by independent certification bodies.
56 6) All users should ensure that they have the latest edition of this publication.
57 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members
58 of its technical committees and IEC National Committees for any personal injury, property damage or other damage
59 of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of
60 the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
61 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
62 indispensable for the correct application of this publication.
63 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
64 rights. IEC shall not be held responsible for identifying any or all such patent rights.
65 IEC 62037-3 has been prepared by IEC technical committee 46: Cables, wires, waveguides, RF
66 connectors, RF and microwave passive components and accessories. It is an International
67 Standard.
68 This second edition cancels and replaces the first edition published in 2012. This edition constitutes
69 a technical revision.
70 This edition includes the following significant technical changes with respect to the previous edition:
71 a) impact method changed to utilize a steel ball rather than a brass rod;
72 b) impact energy required to test each connector type added;
73 c) method added to calculate impact energy for connector types not listed in the document.
46/987/CDV 5 IEC CDV 62037-3 © IEC 2024
74 The text of this International Standard is based on the following documents:
Draft Report on voting
46/836/FDIS 46/857/RVD
76 Full information on the voting for its approval can be found in the report on voting indicated in the
77 above table.
78 The language used for the development of this Internationa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.