33.040.20 - Transmission systems
Transmission systems
Ubertragungssysteme
Systemes de transmission
Prenosni sistem
General Information
- Corrigendum1 pageEnglish language
sale 10% off- e-Library read for1 day
IEC 60728-101:2016 is applicable to any cable network (including individual receiving systems) distributing only digital channels having in the forward path a coaxial cable output and primarily intended for television and sound signals operating between about 30 MHz and 3 000 MHz. This standard specifies the basic methods of measurement of the operational characteristics of a cable network having coaxial cable outputs in order to assess the performance of these systems and their performance limi...view more
- Standard113 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 60728-101:2016 is applicable to any cable network (including individual receiving systems) distributing only digital channels having in the forward path a coaxial cable output and primarily intended for television and sound signals operating between about 30 MHz and 3 000 MHz. This standard specifies the basic methods of measurement of the operational characteristics of a cable network having coaxial cable outputs in order to assess the performance of these systems and their performance limi...view more
- Standard240 pagesEnglish and French language
sale 15% off
IEC 62037-5:2013(E) defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by filters, typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for filters for use in low intermodulation (low IM) applications.
- Standard15 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62037-6:2013(E) defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by antennas, typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for antennas for use in low intermodulation (low IM) applications.
- Standard15 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62037-2:2012(E) defines a procedure to measure levels of passive intermodulation generated by a coaxial cable assembly. This test method is applicable to jumper cables, i.e. cable assemblies intended to provide interface flexibility between rigid devices.
- Standard10 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62037-5:2013 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by filters, typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for filters for use in low intermodulation (low IM) applications.
- Standard24 pagesEnglish and French language
sale 15% off
IEC 62037-6:2013 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by antennas, typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for antennas for use in low intermodulation (low IM) applications.
- Standard26 pagesEnglish and French language
sale 15% off
IEC 62037-2:2012 defines a procedure to measure levels of passive intermodulation generated by a coaxial cable assembly. This test method is applicable to jumper cables, i.e. cable assemblies intended to provide interface flexibility between rigid devices.
- Standard13 pagesEnglish and French language
sale 15% off
IEC 62037-3:2012(E) is part of the IEC 62037 series, and defines the impact test on coaxial connectors to evaluate their robustness against weak connections and particles inside the connector as independently as possible from the effects of cable PIM (passive intermodulation).
- Standard11 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62037-4:2012(E) is part of the IEC 62037 series, and defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by coaxial cables. Two dynamic test methods and a static test method are defined.
- Standard13 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62037-1:2012(E) is applicable to the general requirements and measuring methods for intermodulation (IM) level measurement of passive RF and microwave components, which can be caused by the presence of two or more transmitting signals. This first edition of IEC 62037-1 replaces IEC 62037, published in 1999. It constitutes a technical revision. This standard is part of the IEC 62037 series which addresses the measurement of PIM, but does not cover the long term reliability of a product with r...view more
- Standard19 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard19 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62037-4:2012 is part of the IEC 62037 series, and defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by coaxial cables. Two dynamic test methods and a static test method are defined.
- Standard19 pagesEnglish and French language
sale 15% off
IEC 62037-3:2012 is part of the IEC 62037 series, and defines the impact test on coaxial connectors to evaluate their robustness against weak connections and particles inside the connector as independently as possible from the effects of cable PIM (passive intermodulation).
- Standard16 pagesEnglish and French language
sale 15% off
IEC 62037-1:2012 is applicable to the general requirements and measuring methods for intermodulation (IM) level measurement of passive RF and microwave components, which can be caused by the presence of two or more transmitting signals. This first edition of IEC 62037-1 replaces IEC 62037, published in 1999. It constitutes a technical revision. This standard is part of the IEC 62037 series which addresses the measurement of PIM, but does not cover the long term reliability of a product with refe...view more
- Standard33 pagesEnglish and French language
sale 15% off
IEC 62153-4-14:2012(E) is applicable to the in-field test method that is used to determine the coupling attenuation for installed links and channels used in analogue and digital communication systems. This method is used to determine the attenuation of disturbing power to signal power in a cabling system, and vice versa. This determines the influence from cabling on the EMC performance of a system. This standard is part of the IEC 62153 series titled Metallic communication cable test methods.
- Standard16 pagesEnglish language
sale 15% off
This EMC standard specifies limits and methods of measurement for emissions originating from within traditional telecommunication networks and the immunity of those networks, including their in-premises extensions by references to harmonised product standards in combination with good engineering practice, when installed and operated as intended. This standard covers the frequency range 9 kHz to 400 GHz. To date, it specifies limits and methods of measurement for conducted and radiated disturbanc...view more
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
This EMC standard specifies requirements for emissions originating from within wire-line telecommunication networks using telephone wires and the immunity of those networks, including their in-premises extensions by references to harmonised EMC product standards and other standards with EMC requirements in combination with good engineering practice, when installed and operated as intended. This standard covers the frequency range 9 kHz to 400 GHz. The assessment of a network needs to be performe...view more
- Standard11 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 61935-2:2010 provides methods to ensure compatibility of balanced cords to be used in cabling according to ISO/IEC 11801 and provides test methods and associated requirements to demonstrate the performance and reliability of these balanced cords during their operational lifetime. This International Standard may also be used for providing test methods for assessing the behaviour of other balanced cords. This third edition cancels and replaces the second edition published in 2005. It differs f...view more
- Standard31 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 61935-2:2010 provides methods to ensure compatibility of balanced cords to be used in cabling according to ISO/IEC 11801 and provides test methods and associated requirements to demonstrate the performance and reliability of these balanced cords during their operational lifetime. This International Standard may also be used for providing test methods for assessing the behaviour of other balanced cords. This third edition cancels and replaces the second edition published in 2005. It differs f...view more
- Standard55 pagesEnglish and French language
sale 15% off