EN 61300-2-33:2012

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures

IEC 61300-2-33:2012(E) is a part of a series that evaluates the assembly and reassembly of a fibre optic mechanical splice, a fibre management system or a closure for a specified number of times. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: the inclusion of fibre management system and ancillary passive and active components as well as cable management system for the incoming and outgoing optical cables. Keywords: fibre optic mechanical splice, fibre management system or a closure

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-33: Prüfungen - Montage und Demontage von mechanischen LWL-Spleißen, Fasermanagementsystemen und Muffen

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d’essais et de mesures - Partie 2-33: Essais - Montage et démontage des épissures mécaniques de fibres optiques, des systèmes de gestion des fibres et des boîtiers

La CEI 61300-2-33:2012 est partie d'une série qui permet d'évaluer l'aptitude au montage et au remontage d'une épissure mécanique de fibres optiques, d'un système de gestion des fibres ou d'un boîtier pour un nombre de fois spécifié. Cette troisième édition annule et remplace la deuxième édition publiée en 2006. Cette édition constitue une révision technique. La présente édition contient les changements techniques significatifs suivants par rapport à l'édition antérieure: ajout des systèmes de gestion des fibres et des composants actifs et passifs auxiliaires ainsi que des systèmes de gestion des câbles pour les câbles optiques entrants et sortants. Mots clés: épissure mécanique de fibres optiques, système de gestion des fibres ou d'un boîtier

Optični spojni elementi in pasivne komponente - Osnovni preskuševalni in merilni postopki - 2-33. del: Preskušanje - Sestavljanje in razstavljanje optomehanskih spojnic, konzol za upravljanje optičnih sistemov in ohišij (IEC 61300-2-33:2012)

Ta del standarda IEC 61300 ocenjuje določeno število sestavljanj in razstavljanj optomehanskih spojnic, konzol za upravljanje optičnih sistemov ali ohišij. Preskuševalni postopki simulirajo spodnje pogoje, ki se lahko pojavijo med življenjsko dobo komponente: – zmožnost ponovne namestitve optomehanske spojnice po razstavljanju; – zmožnost ponovnega vnosa konzol za upravljanje optičnih sistemov in ohišij z dostopom do optičnih vlaken in optičnih komponent ter ponovnim konfiguriranjem brez motenj prenosa v sosednjih vezjih optičnih vlaken; – preverjanje zmogljivosti tesnjenja po pogostem odpiranju in zapiranju odprtin.

General Information

• Status: Published
• Publication Date: 04-Oct-2012
• Withdrawal Date: 27-Aug-2013
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 05-Oct-2012
• Completion Date: 05-Oct-2012
• Ref Project: SIST EN 61300-2-33:2012 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures (IEC 61300-2-33:2012)

Relations

• Replaces: EN 61300-2-33:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic closures
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-33:2012
01-december-2012
1DGRPHãþD
SIST EN 61300-2-33:2007
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXãHYDOQLLQPHULOQL
SRVWRSNLGHO3UHVNXãDQMH6HVWDYOMDQMHLQUD]VWDYOMDQMHRSWRPHKDQVNLK
VSRMQLFNRQ]RO]DXSUDYOMDQMHRSWLþQLKVLVWHPRYLQRKLãLM,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic
mechanical splices, fibre management systems and closures (IEC 61300-2-33:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-33: Prüfungen - Montage und Demontage von mechanischen
LWL-Spleißen, Fasermanagementsystemen und Muffen (IEC 61300-2-33:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d’essais et de mesures - Partie 2-33: Essais - Montage et démontage des
épissures mécaniques de fibres optiques, des systèmes de gestion des fibres et des
boîtiers (CEI 61300-2-33:2012)
Ta slovenski standard je istoveten z: EN 61300-2-33:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-33:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-33:2012

---------------------- Page: 2 ----------------------

SIST EN 61300-2-33:2012

EUROPEAN STANDARD
EN 61300-2-33

NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-33:2007

English version

Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-33: Tests -
Assembly and disassembly of fibre optic mechanical splices, fibre
management systems and closures
(IEC 61300-2-33:2012)

Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d’essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-33: Essais - Teil 2-33: Prüfungen -
Montage et démontage des épissures Montage und Demontage von
mécaniques de fibres optiques, des mechanischen LWL-Spleißen,
systèmes de gestion des fibres et des Fasermanagementsystemen und Muffen
boîtiers (IEC 61300-2-33:2012)
(CEI 61300-2-33:2012)


This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-33:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-33:2012
EN 61300-2-33:2012 - 2 -

Foreword
The text of document 86B/3330/CDV, future edition 3 of IEC 61300-2-33, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-33:2012.

The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2013-08-28

standards conflicting with the
document have to be withdrawn

This document supersedes EN 61300-2-33:2007.
EN 61300-2-33:2012 includes the following significant technical changes with respect to EN 61300-2-
33:2007: the inclusion of fibre management system and ancillary passive and a
...