SIST EN 61300-2-33:2012

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures (IEC 61300-2-33:2012)

IEC 61300-2-33:2012(E) is a part of a series that evaluates the assembly and reassembly of a fibre optic mechanical splice, a fibre management system or a closure for a specified number of times. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: the inclusion of fibre management system and ancillary passive and active components as well as cable management system for the incoming and outgoing optical cables. Keywords: fibre optic mechanical splice, fibre management system or a closure

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-33: Prüfungen - Montage und Demontage von mechanischen LWL-Spleißen, Fasermanagementsystemen und Muffen (IEC 61300-2-33:2012)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d’essais et de mesures - Partie 2-33: Essais - Montage et démontage des épissures mécaniques de fibres optiques, des systèmes de gestion des fibres et des boîtiers (CEI 61300-2-33:2012)

La CEI 61300-2-33:2012 est partie d'une série qui permet d'évaluer l'aptitude au montage et au remontage d'une épissure mécanique de fibres optiques, d'un système de gestion des fibres ou d'un boîtier pour un nombre de fois spécifié. Cette troisième édition annule et remplace la deuxième édition publiée en 2006. Cette édition constitue une révision technique. La présente édition contient les changements techniques significatifs suivants par rapport à l'édition antérieure: ajout des systèmes de gestion des fibres et des composants actifs et passifs auxiliaires ainsi que des systèmes de gestion des câbles pour les câbles optiques entrants et sortants.
Mots clés: épissure mécanique de fibres optiques, système de gestion des fibres ou d'un boîtier

Optični spojni elementi in pasivne komponente - Osnovni preskuševalni in merilni postopki - 2-33. del: Preskušanje - Sestavljanje in razstavljanje optomehanskih spojnic, konzol za upravljanje optičnih sistemov in ohišij (IEC 61300-2-33:2012)

Ta del standarda IEC 61300 ocenjuje določeno število sestavljanj in razstavljanj optomehanskih spojnic, konzol za upravljanje optičnih sistemov ali ohišij. Preskuševalni postopki simulirajo spodnje pogoje, ki se lahko pojavijo med življenjsko dobo komponente: – zmožnost ponovne namestitve optomehanske spojnice po razstavljanju; – zmožnost ponovnega vnosa konzol za upravljanje optičnih sistemov in ohišij z dostopom do optičnih vlaken in optičnih komponent ter ponovnim konfiguriranjem brez motenj prenosa v sosednjih vezjih optičnih vlaken; – preverjanje zmogljivosti tesnjenja po pogostem odpiranju in zapiranju odprtin.

General Information

• Status: Published
• Publication Date: 25-Oct-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 16-Oct-2012
• Due Date: 21-Dec-2012
• Completion Date: 26-Oct-2012
• Ref Project: EN 61300-2-33:2012 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures

Relations

• Replaces: SIST EN 61300-2-33:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-33: Tests - Assembly and disassembly of fibre optic closures
• Effective Date: 01-Dec-2012
• Revised: kSIST FprEN IEC 61300-2-33:2025 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and protective housings
• Effective Date: 28-Sep-2021
• Revised: SIST EN 61300-2-33:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-33: Tests - Assembly and disassembly of fibre optic closures
• Effective Date: 03-Sep-2013

Overview

EN 61300-2-33:2012 (CLC adoption of IEC 61300-2-33:2012) is part of the IEC 61300 series for fibre optic interconnecting devices and passive components. This edition specifies basic test and measurement procedures for the assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures. It evaluates re-assembly, re-entry and sealing performance over a specified number of cycles, simulating conditions encountered during a component’s service life. The 2012 revision extends scope to include fibre management systems, ancillary passive/active components and cable management for incoming/outgoing optical cables.

Key Topics

• Purpose: Assess ability to re-install mechanical splices, access and reconfigure fibre management systems without affecting adjacent circuits, and verify enclosure sealing after repeated openings.
• Test procedures: Three principal procedures are defined:
  • Procedure A - re-installation of an optical mechanical splice after disassembly.
  • Procedure B - optical stability during product reconfiguration (re-entry).
  • Procedure C - sealing performance after frequent opening and closing of enclosures.
• Test execution: Assembly/disassembly must follow the manufacturer’s instructions using specified tools and consumables; measurements and examinations are performed as required by the relevant performance standard.
• Ageing and recovery: Temperature ageing cycles and recovery periods are incorporated between assembly cycles (ageing details and cycle counts are provided in the standard’s tables).
• Severity and environment: The standard defines how many assembly/disassembly cycles to apply for different operating environments and references criteria for test severity.
• Terms: Key definitions include closure, fibre management system, re-entry and mechanical splice.

Applications

EN 61300-2-33:2012 is intended for practical use by:

• Manufacturers of mechanical fibre splices, closures and fibre management systems - to validate product robustness to repeated servicing.
• Test laboratories - to perform standardized assembly/disassembly and sealing tests for product qualification.
• Network designers and installation contractors - to select components that allow safe re-entry and reliable reconfiguration without disturbing live circuits.
• Procurement/specification authors - to reference objective test procedures and acceptance criteria in contracts for FTTH, telecom, datacentre and outdoor network hardware. Practical scenarios include field maintenance of splices, repeated access to closures during network upgrades, and validation of sealing after multiple interventions.

Related Standards

• IEC/EN 61300-2-22 (Change of temperature)
• IEC/EN 61300-3-28 (Transient loss measurements)
• IEC 61753-1 (Performance standards guidance) These referenced documents provide complementary environmental and measurement methods used alongside EN 61300-2-33:2012.

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2012
1DGRPHãþD
SIST EN 61300-2-33:2007
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXãHYDOQLLQPHULOQL
SRVWRSNLGHO3UHVNXãDQMH6HVWDYOMDQMHLQUD]VWDYOMDQMHRSWRPHKDQVNLK
VSRMQLFNRQ]RO]DXSUDYOMDQMHRSWLþQLKVLVWHPRYLQRKLãLM,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic
mechanical splices, fibre management systems and closures (IEC 61300-2-33:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-33: Prüfungen - Montage und Demontage von mechanischen
LWL-Spleißen, Fasermanagementsystemen und Muffen (IEC 61300-2-33:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d’essais et de mesures - Partie 2-33: Essais - Montage et démontage des
épissures mécaniques de fibres optiques, des systèmes de gestion des fibres et des
boîtiers (CEI 61300-2-33:2012)
Ta slovenski standard je istoveten z: EN 61300-2-33:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61300-2-33
NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-33:2007

English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-33: Tests -
Assembly and disassembly of fibre optic mechanical splices, fibre
management systems and closures
(IEC 61300-2-33:2012)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d’essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-33: Essais - Teil 2-33: Prüfungen -
Montage et démontage des épissures Montage und Demontage von
mécaniques de fibres optiques, des mechanischen LWL-Spleißen,
systèmes de gestion des fibres et des Fasermanagementsystemen und Muffen
boîtiers (IEC 61300-2-33:2012)
(CEI 61300-2-33:2012)
This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-33:2012 E
Foreword
The text of document 86B/3330/CDV, future edition 3 of IEC 61300-2-33, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-33:2012.

The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2013-08-28

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61300-2-33:2007.
33:2007: the inclusion of fibre management system and ancillary passive and active components as well
as cable management system for the incoming and outgoing optical cables.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61300-2-33:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300-1 NOTE  Harmonized as EN 61300-1.

- 3 - EN 61300-2-33:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
IEC 61753-1 - Fibre optic interconnecting devices and EN 61753-1 -
passive components performance standard -
Part 1: General and guidance for performance
standards
IEC 61300-2-33 ®
Edition 3.0 2012-07
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures –
Part 2-33: Tests – Assembly and disassembly of fibre optic mechanical splices,

fibre management systems and closures

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
L
ICS 33.180.20 ISBN 978-2-83220-200-5

– 2 – 61300-2-33 © IEC:2012(E)
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General description . 6
5 Procedure . 6
5.1 Preparation of the specimen . 6
5.2 Test procedures . 6
5.2.1 Procedure A: Re-installation of an optical mechanical splice after
disassembly . 6
5.2.2 Procedure B: Optical stability during product reconfiguration . 6
5.2.3 Procedure C: Sealing performance after frequent opening and closing
of the enclosures . 7
5.2.4 Ageing procedure . 7
5.3 Severity . 9
6 Details to be specified . 9
Annex A (informative) Installation and intervention procedure for closure – optical
stability . 10
Bibliography . 11

Table 1 – Ageing procedure between two cycles of assembly and disassembly of fibre
optic mechanical splices and closures . 8
Table 2 – Number of assembly/disassembly cycles for different operating environments . 9

61300-2-33 © IEC:2012(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-33: Tests – Assembly and disassembly of fibre optic
mechanical splices, fibre management systems and closures

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-2-33 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive co
...