EN 61158-6-10:2012

Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements

IEC 61158-6-10:2010(E) specifies the protocol of the Type 10 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). It defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-10:2010, and the externally visible behavior associated with their transfer. This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. The main changes with respect to the previous edition are: - corrections; - improvements; - optimization of the synchronization; - optimization of the startup time from power down.

Industrielle Kommunikationsnetze - Feldbusse - Teil 6-10: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 10-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-10: Spécification des protocoles des couches d'application - Eléments de type 10

Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 6-10. del: Specifikacija protokola na aplikacijskem nivoju - Elementi tipa 10 (IEC 61158-6-10:2010)

Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«. Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 10. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno vedenje, ki ga zagotavlja aplikacijski nivo procesnih vodil tipa 10 v zvezi z a) abstraktno sintakso, ki opredeljuje podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo, b) prenosno sintakso, ki opredeljuje podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo, c) strojem stanj aplikacijskega konteksta, ki opredeljuje vedenje aplikacijskega opravila, vidnega med aplikacijskimi osebki, ki komunicirajo, in d) stroji stanj aplikacijskega razmerja, ki opredeljujejo komunikacijsko vedenje med aplikacijskimi osebki, ki komunicirajo. Namen tega standarda je opredeliti protokol za a) določitev žične predstavitve primitivov opravil iz standarda IEC 61158-5-10 in b) določitev zunanje vidnega vedenja, povezanega z njihovim prenosom.

General Information

• Status: Withdrawn
• Publication Date: 21-Jun-2012
• Withdrawal Date: 27-Mar-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Sep-2017
• Completion Date: 23-Sep-2017
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-6-10:2012 - Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements (IEC 61158-6-10:2010)

Relations

• Replaces: EN 61158-6-10:2008 - Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements
• Effective Date: 29-Jan-2023
• Replaced By: EN 61158-6-10:2014 - Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-6-10:2008
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 6-10. del:
Specifikacija protokola na aplikacijskem nivoju - Elementi tipa 10 (IEC 61158-6-
10:2010)
Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer
protocol specification - Type 10 elements (IEC 61158-6-10:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-10: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 10-Elemente (IEC 61158-6-10:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-10:
Spécification des protocoles des couches d'application - Eléments de type 10 (CEI
61158-6-10:2010)
Ta slovenski standard je istoveten z: EN 61158-6-10:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-6-10
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-6-10:2008

English version
Industrial communication networks -
Fieldbus specifications -
Part 6-10: Application layer protocol specification -
Type 10 elements
(IEC 61158-6-10:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 6-10: Spécification des protocoles Teil 6-10: Protokollspezifikation des
des couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 10 Typ 10-Elemente
(CEI 61158-6-10:2010) (IEC 61158-6-10:2010)

This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-6-10:2012 E
Foreword
The text of document 65C/607/FDIS, future edition 2 of IEC 61158-6-10, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-10:2012.

The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-6-10:2008.
10:2008:
– corrections;
– improvements;
– optimization of the synchronization;
– optimization of the startup time from power down.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-6-10:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC/TR 61158-1 NOTE  Harmonized as CLC/TR 61158-1.
IEC 61158-6-3:2010 NOTE  Harmonized as EN 61158-6-3:2012.

- 3 - EN 61158-6-10:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60559 - Binary floating-point arithmetic for HD 592 S1 -
microprocessor systems
IEC 61158-5-10 2010 Industrial communication networks - Fieldbus EN 61158-5-10 2012
specifications -
Part 5-10: Application layer service definition -
Type 10 elements
IEC 61784-3-3 - Industrial communication networks - Profiles - EN 61784-3-3 -
Part 3-3: Functional safety fieldbuses -
Additional specifications for CPF 3

ISO/IEC 646 1991 Information technology - ISO 7-bit coded - -
character set for information interchange

ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of basic
notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure

ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services

ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
IEEE 802.1D 2004 IEEE Standard for Local and Metropolitan - -
Area Networks - Media Access Control (MAC)
Bridges
IEEE 802 2001 IEEE standard for local and metropolitan area - -
networks: overview and architecture

IEEE 802.1AB 2005 IEEE Standard for Local and metropolitan - -
area networks Station and Media Access
Control Connectivity Discovery

IEEE 802.1Q 2005 IEEE Standard for Local and Metropolitan - -
Area Networks - Virtual Bridged Local Area
Networks
Publication Year Title EN/HD Year

IEEE 802.3 2005 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks -
Part 3: Carrier Sense Multiple Access with
Collision Detection (CSMA/CD) Access
Method and Physical Layer Specifications

IEEE 802.15.1 2005 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements. -
Part 15.1: Wireless medium access control
(MAC) and physical layer (PHY) specifications
for wireless personal area networks (WPANs)

IEEE 802.11 1999 IEEE Standard for Information technology-- -
Telecommunications and information
exchange between systems-Local and
metropolitan area networks-Specific
requirements -
Part 11: Wireless LAN Medium Access
Control (MAC) and Physical Layer (PHY)
Specifications
IETF RFC 768 - User Datagram Protocol - -

IETF RFC 791 - Internet Protocol - DARPA Internet Program - -
Protocol Specification
IETF RFC 826 - Ethernet Address Resolution Protocol - -

IETF RFC 3621 - Power Ethernet MIB - -

IETF RFC 792 - Internet Control Message Protocol - -

IETF RFC 1112 - Host Extensions for IP Multicasting - -

IETF RFC 3490 - Internationalizing Domain Names in - -
Applications (IDNA)
IETF RFC 1034 - Domain names - concepts and facilities - -

IETF RFC 2131 - Dynamic Host Configuration Protocol - -

IETF RFC 2674 - Definitions of Managed Objects for Bridges - -
with Traffic Classes, Multicast Filtering and
Virtual LAN Extensions
IETF RFC 2737 - Entity MIB (Version 2) - -

IETF RFC 2863 - The Interfaces Group MIB - -

IETF RFC 2365 - Administratively Scoped IP Multicast - -

IETF RFC 3330 - Special-Use IPv4 Addresses - -

IETF RFC 4836 - Definitions of managed objects for IEEE 802.3 - -
medium attachment units (MAUs)

IETF RFC 1518 - An architecture for IP address allocation with - -
CIDR
- 5 - EN 61158-6-10:2012
Publication Year Title EN/HD Year

IETF RFC 1519 - Classless Inter-Domain Routing (CIDR): an - -
address assignment and aggregation strategy

IETF RFC 2474 - Definition of the Differentiated Services Field - -
(DS Field) in the IPv4 and IPv6 Headers

IETF RFC 3418 - Management Information Base (MIB) for the - -
Simple Network Management Protocol
(SNMP)
IETF RFC 2132 - DHCP Options and BOOTP Vendor - -
Extensions
The Open Group - CAE Specification DCE11: Remote Procedure - -
C706 Call
IEC 61158-6-10 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Fieldbus specifications –
Part 6-10: Application layer protocol specification – Type 10 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XU
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-128-1
– 2 – 61158-6-10 © IEC:2010(E)
CONTENTS
FOREWORD.20
INTRODUCTION.22
1 Scope.24
1.1 General .24
1.2 Specifications.24
1.3 Conformance.25
2 Normative references .25
3 Terms, definitions, abbreviations, symbols and conventions .27
3.1 Referenced terms and definitions .27
3.2 Additional terms and definitions for distributed automation .28
3.3 Additional terms and definitions for decentralized periphery .30
3.4 Additional abbreviations and symbols for distributed automation .37
3.5 Additional abbreviations and symbols for decentralized periphery .38
3.6 Additional abbreviations and symbols for media redundancy .39
3.7 Conventions .39
3.8 Conventions used in state machines .46
4 Application layer protocol specification for common protocols.49
4.1 FAL syntax description .49
4.2 Transfer syntax .52
4.3 Discovery and basic configuration .64
4.4 Precision time control.96
4.5 Media redundancy.162
4.6 Real-time cyclic.187
4.7 Real-time acyclic .206
4.8 Remote procedure call .219
4.9 Link layer discovery.236
4.10 MAC bridges .244
4.11 Virtual bridges .259
4.12 IP suite.269
4.13 Domain name system .273
4.14 Dynamic host configuration .273
4.15 Simple network management.273
4.16 Common
...