prEN IEC 61169-23:2023
(Main)Radio-frequency connectors - Part 23: Pin and socket connector for use with 3.5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in)
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3.5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in)
Hochfrequenz-Steckverbinder – Teil 23: Stift- und Buchsenstecker zur Verwendung mit starren 3,5-mm-Präzisionskoaxialleitungen mit einem Innendurchmesser des Außenleiters von 3,5 mm (0,1378 in)
Connecteurs pour fréquences radioélectriques - Partie 23: Connecteur à broche et connecteur embase pour lignes rigides coaxiales de précision de 3,5 mm avec diamètre intérieur du conducteur extérieur de 3,5 mm (0,1378 in)
Radiofrekvenčni konektorji - 23. del: Moški in ženski konektor za uporabo pri togih preciznih koaksialnih vodih z notranjim premerom zunanjega vodnika 3,5 mm (0,1378 in)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2024
Radiofrekvenčni konektorji - 23. del: Moški in ženski konektor za uporabo pri togih
preciznih koaksialnih vodih z notranjim premerom zunanjega vodnika 3,5 mm
(0,1378 in)
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3.5 mm
rigid precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in)
Connecteurs pour fréquences radioélectriques - Partie 23: Connecteur à broche et
connecteur embase pour lignes rigides coaxiales de précision de 3,5 mm avec diamètre
intérieur du conducteur extérieur de 3,5 mm (0,1378 in)
Ta slovenski standard je istoveten z: prEN IEC 61169-23:2023
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
46F/655/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61169-23 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-12-22 2024-03-15
SUPERSEDES DOCUMENTS:
46F/640/CD, 46F/649/CC
IEC SC 46F : RF AND MICROWAVE PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
United States of America Mr John Morelli
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3.5 mm rigid
precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in)
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Incorporates changes from CC 46F649eCC
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 61169-23 © IEC 2023 2 46F/655/CDV
1 CONTENTS
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 Mating face and gauge information . 6
8 4.1 Dimensions –High performance connectors –Grade1 . 6
9 4.1.1 Connector with pin- centre contact . 6
10 4.1.2 Connector with socket-centre contact . 7
11 4.2 Gauge pins for socket-centre contact . 8
12 4.3 Dimensions – standard test connectors – Grade 0 . 9
13 4.3.1 Connector with pin-centre contact . 9
14 4.3.2 Connector with socket-centre contact . 10
15 5 Quality assessment procedures . 11
16 5.1 General . 11
17 5.2 Ratings and characteristics (see Clause 5 of IEC 61169-1:2013) . 11
18 5.3 Test schedule and inspection requirements . 13
19 5.3.1 Acceptance tests . 13
20 5.3.2 Periodic tests . 14
21 5.3.3 Procedures for the quality conformance . 15
22 6 Instructions for preparation of detail specifications . 16
23 6.1 General . 16
24 6.2 Identification of the component . 16
25 6.3 Performances . 16
26 6.4 Marking, ordering information and related matters . 16
27 6.5 Selection of tests, test conditions and severities . 16
28 6.6 Blank detail specification pro-forma for type 3,5 series connector . 17
29 Bibliography . 22
31 Figure 1 – Connector with pin-centre contact (for dimensions, see Table 1) . 6
32 Figure 2 – Connector with socket-centre contact (for dimensions, see Table 2) . 7
33 Figure 3 – Gauge pin for socket-centre contact (for dimensions, see Table 3). 8
34 Figure 4 – Connector with pin-centre contact (for dimensions, see Table 4) . 9
35 Figure 5 – Connector with socket-centre contact (for dimensions, see Table 5) . 10
37 Table 1 – Dimensions of connector with pin-centre contact . 6
38 Table 2 – Dimensions of connector with socket-centre contact . 7
39 Table 3 – Dimensions of gauge pin for socket-centre contact . 8
40 Table 4 – Dimensions of connector with pin-centre contact . 9
41 Table 5 – Dimensions of connector with socket-centre contact . 10
42 Table 6 – Preferred climatic categories . 11
43 Table 7 – Rating and characteristics . 12
44 Table 8 – Acceptance tests . 14
45 Table 9 – Periodic tests . 14
46F/655/CDV 3 IEC CDV 61169-23 © IEC 2023
48 INTERNATIONAL ELECTROTECHNICAL COMMISSION
49 ____________
51 RADIO-FREQUENCY CONNECTORS –
53 Part 23: Pin and socket connector for use with 3,5 mm rigid precision
54 coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
56 FOREWORD
57 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
58 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
59 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
60 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
61 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
62 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
63 in the subject dealt with may participate in this preparatory work. International, governmental and non -
64 governmental organizations liaising with the IEC also participate in this preparation. IEC collabo rates closely
65 with the International Organization for Standardization (ISO) in accordance with conditions determined by
66 agreement between the two organizations.
67 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
68 consensus of opinion on the relevant subjects since each technical committee has representation from all
69 interested IEC National Committees.
70 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
71 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
72 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
73 misinterpretation by any end user.
74 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
75 transparently to the maximum extent possible in their national and regional publications. Any divergence
76 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
77 the latter.
78 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
79 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
80 services carried out by independent certification bodies.
81 6) All users should ensure that they have the latest edition of this publication.
82 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
83 members of its technical committees and IEC National Committees for any personal injury, property damage or
84 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
85 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
86 Publications.
87 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
88 indispensable for the correct application of this publication.
89 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
90 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
91 International Standard IEC 61169-XX has been prepared by subcommittee 46F: RF and
92 microwave passive components, of IEC technical committee 46: Cables, wires, waveguides,
93 RF connectors, RF and microwave passive components and accessories.
94 The text of this standard is based on the following documents:
FDIS Report on voting
46F/XX/FDIS 46F/XX/RVD
96 Full information on the voting for the approval of this International Standard can be found in
97 the report on voting indicated in the above table.
98 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC CDV 61169-23 © IEC 2023 4 46F/655/CDV
99 A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors,
100 can be found on the IEC website.
101 The committee has decided that the contents of this document will remain unchanged until the
102 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
103 the specific document. At this date, the document will be
104 • reconfirmed,
105 • withdrawn,
106 • replaced by a revised edition, or
107 • amended.
109 A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
46F/655/CDV 5 IEC CDV 61169-23 © IEC 2023
113 RADIO-FREQUENCY CONNECTORS –
115 Part 23: Pin and socket connector for use with 3,5 mm rigid precision
116 coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
120 1 Scope
121 This part of IEC 61169, which is a sectional specification (SS), provides information and rules
122 for the preparation of detail specifications (DS) for pin and socket connector for use with 3,5
123 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) .
124 This document prescribes mating face dimensions for high performance connectors – grade 1,
125 dimensional details of standard test connectors-grade 0, gauging information and tests
126 selected from IEC 61169-1, applicable to all detail specifications relating to series 3,5mm RF
127 connectors.
128 This document indicates recommended performance characteristics to be considered when
129 writing a detail specification and it covers test schedules and inspection requirements for
130 assessment levels M and H.
131 These connectors are constructed so as to affix on the 50Ω, 3,5 mm rigid precision coaxial
132 line described in IEC 457-5,and to provide low reflection
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.