EN 60793-2-10:2004

Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

Applicable to optical fibre types A1a, A1b, and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Three types of requirements apply to these fibres: -general requirements, as defined in EN 60793-2; -specific requirements common to the category A1 multimode fibres covered in this standard and which are given in clause 3; -particular requirements applicabe to individual fibre types or specific applications, which are defined in the normative family specification annexes.

Lichtwellenleiter - Teil 2-10: Produktspezifikationen - Rahmenspezifikation für Mehrmodenfasern der Kategorie A1

Fibres optiques - Partie 2-10: Spécifications de produits - Spécification intermédiaire pour les fibres multimodales de catégorie A1

Applicables aux fibres optiques de type A1a, A1b et A1d. Ces fibres sont utilisées ou peuvent être intégrées dans des équipements destinés à la transmission de l'information et dans des câbles à fibres optiques. Trois types d'exigences s'appliquent à ces fibres: les exigences générales, qui sont définies dans la EN 60793-2; des exigences spécifiques communes aux fibres multimodales de catégorie A1, couvertes par la présente norme et qui sont données à l'Article 3; des exigences particulières applicables à des types particuliers de fibres ou à des applications spécifiques, qui sont définies dans les spécifications de familles figurant en annexe.

Optična vlakna – 2-10. del: Specifikacije izdelka – Področna specifikacija za večrodna vlakna kategorije A1 (IEC 60793-2-10:2004)

General Information

• Status: Withdrawn
• Publication Date: 08-Dec-2004
• Withdrawal Date: 30-Sep-2007
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Parallel Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2010
• Completion Date: 01-Sep-2010
• Ref Project: SIST EN 60793-2-10:2006 - Optical fibres -- Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres

Relations

• Replaces: EN 60793-2-10:2002 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• Effective Date: 29-Jan-2023
• Replaced By: EN 60793-2-10:2007 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60793-2-10:2006

STANDARD
oct 2006
Optična vlakna – 2-10. del: Specifikacije izdelka – Področna specifikacija za
večrodna vlakna kategorije A1 (IEC 60793-2-10:2004)
Optical fibres – Part 2-10: Product specifications – Sectional specification for
category A1 multimode fibres (IEC 60793-2-10:2004)
ICS 33.180.10 Referenčna številka
SIST EN 60793-2-10:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60793-2-10
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2004

ICS 33.180.10 Supersedes EN 60793-2-10:2002


English version


Optical fibres
Part 2-10: Product specifications -
Sectional specification for category A1 multimode fibres
(IEC 60793-2-10:2004)


Fibres optiques Lichtwellenleiter
Partie 2-10: Spécifications de produits - Teil 2-10: Produktspezifikationen -
Spécification intermédiaire pour les fibres Rahmenspezifikation
multimodales de catégorie A1 für Mehrmodenfasern der Kategorie A1
(CEI 60793-2-10:2004) (IEC 60793-2-10:2004)






This European Standard was approved by CENELEC on 2004-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60793-2-10:2004 E

---------------------- Page: 2 ----------------------

EN 60793-2-10:2004 - 2 -
Foreword
The text of document 86A/966/FDIS, future edition 2 of IEC 60793-2-10, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60793-2-10 on 2004-10-01.
This European Standard supersedes EN 60793-2-10:2002.
This new edition adds environmental test requirements and A1a.2 (50/125 µm) fibre to support
10 Gb/s applications.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60793-2-10:2004 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60793-2-10:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60793-1-1 2002 Optical fibres EN 60793-1-1 2003
Part 1-1: Measurement methods and test
procedures - General and guidance

IEC 60793-1-20 2001 Part 1-20: Measurement methods and EN 60793-1-20 2002
test procedures - Fibre geometry

IEC 60793-1-21 2001 Part 1-21: Measurement methods and EN 60793-1-21 2002
test procedures - Coating geometry

IEC 60793-1-22 2001 Part 1-22: Measurement methods and EN 60793-1-22 2002
test procedures - Length measurement

IEC 60793-1-30 2001 Part 1-30: Measurement methods and EN 60793-1-30 2002
test procedures - Fibre proof test

IEC 60793-1-31 2001 Part 1-31: Measurement methods and EN 60793-1-31 2002
test procedures - Tensile
...