iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60966-3-2:1999

(Main)

Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)

Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)

Relates to the subfamily of coaxial cables and connector assemblies operating int he frequency range of GSM (0,8 GHz - 1 GHz). Gives subfamily requirements and severities to be applied. Should be used together with EN 60966-3 and EN 600966-1.

Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 3-2: Bauartspezifikation für halbflexible konfektionierte Koaxialkabel für GSM-Anwendungen (0,8 GHz - 1 GHz)

Ensemble de cordons caoxiaux et de cordons pour fréquences radioélectriques - Partie 3-2: Spécification particulière pour cordons coaxiaux semi-flexibles pour applications GSM (0,8 GHz - 1 GHz)

Concerne la sous-famille de connecteurs et de câbles assemblés fonctionnant dans les bandes de fréquence du GSM (0,8 GHz - 1 GHz). Donne les exigences et les sévérités à appliquer à la sous-famille. Convient d'utiliser cette spécification particulière conjointement avec la EN 60966-3 et la EN 60096-1.

Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-2:1996)

General Information

Status
Withdrawn
Publication Date
14-Feb-1999
Withdrawal Date
31-Dec-1999
ICS
33.120.10 - Coaxial cables. Waveguides
Technical Committee
CLC/TC 46X - Communication cables
Drafting Committee
CLC/SC 46XA - Coaxial cables
Parallel Committee
IEC/SC 46A - IEC_SC_46A
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Oct-2006
Completion Date
01-Oct-2006
Ref Project
SIST EN 60966-3-2:2001 - Radio frequency and coaxial cable assemblies -- Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)

Relations

Replaced By
EN 60966-3-2:2003 - Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
Effective Date
28-Jan-2023

Buy Standard

EN 60966-3-2:2001EN 60966-3-2:2001
PreviousNext
Standard
EN 60966-3-2:2001
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60966-3-2:2001
01-februar-2001
Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for
semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-
2:1996)
Radio frequency and coaxial cable assemblies -- Part 3-2: Detail specification for semi-
flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
Konfektionierte Koaxial- und Hochfrequenzkabel -- Teil 3-2: Bauartspezifikation für
halbflexible konfektionierte Koaxialkabel für GSM-Anwendungen (0,8 GHz - 1 GHz)
Ensemble de cordons caoxiaux et de cordons pour fréquences radioélectriques -- Partie
3-2: Spécification particulière pour cordons coaxiaux semi-flexibles pour applications
GSM (0,8 GHz - 1 GHz)
Ta slovenski standard je istoveten z: EN 60966-3-2:1999
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60966-3-2:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60966-3-1:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
SIST EN IEC 60966-3-1:2024

IEC 60966-3-1:2023 is a blank detail specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification can be prepared by the insertion of data into the pro forma by a national organization, a manufacturer, or a user.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-3:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
SIST EN IEC 60966-3:2024

IEC 60966-3:2023 is a sectional specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-flexible cable assemblies, quality assessment, delivery and storage, etc. This part of IEC 60966 applies to semi-flexible cable assemblies composed of semi-flexible coaxial cables and coaxial connectors. Semi-flexible cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields. NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62153-4-16:2021/AC:2023-11(Corrigendum)
Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
SIST EN IEC 62153-4-16:2021/AC:2024
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-3-4:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-4: Detail specification for semi-flexible cable assemblies (Jumper) - Frequency range up to 6 GHz, Type 50-141 semi-flexible coaxial cable
SIST EN IEC 60966-3-4:2023

This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as type 7-16 (IEC 61169-4), type 4,1-9,5 (IEC 61169-11), type S7-16 (IEC 61169-53) ，type 4,3-10 (IEC 61169-54). It gives subfamily detail requirements and severities which shall be applied. These cable assemblies are mainly used in the field of mobile communication base station antenna system, terrestrial microwave communication and radar systems. The operating frequency is up to 6000 MHz. The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants. Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-3-3:2023(Main)
Radio frequency and coaxial cable assemblies - Part 3-3: Detail specification for semi-flexible cable assemblies (jumper) - Frequency range up to 18 GHz, Type 50-141 semi-flexible coaxial cable
SIST EN IEC 60966-3-3:2023

This part of IEC 60966 is a detail specification that relates to semi-flexible cable assemblies composed of type 50-141 semi-flexible coaxial cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-8-4) and connectors such as, type SMA(IEC 61169-15), type N (IEC 61169-16). It gives subfamily detail requirements and severities which shall be applied. These cable assemblies are mainly used in the field of microwave and wireless equipment or other signal transmission equipment or units. The operating frequency is up to 18000 MHz. The qualification will be conducted in accordance with IEC 60966-3. Once one variant obtain qualification approval, the other variant with same cable and connection type can obtain qualification approval by conducting tests whose results might depend on the variants. Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in IEC 60966-3 and described in the CM(capability manual). Unless otherwise specified in the CM, only lot-by-lot tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in IEC 60966-3 and described in the CM.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61726:2022(Main)
Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
SIST EN IEC 61726:2022

This standard describes the measurement of screening attenuation by the reverberation chamber measurement method, also called mode stirred chamber method. This standard is applicable to screening attenuation measurements of cable assemblies, cables, connectors, and passive microwave components, such as waveguides, phase shifters, diplexers/multiplexers, power dividers/combiners and etc. Modern electronic equipments have shown a demand for methods for testing screening attenuation performance of microwave components over their whole frequency range. Convenient measurement methods have existed for lower frequencies and components of regular shape. These measurement methods are described in IEC 62153 series standards. For much higher frequencies and for components of irregular shape, the reverberation chamber method should be used. Theoretically, the reverberation chamber method has no upper limit of the measurement frequency, but it is limited by the quality and sensitivity of the measurement system, and the lower limit of the measurement frequency is restricted by the size of the reverberation chamber.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62037-2:2021(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial cable assemblies
SIST EN IEC 62037-2:2022

This part of IEC 62037 defines a procedure to measure levels of passive intermodulation generated by a coaxial cable assembly. This test method is applicable to jumper cables, i.e. cable assemblies intended to provide interface flexibility between rigid devices. It is also used to evaluate cable assemblies that are subjected to motion in operation.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62153-4-16:2021(Main)
Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
SIST EN IEC 62153-4-16:2021

This part of IEC 62153 specifies a method to extrapolate the test results of transfer impedance to higher frequencies and the test results of screening attenuation to lower frequencies when measured with the triaxial set-up in accordance with IEC 62153-4-3, IEC 62153‑4‑4 [1]1 and IEC 62153-4-15. This method is applicable for homogenous screens, i.e. screens having a transfer impedance directly proportional to length. The transfer impedance can have any frequency behaviour, i.e. it could have a behaviour where it does not increase with 20 dB per decade as observed for screens made of a foil and a braid.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62153-4-5:2021(Main)
Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method
SIST EN IEC 62153-4-5:2021

The absorbing clamp method is suitable to determine the screening- or the coupling attenuation of metallic communication cables in the frequency range of 30 MHz to 2400 MHz, depending on the performance of the clamp. It is an alternative method to the the triaxial method of IEC 62153-4-4 or IEC 62153-4-9. Due to the undefined outer circuit of this absorbing clamp method, the test results obtained at different places and laboratories could vary by at least ± 6dB.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62153-4-15:2021(Main)
Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell
SIST EN IEC 62153-4-15:2021

IEC 62153-4-15:2021 is available as IEC 62153-4-15:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62153-4-15:2021 specifies the procedures for measuring with triaxial cell the transfer impedance, screening attenuation or the coupling attenuation of connectors, cable assemblies and components, for example accessories for analogue and digital transmission systems, and equipment for communication networks and cabling. This second edition cancels and replaces the first edition published in 2015.This edition includes the following significant technical changes with respect to the previous edition: a) measurement of coupling attenuation of balanced connectors, assemblies and components with balun and balunless added; b) application of a test adapter was added; c) application of a moveable shorting plane; d) application of the triaxial "absorber" cell; e) correction of test results in the case that the receiver input impedance R is higher than the characteristic impedance of the outer circuit Z2.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day