prEN IEC 60317-0-3:2023

Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-3: Allgemeine Anforderungen - Lackisolierte Runddrähte aus Aluminium

Spécifications pour types particuliers de fils de bobinage - Partie 0-3: Exigences générales - Fil de section circulaire en aluminium émaillé

Specifikacije za posebne vrste navijalnih žic - 0-3. del: Splošne zahteve - Emajliran okrogel aluminijev vodnik

General Information

• Status: Not Published
• Publication Date: 16-Mar-2025
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Current Stage: 4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
• Start Date: 17-Nov-2023
• Completion Date: 17-Nov-2023
• Ref Project: oSIST prEN IEC 60317-0-3:2023 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire

Relations

• Revises: EN 60317-0-3:2008 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 14-Feb-2023
• Revises: EN 60317-0-3:2008/A1:2013 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 14-Feb-2023
• Revises: EN 60317-0-3:2008/A2:2019 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 14-Feb-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60317-0-3:2023
01-oktober-2023
Specifikacije za posebne vrste navijalnih žic - 0-3. del: Splošne zahteve - Emajliran
okrogel aluminijev vodnik
Specifications for particular types of winding wires - Part 0-3: General requirements -
Enamelled round aluminium wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-3:
Allgemeine Anforderungen - Lackisolierte Runddrähte aus Aluminiumdraht
Spécifications pour types particuliers de fils de bobinage - Partie 0-3: Exigences
générales - Fil de section circulaire en aluminium émaillé
Ta slovenski standard je istoveten z: prEN IEC 60317-0-3:2023
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN IEC 60317-0-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60317-0-3:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60317-0-3:2023
55/2003/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 60317-0-3 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-08-25 2023-11-17
SUPERSEDES DOCUMENTS:
55/1942/RR

IEC TC 55 : WINDING WIRES
SECRETARIAT: SECRETARY:
United States of America Mr Mike Leibowitz
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 2,TC 14
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Specifications for particular types of winding wires - Part 0-3: General requirements -
Enamelled round aluminium wire

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:
This new 4th edition proposes simple amendments to the springiness and cut-through requirements in
accordance with Decision 2022-08 in 55/1936/DL, and with 55/1912A/INF.

Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60317-0-3:2023
IEC CDV 60317-0-3/Ed4 © IEC 2023 – 2 – 55/2003/CDV
1 CONTENTS
2
3 FOREWORD . 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms, definitions, general notes, and appearance . 7
8 3.1 Definitions . 7
9 3.2 General notes . 8
10 3.2.1 Methods of test . 8
11 3.2.2 Winding wire . 9
12 3.3 Appearance . 9
13 4 Dimensions . 9
14 4.1 Conductor diameter .
...