EN 61753-031-3:2009

Fibre optic interconnecting devices and passive components performance standard - Part 031-3: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category U - Uncontrolled environment

IEC 61753-031-3:2009(E) contains the minimum initial tests and measurement requirements and severities which a non-wavelength selective branching device (NWBD) should satisfy in order to be categorized as meeting the requirements of Category U (uncontrolled environment) as defined in Annex A of IEC 61753-1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 031-3: Nicht mit Steckverbindern versehene wellenlängenunabhängige Einmoden-1xN- und 2xN-Verzweiger für die Kategorie U - Unkontrollierte Umgebung

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 031-3: Dispositifs de couplage non-connectorisés monomodes 1xN et 2xN ne dépendant pas de la longueur d'onde pour catégorie U - Environnement non contrôlé

L'IEC 61753-031-3:2009 contient les exigences de mesure et d'essai initiales minimales et les sévérités auxquelles il convient qu'un dispositif de couplage indépendant de la longueur d'onde (NWBD) satisfasse afin d'être classé dans la catégorie U (environnement non contrôlé), selon la définition de l'Annexe A de la CEI 61753-1. Mots clés: couplage indépendant de la longueur d'onde (NWBD), catégorie U (environnement non contrôlé)

Izvedbeni standard za povezovalne naprave in pasivne komponente optičnih vlaken - 031-3. del: Enorodni 1xN in 2xN nevalovnodolžinski selektivni optični sklopniki brez konektorjev za kategorijo U - Nenadzorovano okolje (IEC 61753-031-3:2009)

General Information

• Status: Withdrawn
• Publication Date: 29-Apr-2009
• Withdrawal Date: 31-Mar-2012
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Jan-2016
• Completion Date: 20-Jan-2016
• Ref Project: SIST EN 61753-031-3:2009 - Fibre optic interconnecting devices and passive components performance standard - Part 031-3: Non-connectorised single-mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment (IEC 61753-031-3:2009)

Relations

• Replaces: EN 61753-2-3:2001 - Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-connectorised single mode 1xN and 2xN non-wavelength-selective branching devices for Category U - Uncontrolled environment
• Effective Date: 29-Jan-2023
• Replaced By: EN 61753-031-3:2015 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2009
,]YHGEHQLVWDQGDUG]DSRYH]RYDOQHQDSUDYHLQSDVLYQHNRPSRQHQWHRSWLþQLK
YODNHQGHO(QRURGQL[1LQ[1QHYDORYQRGROåLQVNLVHOHNWLYQLRSWLþQL
VNORSQLNLEUH]NRQHNWRUMHY]DNDWHJRULMR81HQDG]RURYDQRRNROMH,(&

Fibre optic interconnecting devices and passive components performance standard -
Part 031-3: Non-connectorised single-mode 1xN and 2xN non-wavelength-selective
branching devices for Category U - Uncontrolled environment (IEC 61753-031-3:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
031-3: Nicht mit Steckverbindern versehene wellenlängenunabhängige Einmoden-1xN-
und 2xN-Verzweiger für die Kategorie U - Unkontrollierte Umgebung (IEC 61753-031-
3:2009)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 031-3: Dispositifs de couplage non-connectorisés
monomodes 1xN et 2xN ne dépendant pas de la longueur d'onde pour catégorie U -
Environnement non contrôlé (CEI 61753-031-3:2009)
Ta slovenski standard je istoveten z: EN 61753-031-3:2009
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-031-3
NORME EUROPÉENNE
April 2009
EUROPÄISCHE NORM
ICS 33.180.10
English version
Fibre optic interconnecting devices
and passive components performance standard -
Part 031-3: Non-connectorized single-mode 1xN and 2xN
non-wavelength-selective branching devices (NWBD) for Category U -
Uncontrolled environment
(IEC 61753-031-3:2009)
Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 031-3: Dispositifs de couplage Betriebsverhalten -
non-connectorisés monomodes 1xN Teil 031-3: Nicht mit Steckverbindern
et 2xN ne dépendant pas de la longueur versehene wellenlängenunabhängige
d'onde pour catégorie U - Einmoden-1xN- und 2xN-Verzweiger
Environnement non contrôlé für die Kategorie U -
(CEI 61753-031-3:2009) Unkontrollierte Umgebung
(IEC 61753-031-3:2009)
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-031-3:2009 E

Foreword
The text of document 86B/2789/FDIS, future edition 1 of IEC 61753-031-3, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-031-3 on 2009-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-031-3:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60875-1 NOTE  Harmonized as EN 60875-1:2001 (not modified).
IEC 61753-1 NOTE  Harmonized as EN 61753-1:2007 (not modified).
__________
- 3 - EN 61753-031-3:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 2008
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

1) 2)
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

1) 2)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

1)
IEC 61300-2-5 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion
1) 2)
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 1997
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
1) 2)
IEC 61300-2-12 - Fibre optic interconnecting devices and EN 61300-2-12 2005
passive components - Basic test and
measurement procedures -
Part 2-12: Tests - Impact
1) 2)
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 2006
passive components - Basic test and + corr. November 2006
measurement procedures -
Part 2-14: Tests - Optical power handling and
damage threshold characterization

1) 2)
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 2003
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
1) 2)
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 2005
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

1) 2)
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

1) 2)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

1) 2)
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 2005
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
1) 2)
IEC 61300-2-46 - Fibre optic interconnecting devices and EN 61300-2-46 2006
passive components - Basic test and
measurement procedures -
Part 2-46: Tests - Damp heat cyclic

1) 2)
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 2009
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device
1) 2)
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
1) 2)
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 2009
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
1)
IEC 61300-3-7 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components

1) 2)
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 2001
passive components - Basic test and + corr. March 2002
measurement procedures -
Part 3-20: Examinations and measurements -
Directivity of fibre optic branching devices

1) 2)
IEC 61753-2-1 - Fibre optic interconnecting devices and EN 61753-2-1 2000
passive components performance standard -
Part 2-1: Fibre optic connectors terminated on
single-mode fibre for category U -
Uncontrolled environment
IEC 61753-031-3 ®
Edition 1.0 2009-02
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components performance
standard –
Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-
selective branching devices (NWBD) for Category U – Uncontrolled environment

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
Q
ICS 33.180.10 ISBN 2-8318-1029-0
– 2 – 61753-031-3 © IEC:2009(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Test.6
4 Test report.7
5 Performance requirements .7
5.1 Dimensions .7
5.2 Sample size .7
5.3 Test details and requirements .7
Annex A (informative) Examples of attenuation requirements of 1 × N and 2 × N
branching devices.15
Annex B (normative) Sample size .16
Bibliography.17

Table 1 – Test details and requirements .8
Table A.1 – Attenuation and uniformity requirements of balanced bidirectional
branching devices having the most common port configurations for class FBT.15
Table A.2 – Attenuation and uniformity requirements of balanced bidirectional
branching devices having the most common port configurations for class PLC.15
Table A.3 – Attenuation requirements of 1 × 2 and 2 × 2 unbalanced branching devices
having the most common port configurations .15
Table B.1 – Sample size for each test.16

61753-031-3 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE
COMPONENTS PERFORMANCE STANDARD –

Part 031-3: Non-connectorized single-mode 1×N and 2×N
non-wavelength-selective branching devices (NWBD) for Category U –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for internati
...