EN 61158-6-10:2014
(Main)Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements
Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements
IEC 61158-6-10:2014 defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-10, and define the externally visible behavior associated with their transfer. This standard specifies the protocol of the Type 10 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. The main changes are: - Change from MRP integration to MRP reference; - Integration of dynamic frame packing; - Integration of peer to peer fragmentation; - Integration of fast forwarding; - Integration of shared RT_CLASS_3 ARs; - Integration of vendor specific blocks for the connect; - Integration of generic POF diagnosis; - Integration of autoconfiguration; - Integration of seamless media redundancy MRPD; - Integration of the System redundancy basic functionality; - Integration of the Configure in run basic functionality; - Integration of multiple interface support; - Integration of port statistic for error tracking; - Integration of controller to controller communication basic functionality; - Optimization of RT_CLASS_3 startup and forwarding; - Optimization of isochronuos startup; - Optimization of the startup time from power down; - Removal of MRRT; - Removal of distributed automation; - Update of the LLDP-EXT-MIB.
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-10: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 10-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-10: Spécification du protocole de la couche application - Eléments de type 10
L'IEC 61158-6-10:2014 décrit le protocole mis en place pour définir la représentation filaire des primitives de service définies dans la CEI 61158-5-10 et définir le comportement visible de l'extérieur associé à leur transfert. La présente norme spécifie le protocole de la couche application de bus de terrain de Type 10, en conformité avec le modèle de référence de base OSI (ISO/CEI 7498-1) et la structure de la couche application OSI (ISO/CEI 9545). Cette troisième édition annule et remplace la deuxième édition parue en 2010. Elle constitue une révision technique. Les principales modifications sont: - Changement de l'intégration MRP en référence MRP; - Intégration de la combinaison de trame dynamique; - Intégration de la fragmentation entre pairs; - Intégration du transfert rapide; - Intégration d'AR de RT_CLASS_3 partagées; - Intégration de blocs spécifiques au vendeur pour la connexion; - Intégration du diagnostic de POF générique; - Intégration de l'autoconfiguration; - Intégration du MRPD de redondance de support sans coupure; - Intégration de la fonction de base de redondance du Système; - Intégration de la fonction de base de Configuration en cours d'exécution; - Intégration de la prise en charge d'interfaces multiples; - Intégration de statistique de port pour le suivi des erreurs; - Intégration de la fonction de base de communication entre contrôleurs; - Optimisation du démarrage et du transfert de RT_CLASS_3; - Optimisation du démarrage isochrone; - Optimisation du temps de démarrage depuis une mise hors tension; - Suppression de MRRT; - Suppression de l'automatisation distribuée; - Mise à jour de LLDP-EXT-MIB.
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-10. del: Specifikacija protokola na aplikacijski ravni - Elementi tipa 10 (IEC 61158-6-10:2014)
Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil obravnavati kot »okno med ustreznimi aplikacijami«.
Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 10. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja.
Ta standard na abstrakten način določa na zunaj vidno opravilo, ki ga zagotavlja aplikacijski nivo procesnih vodil tipa 10 v smislu
a) abstraktne sintakse, ki določa podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo,
a) prenosne sintakse, ki določa podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo,
c) stroja stanja aplikacijskega konteksta, ki opredeljuje vedenje aplikacijskega opravila, vidnega med aplikacijskimi osebki, ki komunicirajo, in
d) strojev stanja aplikacijskega razmerja, ki opredeljujejo komunikacijsko vedenje med aplikacijskimi osebki, ki komunicirajo.
Namen tega standarda je opredeliti protokol, ki se zagotavlja za
a) določitev žične predstavitve primitivov opravil iz standarda IEC 61158-5-10 in
b) določitev zunanje vidnega vedenja, povezanega z njihovim prenosom.
Ta standard določa protokol aplikacijskega nivoja procesnih vodil tipa 10 v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN 61158-6-10:2012
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-10. del:
Specifikacija protokola na aplikacijski ravni - Elementi tipa 10 (IEC 61158-6-
10:2014)
Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer
protocol specification - Type 10 elements (IEC 61158-6-10:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-10: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 10-Elemente (IEC 61158-6-10:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-10:
Spécification du protocole de la couche application - Eléments de type 10 (CEI 61158-6-
10:2014)
Ta slovenski standard je istoveten z: EN 61158-6-10:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61158-6-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-6-10:2012
English Version
Industrial communication networks - Fieldbus specifications -
Part 6-10: Application layer protocol specification - Type 10
elements
(IEC 61158-6-10:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 6-10:
bus de terrain - Partie 6-10: Spécification du protocole de la Protokollspezifikation des Application Layer
couche application - Eléments de type 10 (Anwendungsschicht) - Typ 10-Elemente
(CEI 61158-6-10:2014) (IEC 61158-6-10:2014)
This European Standard was approved by CENELEC on 2014-09-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-6-10:2014 E
Foreword
The text of document 65C/764/FDIS, future edition 3 of IEC 61158-6-10, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-10:2014.
The following dates are fixed:
(dop) 2015-06-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-23
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 61158-6-10:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-6-10:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
IEC 61784-3-3 NOTE Harmonized as EN 61784-3-3.
IEC 60793-2-30 NOTE Harmonized as EN 60793-2-30.
IEC 60793-2-40 NOTE Harmonized as EN 60793-2-40.
- 3 - EN 61158-6-10:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-1 2014 Industrial communication networks - EN 61158-1 2014
Fieldbus specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series
IEC 61158-2 2014 Industrial communication networks - EN 61158-2 2014
Fieldbus specifications -
Part 2: Physical layer specification and
service definition
IEC 61158-5-10 2014 Industrial communication networks - EN 61158-5-10 2014
Fieldbus specifications -
Part 5-10: Application layer service
definition - Type 10 elements
IEC 61158-6-3 2014 Industrial communication networks - EN 61158-6-3 2014
Fieldbus specifications -
Part 6-3: Application layer protocol
specification - Type 3 elements
IEC 61588 - Precision clock synchronization protocol for - -
networked measurement and control
systems
IEC 62439-2 - Industrial communication networks - High EN 62439-2 -
availability automation networks -
Part 2: Media Redundancy Protocol (MRP)
ISO/IEC 646 1991 Information technology - ISO 7-bit coded - -
character set for information interchange
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
Publication Year Title EN/HD Year
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of
basic notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
IEEE 754 - IEEE Standard for Floating-Point Arithmetic - -
IEEE 802 - IEEE Standard for Local and Metropolitan - -
Area Networks: Overview and Architecture
IEEE 802.1AB 2005 IEEE Standard for Local and metropolitan - -
area networks - Station and Media Access
Control Connectivity Discovery
IEEE 802.1AS - IEEE Standard for Local and Metropolitan - -
Area Networks - Timing and
Synchronization for Time-Sensitive
Applications in Bridged Local Area
Networks
IEEE 802.1D - IEEE Standard for local and metropolitan - -
area networks - Media Access Control
(MAC) Bridges
IEEE 802.1Q - IEEE Standard for Local and metropolitan - -
area networks - Media Access Control
(MAC) Bridges and Virtual Bridged Local
Area Networks
IEEE 802.3 - IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 3: Carrier Sense Multiple Access with
Collision Detection (CSMA/CD) Access
Method and Physical Layer Specifications
IEEE 802.11 - IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 11: Wireless LAN Medium Access
Control (MAC) and Physical Layer (PHY)
Specifications
- 5 - EN 61158-6-10:2014
Publication Year Title EN/HD Year
IEEE 802.15.1 2005 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 15.1: Wireless medium access control
(MAC) and physical layer (PHY)
specifications for wireless personal area
networks (WPANs)
IETF RFC 768 - User Datagram Protocol - -
IETF RFC 791 - Internet Protocol - -
IETF RFC 792 - Internet Control Message Protocol - -
IETF RFC 826 - Ethernet Address Resolution Protocol: Or - -
Converting Network Protocol Addresses to
48.bit Ethernet Address for Transmission
on Ethernet Hardware
IETF RFC 1034 - Domain names - concepts and facilities - -
IETF RFC 1213 - Management Information Base for Network - -
Management of TCP/IP-based Internets:
MIB-II
IETF RFC 2131 - Dynamic Host Configuration Protocol - -
IETF RFC 2132 - DHCP Options and BOOTP Vendor - -
Extensions
IETF RFC 2236 - Internet Group Management Protocol, - -
Version 2
IETF RFC 2365 - Administratively Scoped IP Multicast - -
IETF RFC 2474 - Definition of the Differentiated Services - -
Field (DS Field) in the IPv4 and IPv6
Headers
IETF RFC 2674 - Definitions of Managed Objects for Bridges - -
with Traffic Classes, Multicast Filtering and
Virtual LAN Extensions
IETF RFC 2863 - The Interfaces Group MIB - -
IETF RFC 3418 - Management Information Base (MIB) for - -
the Simple Network Management Protocol
(SNMP)
IETF RFC 3621 - Power Ethernet MIB - -
IETF RFC 4361 - Node-specific Client Identifiers for Dynamic - -
Host Configuration Protocol Version Four
(DHCPv4)
IETF RFC 4363 - Definitions of Managed Objects for Bridges - -
with Traffic Classes, Multicast Filtering, and
Virtual LAN Extensions
IETF RFC 4836 - Definitions of Managed Objects for - -
IEEE 802.3 Medium Attachment Units
(MAUs)
IETF RFC 5735 - Special Use IPv4 Addresses - -
Publication Year Title EN/HD Year
IETF RFC 5890 - Internationalized Domain Names for - -
Applications (IDNA): Definitions and
Document Framework
The Open Group - - Technical Standard DCE1.1: Remote - -
Publication C706 Procedure Call
IEC 61158-6-10 ®
Edition 3.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Fieldbus specifications –
Part 6-10: Application layer protocol specification – Type 10 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 6-10: Spécification du protocole de la couche application – Eléments
de type 10
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-1761-0
– 2 – IEC 61158-6-10:2014 © IEC 2014
CONTENTS
FOREWORD . 28
INTRODUCTION . 31
1 Scope . 33
1.1 General . 33
1.2 Specifications . 33
1.3 Conformance . 34
2 Normative references . 34
3 Terms, definitions, abbreviations, symbols and conventions . 36
3.1 Referenced terms and definitions . 36
3.2 Additional terms and definitions for decentralized periphery . 37
3.3 Abbreviations and symbols . 45
3.4 Conventions . 48
4 Application layer protocol specification for common protocols . 56
4.1 FAL syntax description . 56
4.2 Transfer syntax . 59
4.3 Discovery and basic configuration .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.