EN IEC 62769-103-1:2020
(Main)Field device integration (FDI) - Part 103-1: Profiles - PROFIBUS
Field device integration (FDI) - Part 103-1: Profiles - PROFIBUS
IEC 62769-103-1:2020 is available as IEC 62769-103-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-103-1:2020 specifies an FDI profile of IEC 62769 for IEC 61784 1_CP 3/1 (PROFIBUS DP) and IEC 61784 1_CP3/2 (PROFIBUS PA). This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) support for generic protocol extension for faster adoption of other technologies; b) support for Package Developers to build EDDs targeted for today’s EDD bases system under a single development tool.
Feldgeräteintegration (FDI) - Teil 103-1: Profile - PROFIBUS
Intégration des appareils de terrain (FDI) - Partie 103-1: Profils - PROFIBUS
IEC 62769-103-1:2020 est disponible sous forme de IEC 62769-103-1:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.IEC 62769-103-1:2020 spécifie un profil FDI de l’IEC 62769 pour l’IEC 61784 1_CP 3/1 (PROFIBUS DP) et l’IEC 61784 1_CP 3/2 (PROFIBUS PA). Cette deuxième édition annule et remplace la première édition parue en 2015. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) prise en charge d’extensions de protocoles génériques, pour une adoption plus rapide d’autres technologies; b) capacité offerte aux Développeurs de Paquetages d’élaborer des EDD ciblant les systèmes actuels de bases EDD, en exploitant un seul outil de développement.
Vključitev procesne naprave (FDI) - 103-1. del: Profili - PROFIBUS (IEC 62769-103-1:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2020
Nadomešča:
SIST EN 62769-103-1:2015
Vključitev procesne naprave (FDI) - 103-1. del: Profili - PROFIBUS (IEC 62769-103-
1:2020)
Field Device Integration (FDI) - Part 103-1: Profiles - PROFIBUS (IEC 62769-103-
1:2020)
Feldgeräteintegration (FDI) Teil 103-1: Profile - PROFIBUS (IEC 62769-103-1:2020)
Intégration des appareils de terrain (FDI) - Partie 103-1: Profils - PROFIBUS (IEC 62769-
103-1:2020)
Ta slovenski standard je istoveten z: EN IEC 62769-103-1:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62769-103-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 25.040.40; 35.100.05 Supersedes EN 62769-103-1:2015 and all of its
amendments and corrigenda (if any)
English Version
Field device integration (FDI) - Part 103-1: Profiles - PROFIBUS
(IEC 62769-103-1:2020)
Intégration des appareils de terrain (FDI) - Partie 103-1: Feldgeräteintegration (FDI) Teil 103-1: Profile - PROFIBUS
Profils - PROFIBUS (IEC 62769-103-1:2020)
(IEC 62769-103-1:2020)
This European Standard was approved by CENELEC on 2020-06-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-103-1:2020 E
European foreword
The text of document 65E/622/CDV, future edition 2 of IEC 62769-103-1, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-103-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-03-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-06-02
document have to be withdrawn
This document supersedes EN 62769-103-1:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62769-103-1:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61784-1 NOTE Harmonized as EN IEC 61784-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61804 series Function blocks (FB) for process control EN IEC 61804 series
and electronic device description
language (EDDL)
IEC 62541-100 2015 OPC Unified Architecture - Part 100: EN 62541-100 2015
Device Interface
IEC 62769-2 - Field Device Integration (FDI) - Part 2: - -
FDI Client
IEC 62769-4 - Field Device Integration (FDI) - Part 4: - -
FDI Packages
IEC 62769-5 - Field Device Integration (FDI) - Part 5: - -
FDI Information Model
IEC 62769-7 - Field Device Integration (FDI) - Part 7: - -
FDI Communication Devices
PI Order No. 2008 Specification for PROFIBUS - Device - -
2.122 Description and Device Integration -
Volume 1: GSD, V5.1, July 2008: GSD
Under preparation. Stage at the time of publication: IEC/RFDIS 62769-2:2020.
Under preparation. Stage at the time of publication: IEC/RFDIS 62769-4:2020.
Under preparation. Stage at the time of publication: IEC/RFDIS 62769-5:2020.
Under preparation. Stage at the time of publication: IEC/RFDIS 62769-7:2020.
IEC 62769-103-1 ®
Edition 2.0 2020-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device integration (FDI) –
Part 103-1: Profiles – PROFIBUS
Intégration des appareils de terrain (FDI) –
Partie 103-1: Profils – PROFIBUS
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-8114-7
– 2 – IEC 62769-103-1:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and conventions . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms and acronyms . 7
3.3 Conventions . 7
3.3.1 EDDL syntax. 7
3.3.2 XML syntax . 7
3.3.3 Capitalizations . 7
4 Profile for PROFIBUS . 8
4.1 General . 8
4.2 Catalog profile . 8
4.2.1 Protocol support file . 8
4.2.2 CommunicationProfile definition . 8
4.2.3 Profile device . 9
4.2.4 Protocol version information . 9
4.3 Associating a Package with a device . 10
4.3.1 Device type identification mapping . 10
4.3.2 Device type revision mapping . 11
4.4 Information Model mapping . 12
4.4.1 ProtocolType definition . 12
4.4.2 DeviceType mapping . 13
4.4.3 FunctionalGroup identification definition . 13
4.5 Topology elements . 13
4.5.1 ConnectionPoint definition . 13
4.5.2 Communication Device definition . 15
4.5.3 Communication service provider definition . 16
4.5.4 Network definition . 17
4.6 Methods . 17
4.6.1 Methods for FDI Communication Servers . 17
4.6.2 Methods for Gateways . 20
Annex A (normative) Topology Scan result schema . 26
A.1 General . 26
A.2 Network . 26
A.3 ProfibusNetworkT . 26
A.4 ProfibusConnectionPointT . 26
A.5 ProfibusIdentificationT . 27
A.6 ProfibusAddressT . 28
Annex B (normative) Transfer service parameters . 29
B.1 General . 29
B.2 sendData . 29
B.3 xsreceiveData . 29
B.4 xsTransferSendDataT . 29
B.5 TransferResultDataT . 30
B.6 OperationT . 30
IEC 62769-103-1:2020 © IEC 2020 – 3 –
Bibliography . 31
Figure 1 – Version mapping problem . 11
Table 1 – ProtocolSupportFile for FDI Device Packages . 8
Table 2 – ProtocolSupportFile for FDI Communication Packages . 8
Table 3 – PROFIBUS CommunicationProfile definition schema . 9
Table 4 – Catalog values for profile devices . 9
Table 5 – Version mapping examples . 9
Table 6 – Device identification information mapping . 11
Table 7 – Protocol type Profibus_DP . 12
Table 8 – Protocol type Profibus_PA . 12
Table 9 – DeviceType property mapping . 13
Table 10 – PROFIBUS Device Types identification attributes . 13
Table 11 – ConnectionPoint type for Profibus_DP . 14
Table 12 – ConnectionPoint type for Profibus_PA . 15
Table 13 – Method Connect argument
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.