EN 50289-3-6:2001
(Main)Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods - Impact resistance of the cable
Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods - Impact resistance of the cable
This Part 3-6 of EN 50289 details the method of test to determine the impact resistance of the cable used in analogue and digital communication systems. It is to be read in conjunction with Part 3-1 of EN 50289, which contains essential provisions for its application.
Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 3-6: Mechanische Prüfverfahren - Schlagbeständigkeit des Kabels
Câbles de communication - Spécifications des méthodes d'essai - Partie 3-6: Méthodes d'essais mécaniques - Résistance aux impacts du câble
La présente partie 3-6 de la Norme européenne EN 50289 détaille les méthodes d'essai pour la détermination de la résistance aux impacts des câbles finis utilisés dans les systèmes de communication analogiques et numériques. Elle doit être lue avec la partie 3-1 de la Norme européenne EN 50289 qui contient les dispositions essentielles pour l'application de la présente partie.
Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods - Impact resistance of the cable
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2002
Communication cables - Specifications for test methods - Part 3-6: Mechanical test
methods - Impact resistance of the cable
Communication cables - Specifications for test methods -- Part 3-6: Mechanical test
methods - Impact resistance of the cable
Kommunikationskabel - Spezifikationen für Prüfverfahren -- Teil 3-6: Mechanische
Prüfverfahren - Schlagbeständigkeit des Kabels
Câbles de communication - Spécifications des méthodes d'essai -- Partie 3-6: Méthodes
d'essais mécaniques - Résistance aux impacts du câble
Ta slovenski standard je istoveten z: EN 50289-3-6:2001
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50289-3-6
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2001
ICS 33.120.10
English version
Communication cables -
Specifications for test methods
Part 3-6: Mechanical test methods -
Impact resistance of the cable
Câbles de communication - Kommunikationskabel -
Spécifications des méthodes d'essai Spezifikationen für Prüfverfahren
Partie 3-6: Méthodes d'essais mécaniques - Teil 3-6: Mechanische Prüfverfahren -
Résistance aux impacts du câble Schlagbeständigkeit des Kabels
This European Standard was approved by CENELEC on 2001-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50289-3-6:2001 E
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 46X, Communication
cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as EN 50289-3-6 on 2001-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-04-01
This European Standard has been prepared under the European Mandate M/212 given to CENELEC by
the European Commission and the European Free Trade Association.
- 3 - EN 50289-3-6:2001
Contents
1 Scope . 4
2 Normative references. 4
3 Definitions . 4
4 Test method. 4
4.1 Sample . 4
4.1.1 Sample length. 4
4.1.2 Termination . 4
4.2 Equipment . 5
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.