Communication cables - Specifications for test methods - Part 1-12: Electrical test methods - Inductance

This Part 1-12 of EN 50289 details the test methods to determine the inductance characteristics of cables used in analogue and digital communication systems. It is to be read in conjunction with EN 50289 1 1, which contains essential provisions for its application.

Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 1-12: Elektrische Prüfverfahren - Induktivität

Dieser Teil 1-12 der EN 50289 beschreibt das Prüfverfahren zur Bestimmung der Induktivität von Kabeln, die in analogen und digitalen Kommunikationssystemen eingesetzt werden. Er ist mit EN 50289-1-1 anzuwenden, wo grundlegende Festlegungen zur Anwendung dieser Norm getroffen sind.

Câbles de communication - Spécifications des méthodes d'essai - Partie 1-12: Méthodes d'essais électriques - Inductance

La présente Partie 1-12 de l’EN 50289 décrit les méthodes d’essai pour déterminer l’inductance des câbles utilisés dans des systèmes de communication analogiques et numériques. Elle est à lire conjointement avec l’EN 50289 1 1, qui contient des dispositions essentielles pour son application

Komunikacijski kabli – Specifikacije preskusnih metod – 1-12. del: Električne preskusne metode – Induktivnost

General Information

Status
Published
Publication Date
28-Apr-2005
Withdrawal Date
30-Nov-2007
Drafting Committee
Parallel Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
11-Mar-2020

Buy Standard

Standard
EN 50289-1-12:2005
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI SIST EN 50289-1-12:2005

STANDARD
november 2005
Komunikacijski kabli – Specifikacije preskusnih metod – 1-12. del: Električne
preskusne metode – Induktivnost
Communication cables - Specifications for test methods - Part 1-12: Electrical test
methods - Inductance
ICS 33.120.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 50289-1-12
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2005
ICS 33.120.20
English version
Communication cables -
Specifications for test methods
Part 1-12: Electrical test methods -
Inductance
Câbles de communication -  Kommunikationskabel -
Spécifications des méthodes d'essai Spezifikationen für Prüfverfahren
Partie 1-12: Méthodes d'essais Teil 1-12: Elektrische Prüfverfahren -
électriques - Induktivität
Inductance
This European Standard was approved by CENELEC on 2004-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50289-1-12:2005 E
Foreword
This European Standard was prepared by the CENELEC Technical Committee TC 46X,
Communication cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as EN 50289-1-12 on 2004-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-12-01
This European Standard has been prepared under the European Mandate M/212 given to CENELEC by the
European Commission and the European Free Trade Association.
__________
– 3 – EN 50289-1-12:2005
Contents
1 Scope.4
2 Normative references.4
3 Definitions.4
4 Test method.5
4.1 Equipment. 5
4.2 Test sample. 5
4.3 Calibration. 5
4.4 Test set-up. 5
4.5 Measuring procedure.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.