EN 61788-10:2006

Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method

This part of IEC 61788 specifies a test method for the resistive determination of the critical temperature of composite superconductors for industrial use. The composite superconductors covered in this standard include Cu/Nb-Ti, Cu/Cu-Ni/Nb-Ti and Cu-Ni/Nb-Ti composite superconductors, Cu/Nb3Sn and Cu/Nb3Al composite superconductors, and metal-sheathed MgB2 composite superconductors, and metal-stabilized Bi-system oxide superconductors and Yttrium- or rare-earth-based coated conductors that have a monolithic structure and a shape of round, flat or square wire containing mono- or multi-cores of superconductors.

Supraleitfähigkeit - Teil 10: Messung der kritischen Temperatur - Kritische Temperatur von Verbundsupraleitern bestimmt durch ein Widerstandsmessverfahren

Supraconductivité - Partie 10: Mesure de la température critique - Température critique des composites supraconducteurs par une méthode par résistance

La présente partie de la CEI 61788 décrit une méthode d'essai permettant de déterminer par résistivité la température critique des composites supraconducteurs pour utilisation industrielle. La présente norme couvre des composites supraconducteurs tels que les Cu/Nb-Ti, les Cu/Cu-Ni/Nb-Ti, les Cu-Ni/Nb-Ti, les Cu/Nb3Sn, les Cu/Nb3Al, les MgB2 à gaine métallique, les oxydes supraconducteurs à base Bi stabilisés au métal, ainsi que les conducteurs avec couche d'Yttrium ou de terre rare qui ont une structure monolithique et se présentent sous la forme de fils ronds ou de rubans plats ou carrés constitués de supraconducteurs monofilamentaires ou multifilamentaires.

Superprevodnost - 10. del: Meritve kritične temperature - Merjenje kritične temperature kompozitnih superprevodnikov z metodo upornosti (IEC 61788-10:2006)

General Information

• Status: Published
• Publication Date: 17-Oct-2006
• Withdrawal Date: 31-Aug-2009
• ICS: 29.050 - Superconductivity and conducting materials
• Technical Committee: CLC/SR 90 - Superconductivity
• Drafting Committee: IEC/TC 90 - IEC_TC_90
• Parallel Committee: IEC/TC 90 - IEC_TC_90
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Oct-2006
• Completion Date: 18-Oct-2006
• Ref Project: SIST EN 61788-10:2007 - Superconductivity -- Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method

Relations

• Replaces: EN 61788-10:2002 - Superconductivity - Part 10: Critical temperature measurement - Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61788-10:2007
01-februar-2007
1DGRPHãþD
SIST EN 61788-10:2003
6XSHUSUHYRGQRVWGHO0HULWYHNULWLþQHWHPSHUDWXUH0HUMHQMHNULWLþQH
WHPSHUDWXUHNRPSR]LWQLKVXSHUSUHYRGQLNRY]PHWRGRXSRUQRVWL,(&

Superconductivity - Part 10: Critical temperature measurement - Critical temperature of
composite superconductors by a resistance method
Supraleitfähigkeit - Teil 10: Messung der kritischen Temperatur - Kritische Temperatur
von Verbundsupraleitern bestimmt durch ein Widerstandsmessverfahren
Supraconductivité - Partie 10: Mesure de la température critique - Température critique
des composites supraconducteurs par une méthode par résistance
Ta slovenski standard je istoveten z: EN 61788-10:2006
ICS:
17.220.20
29.050
SIST EN 61788-10:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61788-10

NORME EUROPÉENNE
October 2006
EUROPÄISCHE NORM

ICS 29.050 Supersedes EN 61788-10:2002


English version


Superconductivity
Part 10: Critical temperature measurement -
Critical temperature of composite superconductors
by a resistance method
(IEC 61788-10:2006)


Supraconductivité  Supraleitfähigkeit
Partie 10: Mesure de la température Teil 10: Messung der kritischen
critique - Temperatur -
Température critique Kritische Temperatur
des composites supraconducteurs von Verbundsupraleitern bestimmt
par une méthode par résistance durch ein Widerstandsmessverfahren
(CEI 61788-10:2006) (IEC 61788-10:2006)




This European Standard was approved by CENELEC on 2006-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61788-10:2006 E

---------------------- Page: 2 ----------------------

EN 61788-10:2006 - 2 -
Foreword
The text of document 90/191/FDIS, future edition 2 of IEC 61788-10, prepared by IEC TC 90,
Superconductivity, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61788-10 on 2006-09-01.
This European Standard supersedes EN 61788-10:2002.
Modifications made in this EN 61788-10:2006 mostly increase covered composite superconductors in this
standard, i.e. Cu/Nb Al and metal-sheathed MgB composite superconductors and Yttrium- or rare-earth-
3 2
based coated conductors are added. Furthermore, examples of technical change made are the base
plate dimension and definition of the bending strain.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61788-10:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61788-10:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Titl
...