EN 62282-6-200:2017
(Main)Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
IEC 62282-6-200:2016 specifies test methods for the performance evaluation of micro fuel cell power systems for laptop computers, mobile phones, personal digital assistants (PDAs), cordless home appliances, TV broadcast cameras, autonomous robots, etc. This new edition includes the following significant technical changes with respect to the previous edition: - deletion of 5.3 (Fuel consumption test) as it was impractical to measure the actual consumption rate of some kinds of fuels; - addition and modification of some terms and definitions.
Brennstoffzellentechnologien - Teil 6-200: Mikro-Brennstoffzellen-Energiesysteme - Leistungskennwerteprüfverfahren
Technologies des piles à combustible - Partie 6-200: Systèmes à micropiles à combustible - Méthodes d'essai des performances
L'IEC 62282-6-200:2016 spécifie des méthodes d'essai pour l'évaluation des performances des systèmes à micropiles à combustible pour les ordinateurs portables, les téléphones mobiles, les assistants numériques personnels (PDA), les appareils électroménagers sans fil, les caméras de télédiffusion, les robots autonomes, etc. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - suppression de 5.3 (Essai de consommation de combustible) car il ne permettait pas de mesurer la vitesse de consommation réelle de certains types de combustibles; - addition et modification de certains termes et définitions.
Tehnologija gorivnih celic - 6-200. del: Tehnologija mikro gorivnih celic - Preskusne metode delovanja (IEC 62282-6-200:2016)
Ta del standarda IEC 62282 določa preskusne metode za ocenjevanje delovanja napajalnih sistemov z mikro gorivnimi celicami za prenosne računalnike, mobilne telefone, osebne digitalne beležnice (PDA), brezžične gospodinjske aparate, televizijske kamere, avtonomne robote idr.
Ta standard opisuje preskusne metode delovanja za električne lastnosti in mehanično vzdržljivost napajalnih sistemov z mikro gorivnimi celicami, ki imajo izhodno napetost do 60 V DC in 240 VA. Funkcionalna razporeditev značilnega primera napajalnega sistema z mikro gorivnimi celicami, ki je ocenjena v skladu s tem dokumentom, je prikazana na sliki 1.
Ta dokument ne obravnava varnosti napajalnih sistemov z mikro gorivnimi celicami.
Ta dokument ne obravnava zamenljivosti napajalnih sistemov z mikro gorivnimi celicami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2017
1DGRPHãþD
SIST EN 62282-6-200:2012
Tehnologija gorivnih celic - 6-200. del: Tehnologija mikro gorivnih celic -
Preskusne metode delovanja (IEC 62282-6-200:2016)
Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test
methods (IEC 62282-6-200:2016)
Brennstoffzellentechnologien - Teil 6-200: Mikro-Brennstoffzellen-Energiesysteme -
Leistungskennwerteprüfverfahren (IEC 62282-6-200:2016)
Technologies des piles à combustible - Partie 6-200: Systèmes à micro-piles à
combustible - Méthodes d'essai des performances (IEC 62282-6-200:2016)
Ta slovenski standard je istoveten z: EN 62282-6-200:2017
ICS:
27.070 Gorilne celice Fuel cells
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62282-6-200
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2017
ICS 27.070 Supersedes EN 62282-6-200:2012
English Version
Fuel cell technologies -
Part 6-200: Micro fuel cell power systems -
Performance test methods
(IEC 62282-6-200:2016)
Technologies des piles à combustible - Brennstoffzellentechnologien -
Partie 6-200: Systèmes à micropiles à combustible - Teil 6-200: Mikro-Brennstoffzellen-Energiesysteme -
Méthodes d'essai des performances Leistungskennwerteprüfverfahren
(IEC 62282-6-200:2016) (IEC 62282-6-200:2016)
This European Standard was approved by CENELEC on 2016-10-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62282-6-200:2017 E
European foreword
The text of document 105/527/CDV, future edition 3 of IEC 62282-6-200, prepared by IEC/TC 105
"Fuel cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 62282-6-200:2017.
The following dates are fixed:
(dop) 2017-07-27
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-10-27
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 62282-6-200:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62282-6-200:2016 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-6 - Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60721-3-7 - Classification of environmental conditions - EN 60721-3-7 -
Part 3: Classification of groups of
environmental parameters and their
severities -
Section 7: Portable and non-stationary use
IEC/TS 62282-1 2013 Fuel cell technologies - - -
Part 1: Terminology
ISO/IEC 17025 - General requirements for the competence of EN ISO/IEC 17025 -
testing and calibration laboratories
IEC 62282-6-200 ®
Edition 3.0 2016-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fuel cell technologies –
Part 6-200: Micro fuel cell power systems – Performance test methods
Technologies des piles à combustible –
Partie 6-200: Systèmes à micropiles à combustible – Méthodes d’essai
des performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.070 ISBN 978-2-8322-3628-4
– 2 – IEC 62282-6-200:2016 © IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 7
4 General principles . 8
4.1 Testing environment . 8
4.2 Minimum required measurement accuracy . 8
4.3 Measuring instruments . 9
4.3.1 General . 9
4.3.2 Voltage . 9
4.3.3 Current . 9
4.3.4 Time . 9
4.3.5 Weight . 9
4.3.6 Temperature . 9
4.3.7 Humidity . 9
4.3.8 Pressure . 9
4.3.9 Vibration frequency . 9
4.3.10 Volume . 9
5 Tests . 10
5.1 Test procedure . 10
5.2 Power generation characteristics . 10
5.2.1 Starting duration . 10
5.2.2 Rated power test and rated voltage test . 10
5.2.3 Power generation test after idle condition . 10
5.2.4 Power generation test at low and high temperatures . 11
5.2.5 Power generation test under low and high humidity conditions . 11
5.2.6 Altitude test . 11
5.3 Mechanical durability tests . 12
5.3.1 Drop test . 12
5.3.2 Vibration test . 12
6 Labelling and marking . 13
7 Test report . 13
Bibliography . 17
Figure 1 – Micro fuel cell power system block diagram . 6
Table 1 – Drop height . 12
Table 2 – Vibration condition . 13
Table 3 – Test report of micro fuel cell power system – Performance test . 14
IEC 62282-6-200:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
FUEL CELL TECHNOLOGIES –
Part 6-200: Micro fuel cell power systems –
Performance test methods
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62282-6-200 h
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.