EN 50216-10:2009
(Main)Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
EN 50216-10 describes oil-to-air heat exchangers that means a heat exchanger for the cooling of the transformer oil using a forced oil circuit and a forced air circuit. The oil-to-air heat exchangers are not included in the scope of the Pressure Equipment Directive 97/23/EC according to Article 1, § 3.12. This standard establishes essential dimensions and the requirements to ensure interchangeability and adequate mounting of the oil-to-air heat exchangers. This standard applies for dimensions and requirements of oil-to-air heat exchangers. The increase of ratings and constructional changes as well are considered in the revised standard.
Zubehör für Transformatoren und Drosselspulen - Teil 10: Öl-Luft-Kühler
EN 50216-10 behandelt Öl-Luft-Kühler, d. h. Wärmetauscher für die Ölkühlung von Transformatoren mittels erzwungenem Ölumlauf und mittels erzwungener Luftkühlung. Die Öl-Luft-Kühler fallen nicht in den Anwendungsbereich der Druckgeräterichtlinie RL 97/23/EG nach Artikel 1, § 3.12. Diese Norm legt grundlegende Abmessungen und Anforderungen fest, um Austauschbarkeit und einheitliche Montage der Öl-Luft-Kühler sicherzustellen.
Accessoires pour transformateurs de puissance et bobines d'inductance - Partie 10: Echangeurs thermiques huile-air
La EN 50216-10 traite des échangeurs thermiques huile-air, ce qui signifie un échangeur thermique pour le refroidissement de l'huile de transformateur en utilisant un circuit à huile forcée et un circuit à air forcé. Les échangeurs thermiques huile-air ne sont pas inclus dans le domaine d’application de la Directive 97/23/CE relative aux Equipements sous pression, selon l'Article 1, § 3.12. La présente norme établit les dimensions essentielles et les exigences pour assurer l'interchangeabilité et le bon montage des échangeurs thermiques huile-air.
Pribor za energijske transformatorje in dušilke - 10. del: Toplotni izmenjevalnik olje-zrak
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50216-10:2009
01-maj-2009
Pribor za energijske transformatorje in dušilke - 10. del: Toplotni izmenjevalnik olje
-zrak
Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
Zubehör für Transformatoren und Drosselspulen - Teil 10: Öl-Luft-Kühler
Accessoires pour transformateurs de puissance et bobines d'inductance - Partie 10:
Echangeurs thermiques huile-air
Ta slovenski standard je istoveten z: EN 50216-10:2009
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN 50216-10:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50216-10:2009
---------------------- Page: 2 ----------------------
SIST EN 50216-10:2009
EUROPEAN STANDARD
EN 50216-10
NORME EUROPÉENNE
March 2009
EUROPÄISCHE NORM
ICS 29.180
English version
Power transformer and reactor fittings -
Part 10: Oil-to-air heat exchangers
Accessoires pour transformateurs Zubehör für Transformatoren
de puissance et bobines d'inductance - und Drosselspulen -
Partie 10: Echangeurs thermiques Teil 10: Öl-Luft-Kühler
huile-air
This European Standard was approved by CENELEC on 2008-10-21. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50216-10:2009 E
---------------------- Page: 3 ----------------------
SIST EN 50216-10:2009
EN 50216-10:2009 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 14, Power transformers.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50216-10 on
2008-10-21.
This European Standard is to be read in conjunction with EN 50216-1:2002, Power transformer and reactor
fittings - Part 1: General.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-11-01
__________
---------------------- Page: 4 ----------------------
SIST EN 50216-10:2009
– 3 – EN 50216-10:2009
Contents
1 Scope . 4
2 Normative references . 4
3 Definitions . 4
4 Requirements . 5
4.1 Rated values . 5
4.2 Rated cooling capacity . 5
4.3 Mechanical design . 6
4.4 Protection of surfaces . 6
5 Designation .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.