EN 61784-2:2010

Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3

Supersedes EN 61784-2:2008 * Superseded by EN 61784-2:2014

Industrielle Kommunikationsnetze - Profile - Teil 2: Zusätzliche Feldbusprofile für Echtzeitnetzwerke basierend auf ISO/IEC 8802-3

Réseaux de communication industriels - Profils - Partie 2: Profils supplémentaires des bus de terrain pour les réseaux temps réel basés sur l’ISO/CEI 8802-3

Industrijska komunikacijska omrežja - Profili - 2. del: Dodatni profili procesnih vodil za omrežja, ki delujejo v realnem času po ISO/IEC 8802-3 (IEC 61784-2:2010)

Ta del IEC 61784 določa: – kazalnike uspešnosti, ki podpirajo klasifikacijske sheme za zahteve za realno-časovni eternet (RTE); - profile in povezane omrežne komponente, osnovane na ISO/IEC 8802-3, IEC 61158 serije in 61784-1; - rešitve za RTE, ki lahko tečejo vzporedno z na ISO/IEC 8802-3 osnovanimi uporabami. Ti komunikacijski profili se imenujejo realno-časovni eternet komunikacijski profili.

General Information

• Status: Withdrawn
• Publication Date: 07-Oct-2010
• Withdrawal Date: 31-Aug-2013
• ICS: 35.100.20 - Data link layer
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 21-Aug-2017
• Completion Date: 21-Aug-2017
• Ref Project: SIST EN 61784-2:2010 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 (IEC 61784-2:2010)

Relations

• Replaces: EN 61784-2:2008 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
• Effective Date: 29-Jan-2023
• Replaced By: EN 61784-2:2014 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61784-2:2010
01-december-2010
1DGRPHãþD
SIST EN 61784-2:2008
,QGXVWULMVNDNRPXQLNDFLMVNDRPUHåMD3URILOLGHO'RGDWQLSURILOLSURFHVQLK
YRGLO]DRPUHåMDNLGHOXMHMRYUHDOQHPþDVXSR,62,(&,(&
Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-
time networks based on ISO/IEC 8802-3 (IEC 61784-2:2010)
Industrielle Kommunikationsnetze - Profile - Teil 2: Zusätzliche Feldbusprofile für
Echtzeitnetzwerke basierend auf ISO/IEC 8802-3 (IEC 61784-2:2010)
Réseaux de communication industriels - Profils - Partie 2: Profils supplémentaires des
bus de terrain pour les réseaux temps réel basés sur l’ISO/CEI 8802-3 (CEI 61784-
2:2010)
Ta slovenski standard je istoveten z: EN 61784-2:2010
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN 61784-2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61784-2:2010

---------------------- Page: 2 ----------------------

SIST EN 61784-2:2010

EUROPEAN STANDARD
EN 61784-2

NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM

ICS 35.100.20; 35.240.50 Supersedes EN 61784-2:2008


English version


Industrial communication networks -
Profiles -
Part 2: Additional fieldbus profiles for real-time networks based
on ISO/IEC 8802-3
(IEC 61784-2:2010)


Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 2: Profils supplémentaires des bus Teil 2: Zusätzliche Feldbusprofile
de terrain pour les réseaux temps réel für Echtzeitnetzwerke basierend
basés sur l’ISO/CEI 8802-3 auf ISO/IEC 8802-3
(CEI 61784-2:2010) (IEC 61784-2:2010)




This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-2:2010 E

---------------------- Page: 3 ----------------------

SIST EN 61784-2:2010
EN 61784-2:2010 - 2 -
Foreword
The text of document 65C/601/FDIS, future edition 2 of IEC 61784-2, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-2 on 2010-09-01.
This European Standard supersedes EN 61784-2:2008.
The main changes with respect to EN 61784-2:2008 are listed below:
a) update of the dated references to the EN 61158 series, to EN 61784-1, to the EN 61784-3 series, to
the EN 61784-5 series and to EN 61918 throughout the document;
b) update of selection tables for CPF 2, CPF 3, CPF 11 and CPF 14;
c) addition of a new profile CP 11/2 in 12.3;
d) addition of a new profile CP 14/3 in subclause 15.5;
e) addition of a new Communication Profile Family - CPF 17;
– new subclause 3.3.12 (CPF 17 symbols);
– new Clause 18 for CPF 17 with one profile;
f) addition of a new Communication Profile Family - CPF 18;
– new subclause 3.3.13 (CPF 18 symbols);
– new Clause 19 for CPF 18 with one profile;
– specification changes for CPF3;
g) update of the requirements for all conformance classes;
h) added precise timing requirements for IP;
i) updated timing requirements for IO devices;
j) added precise timing requirements for PTCP;
k) increasing the amount of synchronized devices in line;
l) integrating the fast startup as additional feature.
Attention is drawn to the possibility that some of the elements
...