EN 62320-2:2008

Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AIS AtoN Stations - Operational and performance requirements, methods of testing and required test results

IEC 62320-2:2008(E) specifies the operational and performance requirements, methods of testing and required test results for AIS AtoN Stations compatible with the performance standards adopted by IMO Res. MSC.74(69), annex 3, Universal AIS. Incorporates the technical characteristics of non-shipborne AIS AtoN equipment, included in the relevant ITU-R and IALA Recommendations. Also takes into account the ITU Radio Regulations, where applicable.

Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt - Automatische Identifikationssysteme (AIS) - Teil 2: AIS-AtoN-Stationen - Mindest-Betriebs- und -Leistungsanforderungen, Prüfverfahren und geforderte Prüfergebnisse

Equipements et systèmes de navigation et de radiocommunication maritimes - Systèmes d'identification automatique (AIS) - Partie 2: Stations AIS AtoN Exigences minimales opérationnelles et de performance, méthodes de mesure et résultats de test minimum attendus

Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Sistemi za avtomatično identifikacijo (AIS) - 2. del: Postaje AIS AtoN (pomoč pri navigaciji) - Minimalne zahteve za obratovanje in lastnosti, preskusne metode in zahtevani rezultati preskušanj (IEC 62320-2:2008)

General Information

• Status: Withdrawn
• Publication Date: 27-May-2008
• Withdrawal Date: 31-Mar-2011
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: CLC/SR 80 - Maritime navigation and radiocommunication equipment and systems
• Drafting Committee: IEC/TC 80 - IEC_TC_80
• Parallel Committee: IEC/TC 80 - IEC_TC_80
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 05-Dec-2019
• Completion Date: 05-Dec-2019
• Ref Project: SIST EN 62320-2:2008 - Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AIS AtoN Stations - Operational and performance requirements, methods of testing and required test results

Relations

• Replaced By: EN 62320-2:2017 - Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AIS AtoN Stations - Operational and performance requirements, methods of testing and required test results
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2008
3RPRUVNDQDYLJDFLMVNDLQUDGLRNRPXQLNDFLMVNDRSUHPDLQVLVWHPL6LVWHPL]D
DYWRPDWLþQRLGHQWLILNDFLMR$,6GHO3RVWDMH$,6$WR1SRPRþSULQDYLJDFLML
0LQLPDOQH]DKWHYH]DREUDWRYDQMHLQODVWQRVWLSUHVNXVQHPHWRGHLQ]DKWHYDQL
UH]XOWDWLSUHVNXãDQM,(&
Maritime navigation and radiocommunication equipment and systems - Automatic
identification system (AIS) - Part 2: AIS AtoN stations - Minimum operational and
performance requirements, methods of testing and required test results (IEC 62320-
2:2008)
Navigations- und Funkkommunikationsgeräte und -systeme für die Seeschifffahrt -
Automatische Identifikationssysteme (AIS) - Teil 2: AIS-AtoN-Stationen - Mindest-
Betriebs- und -Leistungsanforderungen, Prüfverfahren und geforderte Prüfergebnisse
(IEC 62320-2:2008)
Equipements et systèmes de navigation et de radiocommunication maritimes - Systèmes
d'identification automatique (AIS) - Partie 2: Stations AIS AtoN Exigences minimales
opérationnelles et de performance, méthodes de mesure et résultats de test minimum
attendus (CEI 62320-2:2008)
Ta slovenski standard je istoveten z: EN 62320-2:2008
ICS:
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62320-2
NORME EUROPÉENNE
May 2008
EUROPÄISCHE NORM
ICS 47.020.70
English version
Maritime navigation and radiocommunication equipment and systems -
Automatic identification system (AIS) -
Part 2: AIS AtoN Stations -
Operational and performance requirements, methods of testing
and required test results
(IEC 62320-2:2008)
Equipements et systèmes de navigation Navigations-
et de radiocommunication maritimes - und Funkkommunikationsgeräte
Systèmes d'identification automatique und -systeme für die Seeschifffahrt -
(AIS) - Automatische Identifikationssysteme (AIS) -
Partie 2: Stations AIS AtoN - Teil 2: AIS-AtoN-Stationen -
Exigences minimales opérationnelles Mindest-Betriebs-
et de performance, méthodes de mesure und -Leistungsanforderungen,
et résultats de test minimum attendus Prüfverfahren und geforderte
(CEI 62320-2:2008) Prüfergebnisse
(IEC 62320-2:2008)
This European Standard was approved by CENELEC on 2008-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62320-2:2008 E
Foreword
The text of document 80/507/FDIS, future edition 1 of IEC 62320-2, prepared by IEC TC 80, Maritime
navigation and radiocommunication equipment and systems, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 62320-2 on 2008-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62320-2:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60950 NOTE  Harmonized in EN 60950 series (modified).
IEC 61993-2 NOTE  Harmonized as EN 61993-2:2002 (not modified).
__________
- 3 - EN 62320-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60945 - Maritime navigation and radiocommunication EN 60945 2002
equipment and systems - General
requirements - Methods of testing and
required test results
1) 2)
IEC 61108-1 - Maritime navigation and radiocommunication EN 61108-1 2003
equipment and systems - Global navigation
satellite systems (GNSS) -
Part 1: Global positioning system (GPS) -
Receiver equipment - Performance standards,
methods of testing and required test results

1) 2)
IEC 61108-2 - Maritime navigation and radiocommunication EN 61108-2 1998
equipment and systems - Global navigation
satellite systems (GNSS) -
Part 2: Global navigation satellite system
(GLONASS) - Receiver equipment -
Performance standards, methods of testing
and required test results
1) 2)
IEC 61108-4 - Maritime navigation and radiocommunication EN 61108-4 2004
equipment and systems - Global navigation
satellite systems (GNSS) -
Part 4: Shipborne DGPS and DGLONASS
maritime radio beacon receiver equipment -
Performance requirements, methods of testing
and required test results
1) 2)
IEC 61162-1 - Maritime navigation and radiocommunication EN 61162-1 2008
equipment and systems - Digital interfaces -
Part 1: Single talker and multiple listeners

1) 2)
IEC 62287-1 - Maritime navigation and radiocommunication EN 62287-1 2006
equipment and systems - Class B shipborne
equipment of the automatic identification
system (AIS) -
Part 1: Carrier-sense time division multiple
access (CSTDMA) techniques
1)
ITU Radio - Table of transmitting frequencies in the VHF - -
Regulations maritime mobile band
Appendix 18
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

1)
ITU-R - Technical characteristics for an automatic - -
Recommendation identification system using time division
M.1371-3 multiple access in the VHF maritime mobile
band
1)
ITU-T - Basic parameters for the measurement of - -
Recommendation error performance at bit rates below the
O.153 primary rate
1)
IALA - The use of Automatic Identification System - -
Recommendation (AIS) in Marine Aids to Navigation
A-126
IEC 62320-2
Edition 1.0 2008-03
INTERNATIONAL
STANDARD
Maritime navigation and radiocommunication equipment and systems –
Automatic identification system (AIS) –
Part 2: AIS AtoN Stations – Operational and performance requirements,
methods of testing and required test results

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XD
ICS 47.020.70 ISBN 2-8318-9620-7

– 2 – 62320-2 © IEC:2008(E)
CONTENTS
FOREWORD.6

1 Scope.8
2 Normative references .8
3 Terms, definitions and abbreviations .9
3.1 Definitions .9
3.2 Abbreviations .9
4 Description .10
4.1 Types of AIS AtoN Stations .10
4.2 Type 1 AIS AtoN Station.11
4.2.1 Type 1 AIS AtoN Station characteristics .12
4.2.2 Capability .12
4.2.3 Type 1 AIS AtoN Station – Alternatives.12
4.3 Type 2 AIS AtoN Station.13
4.3.1 Type 2 AIS AtoN Station characteristics .14
4.3.2 Capability .14
4.3.3 Control receiver.14
4.3.4 Type 2 AIS AtoN Station – alternatives .14
4.4 Type 3 AIS AtoN Station.14
4.4.1 Type 3 AIS AtoN Station characteristics .15
4.4.2 Type 3 AIS AtoN Station capability .15
4.4.3 AIS receiver (AIS Rx) .15
4.4.4 Type 3 AIS AtoN Station – alternatives .15
4.5 Optional chaining of AIS AtoN Stations (Types 2 and 3) .16
5 Requirements for AIS AtoN Stations .17
5.1 Physical layer requirement .17
5.1.1 Transmitter requirements.17
5.1.2 Receiver requirements.19
5.1.3 Power consumption .20
5.1.4 Environmental requirements .20
5.2 Link layer requirements .20
5.2.1 AIS Messages .21
5.2.2 Synchronisation.21
5.2.3 VDL access schemes .22
5.2.4 Autonomous mode.24
5.2.5 Electronic position fix system.25
5.2.6 Built-in integrity test.26
5.3 Requirements for the configuration method .27
5.3.1 Alternative for Types 1, 2 and 3.27
5.4 Other requirements .28
5.4.1 Additional features.28
5.4.2 Manufacturer’s information .28
5.4.3 Marking and identification.29
6 Tests of AIS AtoN Stations – Method of measurement and required results.29
6.1 General .29
6.2 Test conditions.29

62320-2 © IEC:2008(E) – 3 –
6.2.1 Normal test conditions .29
6.2.2 Extreme test conditions .29
6.2.3 Standard test environment.29
6.2.4 Test signals .30
6.2.5 Arrangements for test signals applied to the receiver input .31
6.2.6 Encoder for receiver measurements .32
6.2.7 Waiver for receivers .32
6.2.8 Impedance.32
6.2.9 Artificial antenna (dummy load) .32
6.2.
...