EN IEC 62453-71:2023

Field device tool (FDT) interface specification - Part 71: OPC UA Information Model for FDT

IEC 62453-71:2023 specifies an OPC UA Information Model to represent the device information based on FDT-defined device integration.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 71: OPC UA Information Modell für FDT

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 71: Modèle d’information de l’OPC UA pour outils FDT

L’IEC 62453-71:2023 spécifie un modèle d’information de l’OPC UA pour représenter les informations des dispositifs, basé sur l’intégration du dispositif définie pour un outil FDT.

Specifikacija vmesnika orodja procesne naprave - 71. del: OPC UA informacijski model za orodje procesne naprave (IEC 62453-71:2023)

Ta del standarda IEC 62453 določa informacijski model OPC-UA, da predstavlja informacije o napravi na podlagi integracije naprave, opredeljene s FDT.

General Information

• Status: Published
• Publication Date: 07-Dec-2023
• ICS: 25.040 - Industrial automation systems
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Dec-2023
• Completion Date: 08-Dec-2023
• Ref Project: SIST EN IEC 62453-71:2024 - Field device tool (FDT) interface specification - Part 71: OPC UA Information Model for FDT (IEC 62453-71:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2024
Specifikacija vmesnika orodja procesne naprave - 71. del: OPC UA informacijski
model za orodje procesne naprave (IEC 62453-71:2023)
Field device tool (FDT) interface specification - Part 71: OPC UA Information Model for
FDT (IEC 62453-71:2023)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 71: OPC UA Information Modell
für FDT (IEC 62453-71:2023)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 71: Modèle
d’information de l’OPC UA pour outils FDT
Ta slovenski standard je istoveten z: EN IEC 62453-71:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62453-71

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 25.040
English Version
Field device tool (FDT) interface specification - Part 71: OPC UA
Information Model for FDT
(IEC 62453-71:2023)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 71:
terrain (FDT) - Partie 71: Modèle d'information de l'OPC UA OPC UA Information Modell für FDT
pour outils FDT (IEC 62453-71:2023)
(IEC 62453-71:2023)
This European Standard was approved by CENELEC on 2023-12-06. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62453-71:2023 E

European foreword
The text of document 65E/806/CDV, future edition 1 of IEC 62453-71, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-06
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-06
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62453-71:2023 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62453-1 2023 Field device tool (FDT) interface EN IEC 62453-1 —
specification - Part 1: Overview and
guidance
IEC 62453-2 2022 Field device tool (FDT) interface EN IEC 62453-2 2022
specification - Part 2: Concepts and
detailed description
IEC 62541-3 2020 OPC Unified Architecture - Part 3: Address EN IEC 62541-3 2020
Space Model
IEC 62541-5 2020 OPC Unified Architecture - Part 5: EN IEC 62541-5 2020
Information Model
IEC 62541-6 - OPC Unified Architecture - Part 6: EN IEC 62541-6 -
Mappings
IEC 62541-7 - OPC unified architecture - Part 7: Profiles EN IEC 62541-7 -
IEC 62541-8 - OPC Unified Architecture - Part 8: Data EN IEC 62541-8 -
Access
IEC 62541-100 2015 OPC Unified Architecture - Part 100: EN 62541-100 2015
Device Interface
Under preparation. Stage at time of publication: prEN IEC 62453-1:2022.
IEC 62453-71 ®
Edition 1.0 2023-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –

Part 71: OPC UA Information Model for FDT

Spécification des interfaces des outils des dispositifs de terrain (FDT) –

Partie 71: Modèle d’information de l’OPC UA pour outils FDT

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS  25.040 ISBN 978-2-8322-7619-8

– 2 – IEC 62453-71:2023 © IEC 2023
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
0.1 General . 9
0.2 Presentation of FDT . 9
0.3 Presentation of OPC Unified Architecture. 9
0.4 Presentation of OPC UA Device Integration . 10
1 Scope . 12
2 Normative references . 12
3 Terms, definitions and abbreviated terms . 12
3.1 Terms and definitions . 12
3.2 Abbreviated terms . 13
4 Conventions used in this document . 13
4.1.1 Document conventions . 13
4.1.2 Conventions for FDT methods . 13
4.1.3 Conventions for Node descriptions . 13
4.1.4 NodeIds and BrowseNames . 16
4.1.5 Common Attributes . 17
4.1.6 Graphical notation . 19
5 Concept . 20
5.1 System architecture . 20
6 FDT specific OPC UA ObjectTypes . 21
6.1 General . 21
6.2 FdtDeviceType . 21
6.3 FdtFunctionalGroupType . 23
6.4 IFdtDeviceHealthType interface . 23
6.5 IFdtSupportInfoType interface . 23
6.5.1 Overview . 23
6.6 Document types . 24
6.6.1 FdtDocumentType . 24
6.6.2 FdtDocumentFile . 24
6.6.3 FdtDocumentUrl. 25
6.7 FdtProtocolType . 25
6.8 FdtTransferServiceType . 26
6.9 FdtIoSignalInfoType . 26
7 OPC UA EventTypes . 27
7.1 Overview. 27
7.2 FdtAuditEventType . 28
7.3 FdtStartMethodEventType. 28
7.4 FdtEndMethodEventType . 28
7.5 FdtAuditWriteUpdateEventType . 29
8 OPC UA VariableTypes . 29
8.1 FdtParameter . 29
9 OPC UA DataTypes . 31
9.1 DataRefType . 31
9.2 FdtDeviceClassificationType . 31
9.3 SemanticInfoType . 32

IEC 62453-71:2023 © IEC 2023 – 3 –
9.4 Enumeration datatypes . 32
9.4.1 AlarmType . 32
9.4.2 ApplicationIdEnumeration . 33
9.4.3 ClassificationDomainId . 33
9.4.4 ClassificationId . 34
9.4.5 DocumentClassification . 36
9.4.6 FunctionExecutionResultState . 36
9.4.7 IECDatatype . 37
9.4.8 RangeType . 38
9.4.9 SignalTypeEnumeration . 38
9.4.10 SubstitutionType . 38
9.4.11 SupportedTransfer . 39
10 OPC UA ReferenceTypes – HasIOSignalRef . 39
11 Mapping of DataTypes . 40
11.1 Primitive data types – DeviceHealthEnumeration . 40
11.2 Mapping to OPC DI types .
...