EN 60874-1-1:2007

Connectors for optical fibres and cables - Part 1-1: Blank detail specification

This blank detail specification is not, by itself, a specification. It is part of the generic specification IEC 60874-1 (QC 910000). It includes a blank worksheet with instructions for preparing detail specifications.

Steckverbinder für Lichtwellenleiter und Lichtwellenleiterkabel - Teil 1-1: Vordruck für Bauartspezifikation

Connecteurs pour fibres et câbles optiques - Partie 1-1: Spécification particulière cadre

Cette spécification particulière cadre n'est pas, en soi, une spécification. Elle fait partie de la spécification générique CEI 60874-1 (QC 910000). Elle comprend un modèle cadre avec les instructions pour préparer les spécifications particulières.

Konektorji za optična vlakna in kable – 1-1. del: Okvirna podrobna specifikacija (IEC 60874-1-1:2006)

General Information

• Status: Withdrawn
• Publication Date: 25-Jan-2007
• Withdrawal Date: 31-Oct-2009
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2013
• Completion Date: 01-Sep-2013
• Ref Project: SIST EN 60874-1-1:2007 - Connectors for optical fibres and cables -- Part 1-1: Blank detail specification

Relations

• Replaces: EN 186001:1993 - Blank Detail Specification: Connectors for optical fibres and cables - Environmental category I
• Effective Date: 29-Jan-2023
• Replaces: EN 186003:1993 - Blank Detail Specification: Connectors for optical fibres and cables - Environmental category III
• Effective Date: 29-Jan-2023
• Replaces: EN 186002:1993 - Blank Detail Specification: Connectors for optical fibres and cables - Environmental category II
• Effective Date: 29-Jan-2023
• Replaces: EN 186006-1:1995 - Blank Detail Specification: Connectors for optical fibres and cables for military use - Environmental category VI
• Effective Date: 29-Jan-2023
• Replaces: EN 186005:1993 - Blank Detail Specification: Connectors for optical fibres and cables - Environmental category V
• Effective Date: 29-Jan-2023
• Replaces: EN 186004:1993 - Blank Detail Specification: Connectors for optical fibres and cables - Environmental category IV
• Effective Date: 29-Jan-2023
• Replaced By: EN 60874-1-1:2012 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2007
1DGRPHãþD
SIST EN 186001:1999
SIST EN 186002:2004
SIST EN 186003:2004
SIST EN 186004:2004
SIST EN 186005:2004
SIST EN 186006-1:1999
.RQHNWRUML]DRSWLþQDYODNQDLQNDEOH±GHO2NYLUQDSRGUREQDVSHFLILNDFLMD
,(&
Connectors for optical fibres and cables -- Part 1-1: Blank detail specification (IEC 60874
-1-1:2006)
Steckverbinder für Lichtwellenleiter und Lichtwellenleiterkabel - Teil 1-1: Vordruck für
Bauartspezifikation (IEC 60874-1-1:2006)
Connecteurs pour fibres et câbles optiques -- Partie 1-1: Spécification particuliere cadre
(IEC 60874-1-1:2006)
Ta slovenski standard je istoveten z: EN 60874-1-1:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60874-1-1
NORME EUROPÉENNE
January 2007
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 186001:1993, EN 186002:1993, EN 186003:1993, EN 186004:1993,
EN 186005:1993 and EN 186006-1:1995

English version
Connectors for optical fibres and cables -
Part 1-1: Blank detail specification
(IEC 60874-1-1:2006)
Connecteurs pour fibres  Steckverbinder für Lichtwellenleiter
et câbles optiques - und Lichtwellenleiterkabel -
Partie 1-1: Spécification particulière cadre Teil 1-1: Vordruck für Bauartspezifikation
(CEI 60874-1-1:2006) (IEC 60874-1-1:2006)

This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60874-1-1:2007 E
Foreword
The text of document 86B/2367/FDIS, future edition 2 of IEC 60874-1-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 60874-1-1 on 2006-11-01.
This European Standard supersedes EN 186001:1993, EN 186002:1993, EN 186003:1993,
EN 186004:1993, EN 186005:1993 and EN 186006-1:1995.
The references to clauses or subclauses of IEC 60874-1 indicated in this Part 1-1 apply to
IEC 60874-1:2006.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
__________
Endorsement notice
The text of the International Standard IEC 60874-1-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________
NORME CEI
INTERNATIONALE
IEC
60874-1-1
INTERNATIONAL
QC 910001 to QC 910006
QC 910001 à QC 910006
STANDARD
et/and QC 910099
Deuxième édition
Second edition
2006-10
Connecteurs pour fibres et câbles optiques –
Partie 1-1:
Spécification particulière cadre

Connectors for optical fibres and cables –
Part 1-1:
Blank detail specification
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60874-1-1 © IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope.11
2 Qualification approval.11
2.1 Procedure .11
2.2 Test schedule and performance requirements .11
3 Quality conformance inspection .11
3.1 Lot-by-lot inspection .11
3.2 Periodic inspection .11
4 Detail specification worksheet .11

Table 1 – Fixed sample test schedule for qualification approval [14] .19
Table 2 – Lot-by-lot quality conformance inspection schedule groups A and B [15] .21
Table 3 – Periodic quality conformance inspection schedule groups C and D [16].21
Table 4 – Details, measurements and performance requirements [17] .23

60874-1-1 © IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR OPTICAL FIBRES AND CABLES –

Part 1-1: Blank detail specification

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60874 has been prepared by sub-committee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition published in 1994. It constitutes a
technical revision. Specific technical changes since the first edition include the deletion of the
environmental categories from the whole standard.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2367/FDIS 86B/X2409/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

60874-1-1 © IEC:2006 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The QC numbers that appear on the front cover of this publication are the specification
numbers in the IEC Quality Assessment System for Electronic Components (IECQ).
The references to clauses or subclauses of IEC 60874-1 indicated in this Part 1-1 apply to the
fifth edition of IEC 60874-1.
IEC 60874 consists of the following parts, under the general title Connectors for optical fibres
and cables:
Part 1: Generic specification
Part 1-1: Blank detail specification – Environmental categories
Part 10-1: Detail specification for fibre optic connector type BFOC/2,5 terminated to
multimode fibre type A1
Part 10-2: Detail specification for fibre optic connector type BFOC/2,5 terminated to
single-mode fibre type B1
Part 10-3: Detail specification for fibre optic adaptor type BFOC/2,5 for single and
multimode fibre
Part 14-1: Detail specification for fibre optic connector type SC/PC standard terminated to
multimode fibre type A1a, A1b
Part 14-2: Detail specification for fibre optic connector type SC/PC tuned terminated to
single-mode fibre type B1
Part 14-3: Detail specification for fibre optic adaptor (simplex) type SC for single-mode
fibre
Part 14-4: Detail specification for fibre optic adaptor (simplex) type SC for multi-mode
fibre
Part 14-5: Detail specification for fibre optic connector type SC-PC untuned terminated to
single-mode fibre type B1
Part 14-6: Detail specification for fibre optic connector - Type SC-APC 9° untuned
terminated to single-mode fibre Type B1
Part 14-7: Detail specification for fibre optic connector type SC-APC 9° tuned terminated
to single-mode fibre Type B1
Part 14-9: Fibre optic connector type SC-APC tuned 8° terminated on single mode fibre
type B1 – Detail specification
Part 14-10: Fibre optic pigtail or patch cord connector type SC-APC untuned 8° terminated
on single mode fibre type B1 – Detail specification
Part 17: Sectional specification for fibre optic connector – Type F-05 (friction lock)
Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex)
Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard
terminated on multimode fibre type A1a, A1b – Detail specification
Part 19-2: Fibre optic adaptor (duplex) type SC for single-mode fibre connectors – Detail
specification
Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors – Detail
specification
60874-1-1 © IEC:2006 – 9 –
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
60874-1-1 © IEC:2006 – 11 –
CONNECTORS FOR OPTICAL FIBRES AND CABLES –

Part 1-1: Blank detail specification

1 Scope
This blank detail specification is not, by itself, a specification. It is part of the generic
specification IEC 60874-1 (QC 910000). It includes:
– a blank worksheet with instructions for preparing detail specifications.
2 Qualification approval
2.1 Procedure
The detail specification shall state the qualification approval procedure to be used (see 5.3 of
IEC 60874-1) (QC 910000).
2.2 Test schedule and performance requirements
The mandatory test schedules for qualification by the fixed sample procedure are defined in
Table 1 of
...