EN IEC 62246-1-1:2018
(Main)Reed switches - Part 1-1: Generic specification - Blank detail specification
Reed switches - Part 1-1: Generic specification - Blank detail specification
IEC 62246-1-1:2018 is a blank detail specification which defines requirements and tests for reed switches for use in general and industrial applications. This document is intended to be used in conjunction with IEC 62246-1:2015 and specific products standards applying as switching elements. This document selects from IEC 62246-1:2015 and from other sources the appropriate test procedures to be used in detail specifications derived from this specification. Reed switch types are specified depending on characteristic values including functional ratings for safety and tests. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous editions: a) update of the scope, references and terms and definitions; b) inclusion of guidelines for the preparation of blank detail and detail specifications; c) update of characteristics values including functional ratings for safety; d) update of the quality conformance inspection procedures; e) update of typical applications.
Reedschalter - Teil 1-1: Fachgrundspezifikation - Vordruck für Bauartspezifikation
Contacts à lames souples - Partie 1-1: Spécification générique - Spécification particulière-cadre
L'IEC 62246-1-1:2018 est une spécification particulière-cadre qui définit les exigences et les essais des contacts à lames souples utilisables dans les applications générales et industrielles. Le présent document est destiné à être utilisé conjointement avec l’IEC 62246-1:2015 et des normes de produits spécifiques qui s’appliquent comme des éléments de commutation. Le présent document sélectionne dans l’IEC 62246-1:2015 et dans d'autres sources les procédures d'essai appropriées à utiliser dans le cadre des spécifications particulières dérivées de la présente spécification. Les types de contact à lames souples sont spécifiés en fonction des valeurs caractéristiques, y compris les valeurs assignées de fonctionnement pour la sécurité et les essais. Cette deuxième édition annule et remplace la première édition parue en 2013. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport aux éditions précédentes: a) mise à jour du domaine d’application, des références et des termes et définitions; b) inclusion de lignes directrices pour l’élaboration des spécifications particulières-cadres et des spécifications particulières; c) mise à jour des valeurs caractéristiques dont les valeurs assignées de fonctionnement pour la sécurité; d) mise à jour des procédures de contrôle de conformité de la qualité; e) mise à jour d’applications types.
Stikala reed - 1-1. del: Rodovna specifikacija - Okvirna podrobna specifikacija
Ta del standarda IEC 62246, ki je okvirna podrobna specifikacija, opredeljuje zahteve in preskuse stikal reed za splošno in industrijsko uporabo.
Ta dokument je namenjen za uporabo skupaj s standardom IEC 62246-1:2015 in določenimi standardi za proizvode, ki se uporabljajo kot stikalni elementi.
Ta dokument izbere iz standarda IEC 62246-1:2015 in drugih virov ustrezne preskusne postopke za uporabo v podrobnih specifikacijah, ki izhajajo iz te specifikacije.
Vrste stikal reed so določene glede na karakteristične vrednosti, ki vključujejo ocene funkcionalnosti za varnost in preskuse.
OPOMBA: Stikala reed z živim srebrom niso obravnavana v tem dokumentu zaradi njihovega možnega vpliva na okolje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62246-1-1:2018
01-oktober-2018
1DGRPHãþD
SIST EN 62246-1-1:2013
Stikala reed - 1-1. del: Rodovna specifikacija - Okvirna podrobna specifikacija
Reed switches - Part 1-1: Generic specification - Blank detail specification
Reedschalter - Teil 1-1: Fachgrundspezifikation - Qualitätsbewertung
Contacts à lames souples - Partie 1-1: Spécification générique - Evaluation de qualité
Ta slovenski standard je istoveten z: EN IEC 62246-1-1:2018
ICS:
29.120.40 Stikala Switches
SIST EN IEC 62246-1-1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62246-1-1:2018
---------------------- Page: 2 ----------------------
SIST EN IEC 62246-1-1:2018
EUROPEAN STANDARD EN IEC 62246-1-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2018
ICS 29.120.70 Supersedes EN 62246-1-1:2013
English Version
Reed switches - Part 1-1: Generic specification - Blank detail
specification
(IEC 62246-1-1:2018)
Contacts à lames souples - Partie 1-1: Spécification Reedschalter - Teil 1-1: Fachgrundspezifikation - Vordruck
générique - Spécification particulière-cadre für Bauartspezifikation
(IEC 62246-1-1:2018) (IEC 62246-1-1:2018)
This European Standard was approved by CENELEC on 2018-03-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62246-1-1:2018 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62246-1-1:2018
EN IEC 62246-1-1:2018 (E)
European foreword
The text of document 94/426/FDIS, future edition 2 of IEC 62246-1-1, prepared by IEC/TC 94 "All-or-
nothing electrical relays" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62246-1-1:2018.
The following dates are fixed:
• latest date by which the document has to be (dop) 2018-12-13
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-03-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62246-1-1:2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62246-1-1:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1:2013 NOTE Harmonized as EN 60068-1:2014 (not modified).
IEC 60068-2-1:2007 NOTE Harmonized as EN 60068-2-1:2007 (not modified).
IEC 60068-2-2:2007 NOTE Harmonized as EN 60068-2-2:2007 (not modified).
IEC 60068-2-7:1983 NOTE Harmonized as EN 60068-2-7:1993 (not modified).
IEC 60068-2-11:1981 NOTE Harmonized as EN 60068-2-11:1999 (not modified).
IEC 60068-2-13:1983 NOTE Harmonized as EN 60068-2-13:1999 (not modified).
IEC 60068-2-27:2008 NOTE Harmonized as EN 60068-2-27:2009 (not modified).
IEC 60068-2-30:2005 NOTE Harmonized as EN 60068-2-30:2005 (not modified).
IEC 60947-5-1:2017 NOTE Harmonized as EN 60947-5-1:2017 (not modified).
IEC 60947-5-2:2007 NOTE Harmonized as EN 60947-5-2:2007 (not modified).
IEC 60947-5-3:2013 NOTE Harmonized as EN 60947-5-3:2013 (not modified).
IEC 61508-4:2010 NOTE Harmonized as EN 61508-4:2010 (not modified).
IEC 61810-1:2015 NOTE Harmonized as EN 61810-1:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.