EN IEC 61169-54:2021

Radio frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ω, Series 4,3-10

IEC 61169-54:2021 is available as IEC 61169-54:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61169-54:2021 provides information and rules for the preparation of detail specifications (DS) for coaxial connectors with 10 mm inner diameter of outer conductor, characteristic impedance 50 Ω, series 4,3-10 with screw type, hand screw type or quick-lock type coupling, for an upper operating frequency limit of 6 GHz, for use in wireless telecommunication and wireless network applications in conjunction with appropriate transmission line types for these applications. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. This second edition cancels and replaces the first edition published in 2016. This edition includes the following significant technical changes with respect to the previous edition: - Table 8: some values changed.

Hochfrequenz-Steckverbinder – Teil 54: Rahmenspezifikation für koaxiale HF-Steckverbinder mit 10 mm Innendurchmesser des Außenleiters, Wellenwiderstand 50 Ω, Typ 4,3-10

Connecteurs pour fréquences radioélectriques - Partie 54: Spécification intermédiaire relative aux connecteurs coaxiaux avec diamètre intérieur du conducteur extérieur de 10 mm, impédance caractéristique nominale 50 Ω, série 4,3-10

IEC 61169-54:2021 est disponible sous forme de IEC 61169-54:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.IEC 61169-54:2021 fournit des informations et des règles en vue de l’établissement de spécifications particulières (SP) pour des connecteurs coaxiaux avec un diamètre intérieur du conducteur extérieur de 10 mm, une impédance caractéristique nominale de 50 Ω, série 4,3-10, à couplage de type à vis, manuel à vis ou à verrouillage rapide, de fréquence de fonctionnement inférieure ou égale à 6 GHz, utilisés dans des applications de télécommunication sans fil et de réseau sans fil conjointement avec des lignes de transmission appropriées destinées à ces applications.La présente spécification indique les caractéristiques de performance recommandées à prendre en considération pour rédiger une spécification particulière, et elle couvre les programmes d’essais et les exigences de contrôle pour les niveaux d’assurance qualité M et H. Cette seconde édition annule et remplace la première édition, publiée en 2016. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - Tableau 8: modification de certaines valeurs.

Radiofrekvenčni konektorji - 54. del: Področna specifikacija za koaksialne konektorje z notranjim premerom zunanjih vodnikov 10 mm in nazivno karakteristično impendanco 50 ohm, serija 4,3-10 (IEC 61169-54:2021)

General Information

• Status: Published
• Publication Date: 07-Oct-2021
• ICS: 33.120.30 - RF connectors
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Oct-2021
• Completion Date: 08-Oct-2021
• Ref Project: SIST EN IEC 61169-54:2021 - Radio frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ohms, Series 4.3-10 (IEC 61169-54:2021)

Relations

• Replaces: EN 61169-54:2016 - Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ω, series 4,3-10
• Effective Date: 12-Oct-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61169-54:2021
01-december-2021
Nadomešča:
SIST EN 61169-54:2017
Radiofrekvenčni konektorji - 54. del: Področna specifikacija za koaksialne
konektorje z notranjim premerom zunanjih vodnikov 10 mm in nazivno
karakteristično impendanco 50 ohm, serija 4,3-10 (IEC 61169-54:2021)
Radio frequency connectors - Part 54: Sectional specification for coaxial connectors with
10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ohms,
Series 4.3-10 (IEC 61169-54:2021)
Hochfrequenz-Steckverbinder – Teil 54: Rahmenspezifikation für koaxiale HF-
Steckverbinder mit 10 mm Innendurchmesser des Außenleiters, Wellenwiderstand 50 Ω,
Typ 4,3-10 (IEC 61169-54:2021)
Connecteurs pour fréquences radioélectriques - Partie 54: Spécification intermédiaire
relative aux connecteurs coaxiaux avec diamètre intérieur du conducteur extérieur de 10
mm, impédance caractéristique nominale de 50 Ohms, série 4.3-10 (IEC 61169-54:2021)
Ta slovenski standard je istoveten z: EN IEC 61169-54:2021
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
SIST EN IEC 61169-54:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61169-54:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61169-54:2021


EUROPEAN STANDARD EN IEC 61169-54

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2021
ICS 33.120.30 Supersedes EN 61169-54:2016 and all of its
amendments and corrigenda (if any)
English Version
Radio frequency connectors - Part 54: Sectional specification for
coaxial connectors with 10 mm inner diameter of outer
conductor, nominal characteristic impedance 50 Ω, Series 4,3-10
(IEC 61169-54:2021)
Connecteurs pour fréquences radioélectriques - Partie 54: Hochfrequenz-Steckverbinder - Teil 54:
Spécification intermédiaire relative aux connecteurs Rahmenspezifikation für koaxiale HF-Steckverbinder mit 10
coaxiaux avec diamètre intérieur du conducteur extérieur de mm Innendurchmesser des Außenleiters, Wellenwiderstand
10 mm, impédance caractéristique nominale 50 Ω, série 50 Ω, Typ 4,3-10
4,3-10 (IEC 61169-54:2021)
(IEC 61169-54:2021)
This European Standard was approved by CENELEC on 2021-10-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61169-54:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61169-54:2021
EN IEC 61169-54:2021 (E)
European foreword
The text of document 46F/574/FDIS, future edition 2 of IEC 61169-54, prepared by SC 46F "RF and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 61169-54:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-07-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-10-01
document have to be withdrawn
This document supersedes EN 61169-54:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
com
...