EN IEC 61169-1-4:2020
(Main)Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient
Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient
IEC 61169-1-4:2020 provides test methods for the voltage standing wave ratio, return loss and reflection coefficient of RF connectors, including frequency domain method, time domain method, and gating. This document is applicable to cable RF connectors, microstrip RF connectors and RF adapters. It is also suitable to RF channels in multi-RF channel connectors and hybrid connectors.
Hochfrequenz-Steckverbinder – Teil 1-4: Elektrische Prüfverfahren – Spannungsstehwellenverhältnis, Rückflussdämpfung und Reflexionskoeffizient
Connecteurs pour fréquences radioélectriques - Partie 1-4 : Méthodes d’essai électriques - Rapport d’ondes stationnaires en tension, affaiblissement de réflexion et coefficient de réflexion
l’IEC 61169-1-4:2020 fournit les méthodes d'essai du rapport d’ondes stationnaires en tension, de l’affaiblissement de réflexion et du coefficient de réflexion des connecteurs RF, y compris la méthode dans le domaine fréquentiel, la méthode dans le domaine temporel et le portillonnage. Le présent document s’applique aux connecteurs de câble RF, aux connecteurs RF à microruban et aux adaptateurs RF. Elle peut également s’appliquer aux canaux RF des connecteurs à canaux multi-RF et aux connecteurs hybrides.
Radiofrekvenčni konektorji - 1-4. del: Električne preskusne metode - Razmerje napetostnega stojnega vala, povratne izgube in odbojni koeficient (IEC 61169-1-4:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2020
Radiofrekvenčni konektorji - 1-4. del: Električne preskusne metode - Razmerje
napetostnega stojnega vala, povratne izgube in odbojni koeficient (IEC 61169-1-
4:2020)
Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave
ratio, return loss and reflection coefficient (IEC 61169-1-4:2020)
Hochfrequenz-Steckverbinder – Teil 1-4: Elektrische Prüfverfahren –
Spannungsstehwellenverhältnis, Rückflussdämpfung und Reflexionskoeffizient (IEC
61169-1-4:2020)
Connecteurs pour fréquences radioélectriques - Partie 1-4 : Méthodes d’essai
électriques - Rapport d’ondes stationnaires en tension, affaiblissement de réflexion et
coefficient de réflexion (IEC 61169-1-4:2020)
Ta slovenski standard je istoveten z: EN IEC 61169-1-4:2020
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61169-1-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 33.120.30
English Version
Radio-frequency connectors - Part 1-4: Electrical test methods -
Voltage standing wave ratio, return loss and reflection coefficient
(IEC 61169-1-4:2020)
Connecteurs pour fréquences radioélectriques - Partie 1-4 : Hochfrequenz-Steckverbinder - Teil 1-4: Elektrische
Méthodes d'essai électriques - Rapport d'ondes Prüfverfahren - Spannungsstehwellenverhältnis,
stationnaires en tension, affaiblissement de réflexion et Rückflussdämpfung und Reflexionskoeffizient
coefficient de réflexion (IEC 61169-1-4:2020)
(IEC 61169-1-4:2020)
This European Standard was approved by CENELEC on 2020-08-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61169-1-4:2020 E
European foreword
The text of document 46F/505/FDIS, future edition 1 of IEC 61169-1-4, prepared by SC 46F "RF and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 61169-1-4:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-12
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61169-1-4:2020 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61169-1 - Radio frequency connectors - Part 1: Generic EN 61169-1 -
specification - General requirements and
measuring methods
IEC 61169-1-4 ®
Edition 1.0 2020-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Radio-frequency connectors –
Part 1-4: Electrical test methods – Voltage standing wave ratio, return loss and
reflection coefficient
Connecteurs pour fréquences radioélectriques –
Partie -4: Méthodes d’essai électriques – Rapport d’ondes stationnaires
en tension, affaiblissement de réflexion et coefficient de réflexion
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.30 ISBN 978-2-8322-8428-5
– 2 – IEC 61169-1-4:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Preparation of test sample (DUT) . 6
4.1 Cable RF connector .6
4.2 Microstrip connector .7
4.3 Adapter .7
5 Typical graphical symbols . 7
6 Test condition . 8
7 Test methods . 8
7.1 Frequency-domain method .8
7.1.1 Test theory .8
7.1.2 Test equipment .9
7.1.3 Test procedure .9
7.2 Time-domain method . 10
7.2.1 Test theory . 10
7.2.2 Equipment . 11
7.2.3 Test procedure . 11
7.3 Gating . 12
7.3.1 Test principle . 12
7.3.2 Equipment . 12
7.3.3 Test procedure . 12
8 Failure criterion . 13
9 Information to be given in the relevant specification . 13
10 Test report . 13
Figure 1 – Dual-connector assembly test sample (DUT) . 7
Figure 2 – Illustration of signal transmission and reflection in DUT . 8
Figure 3 – S-parameter representing transmission and reflection characteristics . 8
Figure 4 – System calibration outline . 9
Figure 5 – Outline of system calibration and verification when standard test adapter is
used . 9
Figure 6 – DUT test outline . 10
Figure 7 – Standard test adaptor calibration and verification outline. 10
Figure 8 – DUT test arrangement example . 10
Figure 9 – Principle of time-domain measurement . 11
Figure 10 – The position of DUT in the system . 12
IEC 61169-1-4:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 1-4: Electrical test methods – Voltage standing wave ratio,
return loss and reflection coefficient
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or al
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.