EN 131201:2002
(Main)Blank Detail Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric
Blank Detail Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric
Supersedes CECC 31 201:1981 (with A1) * Superseded by EN 60384-16-1:2005
Vordruck für Bauartspezifikation: Festkondensatoren mit metallisierten Polypropylenfolien als Dielektrikum
Spécification particulière cadre: Condensateurs fixes à électrodes métallisés et à diélectrique en polypropylène
Blank detail specification: Fixed capacitors with metallized electrodes and polypropylene dielectric
General Information
Relations
Standards Content (Sample)
STANDARDBlank detail specification: Fixed capacitors with metallized electrodes and polypropylene dielectric©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 131201:2004(en)ICS31.060.10
EUROPEAN STANDARDEN 131201NORME EUROPÉENNEEUROPÄISCHE NORMMay 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 131201:2002 EICS 31.060.30Supersedes CECC 31 201:1981English versionBlank Detail Specification:Fixed capacitors with metallized electrodesand polypropylene dielectricSpécification particulière cadre:Condensateurs fixes à électrodesmétallisés et à diélectrique enpolypropylèneVordruck für Bauartspezifikation:Festkondensatoren mit metallisiertenPolypropylenfolien als DielektrikumThis European Standard was approved by CENELEC on 1992-10-14. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thisEuropean Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in anyother language made by translation under the responsibility of a CENELEC member into its ownlanguage and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
- 3 -EN 131201:2002Identification of the detail specification (DS) and the componentThe first page of the DS should have the following layout. The numbers in square bracketscorrespond to the indications to be completed thereunder.[1]The name of the National Standards Organization under whose authority the DS is publishedand, if applicable, the organization from whom the DS is available.[2]The CECC symbol and the number allotted to the DS by the CECC General Secretariat.[3]The number and issue number of the specification as relevant; also national reference ifdifferent.[4]If different from the CECC number, the national number of the DS, date of issue and anyfurther information required by the national system, together with any amendment numbers.[5]A brief description of the type of capacitor.[6]Information on typical construction (see examples in the form below).For [5] and [6] the text to be given in the DS should be suitable for any entry in the Register of firms,products and services approved under the CECC system (Register of approvals), CECC 00200, andthe Register of national documents implementing CECC publications and CECC European standards,CECC 00300.[7]An outline drawing with main dimensions which are of importance for interchangeability,and/or reference to the appropriate national or international document for outlines.[8]Quick reference data (see examples in the form below) and level(s) of quality assessmentcovered by the DS.[9]Circuit diagram (if applicable).
- 5 -EN 131201:20021
General data1.1 Method of mounting for vibration and bump or shock testsThe method shall be specified in the detail specification. See 1.3.3 of EN 131200:2002.1.2 DimensionsDimensions shall be specified in Table 1, unless there is no case size reference, when table 1 may beomitted and the dimensions shall be given in table 2, which then becomes table 1.Table 1 - DimensionsCase sizeDimensions1) (mm)Reference1)max.Lmax.Hmax.d ± tol.2)2)1.3 Ratings and characteristicsThe following ratings and characteristics shall be specified in the DS:— performance grade— stability grade (if applicable)— capacitance range(See Table 2)— tolerance on rated capacitance— rated voltage(See Table 2)— category voltage (if applicable)(See Table 2)— rated temperature— tangent of loss angle— insulation resistance— vibration severity— climatic category— bump severity (if applicable)— shock severity (if applicable)NOTE
Information on the above characteristics may be given in tabular form, if necessary.Table 2 - Values of capacitance and of voltage related to case sizesRated voltage (V)Category voltage1)Rated capacitance1) If different fr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.