iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61987-11:2012

(Main)

Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Generic structures

Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Generic structures

IEC 61987-11:2012(E) provides a characterisation of industrial process measuring equipment (device type dictionary) for integration in the Component Data Dictionary (CDD), and generic structures for Operating Lists of Properties (OLOPs) and Device Lists of Properties (DLOPs) of measuring equipment in conformance with IEC 61987-10.

Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten (ML) für Messgeräte für den elektronischen Datenaustausch - Allgemeine Strukturen

Mesure et contrôle des processus industriels - Structures de données et éléments dans les catalogues d'équipement de processus - Partie 11: Liste de propriétés (LOP) des équipements de mesure pour l'échange électronique de données - Structures génériques

L'IEC 61987-11:2012 fournit une caractérisation des équipements de mesure de processus industriels (dictionnaire des types de dispositifs) pour l'intégration dans le dictionnaire de données de composants (CDD, en anglais "Component Data Dictionary") et des structures génériques pour les listes de propriétés fonctionnelles (OLOP, en anglais "Operating List of Properties") et les listes de propriétés des dispositifs de mesure (DLOP, en anglais "Device List of Properties") en conformité avec la CEI 61987-10. La présente version bilingue (2014-01) correspond à la version anglaise monolingue publiée en 2012-07.

Meritve in krmiljenje industrijskih procesov - Strukture podatkov in elementi v katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za elektronsko izmenjavo podatkov - Rodovne strukture (IEC 61987-11:2012)

Ta del standarda IEC 61987 zagotavlja – karakterizacijo merilne opreme za industrijske procese (slovar tipov naprav) za integracijo v slovar podatkov o komponentah (CDD) in – rodovne strukture operativnih seznamov lastnosti (OLOP) in seznamov lastnosti naprav (DLOP) za merilno opremo v skladu z IEC 61987-10. Rodovne strukture za OLOP in DLOP vsebujejo najpomembnejše bloke za procesno merilno opremo. Bloki, ki se nanašajo na določeno vrsto opreme, bodo opisani v ustreznem delu serije IEC 61987 (na primer IEC 61987-12, merilniki pretoka). Lastnosti opreme, ki niso obravnavane v tem delu serije, na primer OLOP in DLOP za merilnike pretoka, skupaj z bloki in lastnostmi, bo mogoče najti v prihodnjih delih IEC 61987-12.

General Information

Status
Withdrawn
Publication Date
20-Sep-2012
Withdrawal Date
27-Aug-2015
ICS
25.040.40 - Industrial process measurement and control
35.100.20 - Data link layer
Technical Committee
CLC/TC 65X - Industrial-process measurement, control and automation
Drafting Committee
IEC/SC 65E - IEC_SC_65E
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
21-Apr-2020
Completion Date
21-Apr-2020
Ref Project
SIST EN 61987-11:2012 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: Lists of properties (LOP) of measuring equipment for electronic data exchange - Generic structures (IEC 61987-11:2012)

Relations

Replaced By
EN 61987-11:2017 - Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures
Effective Date
25-Jan-2023

Buy Standard

EN 61987-11:2012EN 61987-11:2012
PreviousNext
Standard
EN 61987-11:2012
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61987-11:2012
01-november-2012
Meritve in krmiljenje industrijskih procesov - Strukture podatkov in elementi v
katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za
elektronsko izmenjavo podatkov - Rodovne strukture (IEC 61987-11:2012)
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 11: Lists of properties (LOP) of measuring equipment for
electronic data exchange - Generic structures (IEC 61987-11:2012)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 11: Merkmalleisten für Messgeräte für elektronischen
Datenaustausch – Allgemeine Strukturen (IEC 61987-11:2012)
Mesure et contrôle des processus industriels - Structures de données et éléments dans
les catalogues d'équipement de processus - Partie 11: Liste de propriétés (LOP) des
équipements de mesure pour l'échange électronique de données - Structures
génériques (CEI 61987-11:2012)
Ta slovenski standard je istoveten z: EN 61987-11:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61987-11:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61987-11:2012

---------------------- Page: 2 ----------------------

SIST EN 61987-11:2012

EUROPEAN STANDARD
EN 61987-11

NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.20


English version


Industrial-process measurement and control -
Data structures and elements in process equipment catalogues -
Part 11: List of Properties (LOP) of measuring equipment for electronic
data exchange - Generic structures
(IEC 61987-11:2012)


Mesure et contrôle des processus  Industrielle Leittechnik -
industriels - Datenstrukturen und -elemente in
Structures de données et éléments dans les Katalogen der Prozessleittechnik -
catalogues d'équipement de processus - Teil 11: Merkmalleisten (ML) für
Partie 11: Liste de propriétés (LOP) Messgeräte für den elektronischen
des équipements de mesure pour l'échange Datenaustausch - Allgemeine Strukturen
électronique de données - (IEC 61987-11:2012)
Structures génériques
(CEI 61987-11:2012)



This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61987-11:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61987-11:2012
EN 61987-11:2012 - 2 -
Foreword
The text of document 65E/245/FDIS, future edition 1 of IEC 61987-11, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61987-11:2012.

The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61158-4-24:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elements
SIST EN IEC 61158-4-24:2023

IEC 61158-4-24:2023 provides procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed datalink service provider; procedures for giving communications opportunities to all participating DL-entities (DLEs), sequentially and in a cyclic manner for deterministic and synchronized transfer at cyclic intervals up to 64 ms; procedures for giving communication opportunities available for time-critical data transmission together with non-time-critical data transmission without prejudice to the time-critical data transmission; procedures for giving cyclic and acyclic communication opportunities for time-critical data transmission with prioritized access; procedures for giving communication opportunities based on ISO/IEC/IEEE 8802‑3 medium access control, with provisions for nodes to be added or removed during normal operation; the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this document, and their representation as physical interface data units.

  • Standard
    138 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-4-21:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 elements
SIST EN IEC 61158-4-21:2023

IEC 61158-4-21:2023 describes: procedures for the timely transfer of data and control information from one data link user entity to a peer user entity, and among the data link entities forming the distributed data link service provider; procedures for giving communication opportunities based on ISO/IEC/IEEE 8802‑3 MAC, with provisions for nodes to be added or removed during normal operation; structure of the fieldbus data link protocol data units (DLPDUs) used for the transfer of data and control information by the protocol of this document, and their representation as physical interface data units.

  • Standard
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-4-4:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements
SIST EN IEC 61158-4-4:2024

IEC 61158-4-4:2023 specifies - procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider; - the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this document, and their representation as physical interface data units.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-3-24:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elements
SIST EN IEC 61158-3-24:2023

IEC 61158-3-24:2023 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time-window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This document defines in an abstract way the externally visible service provided by the Type 24 fieldbus data-link layer in terms of the primitive actions and events of the service; the interrelationship between these actions and events, and their valid sequences; the parameters associated with each primitive action and event, and the form which they take.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-3-4:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements
SIST EN IEC 61158-3-4:2023

IEC 61158-3-4:2023 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This document defines in an abstract way the externally visible services provided by the Type 4 fieldbus data-link layer in terms of the primitive actions and events of the services; the parameters associated with each primitive action and event, and the form which they take; and the interrelationship between these actions and events, and their valid sequences. The purpose of this document is to define the services provided to the Type 4 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model; systems management at the boundary between the data-link layer and systems management of the fieldbus reference model.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-2:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
SIST EN IEC 61158-2:2024

IEC 61158-2:2023 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the "three-layer" fieldbus reference model described in IEC 61158‑1.

  • Standard
    546 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-3-2:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements
SIST EN IEC 61158-3-2:2023

IEC 61158-3-2:2023 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the "three-layer" fieldbus reference model described in IEC 61158‑1. Throughout the set of fieldbus standards, the term "service" refers to the abstract capability provided by one layer of the OSI Basic Reference Model to the layer immediately above. Thus, the data-link layer service defined in this document is a conceptual architectural service, independent of administrative and implementation divisions.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-4-2:2023(Main)
Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements
SIST EN IEC 61158-4-2:2023

IEC 61158-4-2:2023 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the "three-layer" fieldbus reference model described in IEC 61158‑1. The data-link protocol provides the data-link service by making use of the services available from the physical layer. The primary aim of this document is to provide a set of rules for communication expressed in terms of the procedures to be carried out by peer data-link entities (DLEs) at the time of communication. These rules for communication are intended to provide a sound basis for development in order to serve a variety of purposes: - as a guide for implementers and designers; - for use in the testing and procurement of equipment; - as part of an agreement for the admittance of systems into the open systems environment; - as a refinement to the understanding of time-critical communications within OSI.

  • Standard
    405 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-4-19:2019(Main)
Industrial communication networks - Fieldbus specifications - Part 4 -19: Data-link layer protocol specification - Type 19 elements
SIST EN IEC 61158-4-19:2019

IEC 61158-4-19:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. The main changes are: •improving the hotplug and redundancy features; •improving the phase switching and the error handling; •editorial improvements

  • Standard
    480 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    480 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61158-4-2:2019(Main)
Industrial communication networks - Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elements
SIST EN IEC 61158-4-2:2019

IEC 61158-4-2:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This fourth edition cancels and replaces the third edition published in 2014 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: •clarifications of ControlNet object in 7.2; •extensions and clarifications of TCP/IP interface object in 7.5; •extensions and clarifications of Ethernet Link object in 7.6; •clarifications of DeviceNet object in 7.7; •extensions and clarifications of CCO object in 7.8; •extensions and clarifications of DLR object in 7.9; •extensions and clarifications of Port object in 7.11; •addition of PRP/HSR Protocol and PRP/HSR Nodes Table objects in 7.12 and 7.13; •extensions and clarifications of DLR protocol in Clause 10; •addition of PRP/HSR protocol mapping in Clause 11; •update of indicator behaviour in A.2.2 and A.2.4; •miscellaneous editorial corrections.

  • Standard
    385 pages
    English language
    sale 10% off
    e-Library read for
    1 day