EN 61987-11:2017

Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures

IEC 61987-11:2012(E) provides a characterisation of industrial process measuring equipment (device type dictionary) for integration in the Component Data Dictionary (CDD), and generic structures for Operating Lists of Properties (OLOPs) and Device Lists of Properties (DLOPs) of measuring equipment in conformance with IEC 61987-10.

Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten (ML) für Messgeräte für den elektronischen Datenaustausch - Allgemeine Strukturen

Mesure et commande des processus industriels - Structures de données et éléments dans les catalogues d'équipement de processus - Partie 11: Listes des propriétés (LOP) d'équipements de mesure pour l'échange électronique de données - Structures génériques

L'IEC 61987-11:2012 fournit une caractérisation des équipements de mesure de processus industriels (dictionnaire des types de dispositifs) pour l'intégration dans le dictionnaire de données de composants (CDD, en anglais "Component Data Dictionary") et des structures génériques pour les listes de propriétés fonctionnelles (OLOP, en anglais "Operating List of Properties") et les listes de propriétés des dispositifs de mesure (DLOP, en anglais "Device List of Properties") en conformité avec la CEI 61987-10. La présente version bilingue (2014-01) correspond à la version anglaise monolingue publiée en 2012-07.

Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za elektronsko izmenjavo podatkov - Splošne strukture (IEC 61987-11:2016)

Standard 61987-11:2012(E) zagotavlja karakterizacijo merilne opreme za industrijske procese (slovar tipov naprav) za integracijo v slovar podatkov o komponentah (CDD) ter splošne strukture operativnih seznamov lastnosti (OLOP) in seznamov lastnosti naprav (DLOP) za merilno opremo v skladu s standardom IEC 61987-10.

General Information

• Status: Published
• Publication Date: 20-Apr-2017
• Withdrawal Date: 20-Apr-2020
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.20 - Data link layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-Apr-2017
• Completion Date: 21-Apr-2017
• Ref Project: SIST EN 61987-11:2017 - Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures (IEC 61987-11:2016)

Relations

• Replaces: EN 61987-11:2012 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Generic structures
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2017
1DGRPHãþD
SIST EN 61987-11:2012
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v
katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za
elektronsko izmenjavo podatkov - Splošne strukture (IEC 61987-11:2016)
Industrial-process measurement and control - Data structures and elements in -process
equipment catalogues - Part 11: Lists of properties (LOPs) of measuring equipment for
electronic data exchange - Generic structures (IEC 61987-11:2016)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 11: Merkmalleisten (ML) für Messgeräte für den elektronischen
Datenaustausch - Allgemeine Strukturen (IEC 61987-11:2016)
Mesure et commande des processus industriels - Structures de données et éléments
dans les catalogues d'équipement de processus - Partie 11: Listes des propriétés (LOP)
d'équipements de mesure pour l'échange électronique de données - Structures
génériques (IEC 61987-11:2016)
Ta slovenski standard je istoveten z: EN 61987-11:2017
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61987-11

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 25.040.40; 35.100.20 Supersedes EN 61987-11:2012
English Version
Industrial-process measurement and control - Data structures
and elements in -process equipment catalogues - Part 11: Lists
of properties (LOPs) of measuring equipment for electronic data
exchange - Generic structures
(IEC 61987-11:2016)
Mesure et commande des processus industriels - Industrielle Leittechnik - Datenstrukturen und -elemente in
Structures de données et éléments dans les catalogues Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten
d'équipement de processus - Partie 11: Listes des (ML) für Messgeräte für den elektronischen
propriétés (LOP) d'équipements de mesure pour l'échange Datenaustausch - Allgemeine Strukturen
électronique de données - Structures génériques (IEC 61987-11:2016)
(IEC 61987-11:2016)
This European Standard was approved by CENELEC on 2017-01-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61987-11:2017 E
European foreword
The text of document 65E/467/CDV, future edition 2 of IEC 61987-11, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2017-10-21
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-04-21
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61987-11:2012.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61987-11:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60770-1:2010 NOTE Harmonized as EN 60770-1:2011
IEC 61360-1:2009 NOTE Harmonized as EN 61360-1:2010
IEC 61360-2 NOTE Harmonized as EN 61360-2
IEC 61987-12 NOTE Harmonized as EN 61987-12
IEC 81346-1:2009 NOTE Harmonized as EN 81346-1:2009
ISO 10303 (Series) NOTE Harmonized as ENV 10303 (Series)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60947-5-6 -  Low-voltage switchgear and controlgear -- EN 60947-5-6 -
Part 5-6: Control circuit devices and
switching elements - DC interface for
proximity sensors and switching amplifiers
(NAMUR)
IEC 61069-5 -  Industrial-process measurement, control EN 61069-5 -
and automation - Evaluation of system
properties for the purpose of system
assessment - Part 5: Assessment of
system dependability
IEC 61508-6 -  Functional safety of EN 61508-6 -
electrical/electronic/programmable
electronic safety-related systems -- Part 6:
Guidelines on the application of IEC
61508-2 and IEC 61508-3
IEC 61987-1 2006 Industrial-process measurement and EN 61987-1 2007
control - Data structures and elements in
process equipment catalogues -- Part 1:
Measuring equipment with analogue and
digital output
IEC 61987-10 2009 Industrial-process measurement and EN 61987-10 2009
control - Data structures and elements in
process equipment catalogues - Part 10:
Lists of Properties (LOPs) for Industrial-
Process Measurement and Control for
Electronic Data Exchange - Fundamentals
- -  + AC 2011
IEC 61987-92 -  - -
IEC 62424 -  Representation of process control EN 62424 -
engineering - Requests in P&I diagrams
and data exchange between P&ID tools
and PCE-CAE tools
IEC 61987-11 ®
Edition 2.0 2016-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial-process measurement and control – Data structures and elements in

process equipment catalogues –

Part 11: Lists of properties (LOPs) of measuring equipment for electronic data

exchange – Generic structures
Mesure et commande des processus industriels – Structures de données et

éléments dans les catalogues d'équipement de processus –

Partie 11: Listes des propriétés (LOP) d'équipements de mesure pour l'échange

électronique de données– Structures génériques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.20 ISBN 978-2-8322-3692-5

– 2 – IEC 61987-11:2016 © IEC 2016
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
3.1 Terms and definitions concerning measuring instruments . 10
3.2 Terms and definitions concerning relationships . 11
4 General . 13
4.1 Characterization scheme. 13
4.2 Aspects . 13
4.3 Rules for the construction of LOPs with block structure . 15
4.3.1 Block order . 15
4.3.2 Position of cardinality properties . 15
4.3.3 Naming of blocks created by cardinality . 15
4.3.4 Characterizing property . 15
4.3.5 Validity . 15
4.4 OLOP and DLOP . 15
4.5 Operating conditions . 16
4.6 Measuring equipment configuration . 17
5 Operating list of properties (OLOP) . 18
5.1 Generic block structure . 18
5.2 Base conditions . 19
5.3 Process case . 19
5.3.1 General . 19
5.3.2 Process case variables . 19
5.3.3 Other process case variable . 20
5.4 Operating conditions for device design. 20
5.4.1 General . 20
5.4.2 Installation design conditions . 20
5.4.3 Environmental design conditions. 20
5.4.4 Process design conditions . 21
5.4.5 Pressure-temperature design conditions . 21
5.5 Process equipment . 22
5.5.1 General . 22
5.5.2 Line or nozzle . 22
5.6 Physical location . 22
5.6.1 General . 22
5.6.2 Available power supply . 22
5.6.3 Process criticality classification . 23
5.6.4 Area classification . 23
6 Device list of properties (DLOP) . 23
6.1 General . 23
6.1.1 Generic block structure . 23
6.1.2 Relationship to IEC 61987-1 . 25
6.1.3 Multivariable devices . 25
6.2 Identification . 26

IEC 61987-11:2016 © IEC 20
...