Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal currents

This European Standard gives to the user guidance to determine the loadability of an oil-immersed distribution transformer, as defined in and covered by EN 50464-1, in the case of load current with harmonic factors exceeding the maximum values allowed. NOTE In general this document is also applicable to dry-type distribution transformers as defined in and covered by HD 538.

Ölgefüllte Drehstrom-Verteilungstransformatoren 50 Hz, 50 kVA bis 2 500 kVA, mit einer höchsten Spannung für Betriebsmittel bis 36 kV - Teil 3: Bestimmung der Bemessungsleistung eines Transformators bei nichtsinusförmigen Lastströmen

Diese Europäische Norm gibt für Anwender eine Anleitung, die Belastbarkeit eines ölgefüllten Drehstrom-Verteilungstransformators entsprechend EN 50464-1 für den Fall zu bestimmen, dass die Oberschwingungsanteile des Laststroms die Höchstwerte überschreiten. ANMERKUNG Grundsätzlich ist dieses Dokument auch auf Trockentransformatoren entsprechend HD 538 anwendbar.

Transformateurs triphasés de distribution immergés dans l'huile, 50 Hz, de 50 kVA à 2 500 kVA, de tension la plus élevée pour le matériel ne dépassant pas 36 kV - Partie 3: Détermination de la caractéristique de puissance d'un transformateur avec des courants de charge non sinusoïdaux

La présente Norme Européenne donne à l'utilisateur des informations pour déterminer la possibilité de charge d'un transformateur de distribution immergé dans l'huile, tel que défini et couvert par la EN 50464-1, dans le cas de courants de charge dont les taux d'harmoniques dépassent les valeurs maximales admises. NOTE En général le présent document est également applicable aux transformateurs de distribution de type sec, tel que définis et couverts par le HD 538.

Trifazni oljni distribucijski transformatorji, 50 Hz, od 50 kVA do 2 500 kVA in najvišja napetost naprave do 36 kV - 3. del: Ugotavljanje močnostne zmogljivosti transformatorja, obremenjenega z nesinusnimi tokovi

General Information

Status
Withdrawn
Publication Date
19-Apr-2007
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-May-2017

Relations

Buy Standard

Standard
EN 50464-3:2007
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50464-3:2007
01-december-2007
1DGRPHãþD
SIST HD 428.4 S1:1997
7ULID]QLROMQLGLVWULEXFLMVNLWUDQVIRUPDWRUML+]RGN9$GRN9$LQ
QDMYLãMDQDSHWRVWQDSUDYHGRN9±GHO8JRWDYOMDQMHPRþQRVWQH]PRJOMLYRVWL
WUDQVIRUPDWRUMDREUHPHQMHQHJD]QHVLQXVQLPLWRNRYL
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA
with highest voltage for equipment not exceeding 36 kV -- Part 3: Determination of the
power rating of a transformer loaded with non-sinusoidal currents
Ölgefüllte Drehstrom-Verteilungstransformatoren 50 Hz, 50 kVA bis 2 500 kVA, mit einer
höchsten Spannung für Betriebsmittel bis 36 kV - Teil 3: Bestimmung der
Bemessungsleistung eines Transformators bei nichtsinusförmigen Lastströmen
Transformateurs triphasés de distribution immergés dans l'huile, 50 Hz, de 50 kVA a 2
500 kVA, de tension la plus élevée pour le matériel ne dépassant pas 36 kV -- Partie 3:
Détermination de la caractéristique de puissance d'un transformateur avec des courants
de charge non sinusoidaux
Ta slovenski standard je istoveten z: EN 50464-3:2007
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN 50464-3:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD

EN 50464-3

NORME EUROPÉENNE
April 2007
EUROPÄISCHE NORM

ICS 29.180 Supersedes HD 428.4 S1:1994


English version


Three-phase oil-immersed distribution transformers
50 Hz, from 50 kVA to 2 500 kVA with highest voltage
for equipment not exceeding 36 kV -
Part 3: Determination of the power rating of a transformer
loaded with non-sinusoidal currents



Transformateurs triphasés de distribution Ölgefüllte
immergés dans l'huile, Drehstrom-Verteilungstransformatoren
50 Hz, de 50 kVA à 2 500 kVA, 50 Hz, 50 kVA bis 2 500 kVA,
de tension la plus élevée mit einer höchsten Spannung
pour le matériel ne dépassant pas 36 kV - für Betriebsmittel bis 36 kV -
Partie 3: Détermination Teil 3: Bestimmung
de la caractéristique de puissance der Bemessungsleistung
d'un transformateur avec des courants eines Transformators bei
de charge non sinusoïdaux nichtsinusförmigen Lastströmen

This European Standard was approved by CENELEC on 2007-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50464-3:2007 E

---------------------- Page: 2 ----------------------

EN 50464-3:2007 - 2 -
Foreword
The text of the Harmonization Document HD 428.4 S1:1994, prepared by the Technical Committee
CENELEC TC 14, Power transformers, was submitted to the formal vote for conversion into a
European Standard and was approved by CENELEC as EN 50464-3 on 2007-02-01.
The following date was fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-02-01
The EN 50464 series consists of the following parts, under the general title “Three-phase oil-immersed
distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not
exceeding 36 kV” :
Part 1 General requirements
Part 2-1 Distribution transformers with cable boxes on the high-voltage and/or low-voltage
side – General requirements
Part 2-2 Distribution transformers with cable boxes on the high-voltage and/or low-voltage
side – Cable boxes type 1 for use on distribution transformers meeting the
requirements of EN 50464-2-1
Part 2-3 Distribution transformers with cable boxes on the high-voltage and/or
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.