EN 60966-2-3:2003
(Main)Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies
Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies
Relates to the subfamily of flexible coaxial cables and BNC connector assemblies. Gives subfamily requirements and severities to apply. Should be used together with EN 60966-2-1 and EN 60966-1.
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-3: Bauartspezifikation für flexible konfektionierte Koaxialkabel
Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie 2-3: Spécification particulière pour cordons coaxiaux souples
Concerne la sous-famille de connecteurs BNC et de câbles souples assemblés. Donne les exigences et les sévérités à appliquer à la sous-famille.
Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60966-2-3:2004
STANDARD
april 2004
Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for
flexible coaxial cable assemblies (IEC 60966-2-3:2003)
ICS 33.120.10 Referenčna številka
SIST EN 60966-2-3:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60966-2-3
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003
ICS 33.120.10 Supersedes EN 60966-2-3:1999
English version
Radio frequency and coaxial cable assemblies
Part 2-3: Detail specification for flexible coaxial cable assemblies
(IEC 60966-2-3:2003)
Ensembles de cordons coaxiaux Konfektionierte Koaxial- und
et de cordons pour fréquences Hochfrequenzkabel
radioélectriques Teil 2-3: Bauartspezifikation
Partie 2-3: Spécification particulière für flexible konfektionierte Koaxialkabel
pour cordons coaxiaux souples (IEC 60966-2-3:2003)
(CEI 60966-2-3:2003)
This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60966-2-3:2003 E
---------------------- Page: 2 ----------------------
EN 60966-2-3:2003 - 2 -
Foreword
The text of document 46A/547/FDIS, future edition 2 of IEC 60966-2-3, prepared by SC 46A, Coaxial
cables, of IEC TC 46, Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive
components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60966-2-3 on 2003-10-01.
This European Standard supersedes EN 60966-2-3:1999.
The major change with respect to EN 60966-2-3:1999 is the reference to the 1999 edition of the generic
specification EN 60966-1.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01
This detail specification is to be read with EN 60966-1:1999, Radio frequency and coaxial cable
assemblies – Part 1: Generic specification - General requirements and test methods, with
EN 60966-2-1:2003, Radio frequency and coaxial cable assemblies – Part 2-1: Sectional specification
for flexible coaxial cable assemblies and with EN 60966-2-2:2003, Radio frequency and coaxial cable
assemblies – Part 2-2: Blank detail specification for flexible coaxial cable assemblies.
__________
Endorsement notice
The text of the International Standard IEC 60966-2-3:2003 was approved by CENELEC as a
European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
NORME CEI
INTERNATIONALE IEC
60966-2-3
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-07
Ensembles de cordons coaxiaux et de
cordons pour fréquences radioélectriques –
Partie 2-3:
Spécification particulière pour cordons
coaxiaux souples
Radio frequency and coaxial cable assemblies –
Part 2-3:
Detail specification for flexible coaxial
cable assemblies
IEC 2003 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
Inte
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.