ETSI EN 301 908-14 V11.1.2 (2017-04)
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)
REN/MSG-TFES-11-14-RED-C1
Celična omrežja IMT - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU - 14. del: Bazne postaje za razviti prizemni radijski dostop za UMTS (E-UTRA)
Ta dokument se uporablja za radijsko opremo naslednjih vrst:
1) Bazna postaja za razviti prizemni radijski dostop za UMTS (E-UTRA).
Ta dokument zajema zahteve za bazne postaje E-UTRA iz izdaj 8, 9, 10 in 11 standarda 3GPP.
To vključuje zahteve za pasove bazne postaje E-UTRA in pasove bazne postaje E-UTRA CA iz izdaje 12 standarda 3GPP.
Ta dokument zajema bistvene zahteve člena 3.2 direktive 2014/53/EU [i.2] pod pogoji iz dodatka A.
General Information
Standards Content (Sample)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU;
Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA)
Base Stations (BS)
2 ETSI EN 301 908-14 V11.1.2 (2017-04)
Reference
REN/MSG-TFES-11-14-RED-C1
Keywords
3G, 3GPP, cellular, digital, E-UTRA, IMT,
IMT-2000, LTE, mobile, radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 301 908-14 V11.1.2 (2017-04)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 15
3.3 Abbreviations . 16
4 Technical requirements specifications . 17
4.1 Environmental profile . 17
4.2 Conformance requirements . 17
4.2.1 Introduction. 17
4.2.2 Operating band unwanted emissions . 21
4.2.2.1 Definition . 21
4.2.2.2 Limits . 22
4.2.2.2.0 General . 22
4.2.2.2.1 Limits for Wide Area BS (Bands 1, 3, 8, 32, 33 and 34) . 23
4.2.2.2.2 Limits for Wide Area BS (Bands 7, 22, 38, 40, 42 and 43) . 25
4.2.2.2.3 Limits for Wide Area BS (Band 20 and 28) . 28
4.2.2.2.4 Limits for Local Area BS . 29
4.2.2.2.5 Limits for Home BS . 31
4.2.2.2.6 Limits for protection of DTT . 32
4.2.2.2.7 Limits for protection of adjacent band services . 33
4.2.2.2.8 Limits for Medium Range BS . 33
4.2.2.2.9 Limits for operation in Band 32 . 37
4.2.2.3 Conformance . 38
4.2.3 Adjacent Channel Leakage Power Ratio (ACLR) . 38
4.2.3.1 Definition . 38
4.2.3.2 Void. 39
4.2.3.3 Void. 39
4.2.3.4 Limits . 39
4.2.3.4.1 ACLR Limits . 39
4.2.3.4.2 Cumulative ACLR test requirement in non-contiguous spectrum limits . 40
4.2.3.5 Conformance . 41
4.2.4 Transmitter spurious emis sions . 42
4.2.4.1 Definition . 42
4.2.4.2 Limits . 42
4.2.4.2.1 Spurious emissions . 42
4.2.4.2.2 Co-existence with other systems . 42
4.2.4.2.3 Protection of the BS receiver of own or different BS . 44
4.2.4.2.4 Co-existence with Home BS operating in other bands . 44
4.2.4.3 Conformance . 45
4.2.5 Base Station maximum output power . 45
4.2.5.1 Definition . 45
4.2.5.2 Limit . 46
4.2.5.3 Conformance . 46
4.2.6 Transmitter intermodulation . 46
4.2.6.1 Definition . 46
4.2.6.2 Limit . 46
4.2.6.3 Conformance . 47
ETSI
4 ETSI EN 301 908-14 V11.1.2 (2017-04)
4.2.7 Receiver spurious emissions . 47
4.2.7.1 Definition . 47
4.2.7.2 Limit . 47
4.2.7.3 Conformance . 48
4.2.8 Blocking characteristics . 48
4.2.8.1 Definition . 48
4.2.8.2 Limit . 48
4.2.8.3 Conformance . 51
4.2.9 Receiver intermodulation characteristics . 51
4.2.9.1 Definition . 51
4.2.9.2 Limit . 51
4.2.9.3 Conformance . 55
4.2.10 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 55
4.2.10.1 Definition . 55
4.2.10.2 Limit . 55
4.2.10.3 Conformance . 59
4.2.11 Home BS output power for adjacent UTRA channel protection. 59
4.2.11.1 Definition . 59
4.2.11.2 Limit . 59
4.2.11.3 Conformance . 60
4.2.12 Home BS output power for adjacent E-UTRA channel protection . 60
4.2.12.1 Definition and applicability . 60
4.2.12.2 Limit . 60
4.2.12.3 Conformance . 61
4.2.13 Home BS output power for co-channel E-UTRA protection . 61
4.2.13.1 Definition and applicability . 61
4.2.13.2 Limit . 62
4.2.13.3 Conformance . 63
4.2.14 Reference sensitivity level . 63
4.2.14.1 Definition and applicability . 63
4.2.14.2 Limits . 63
4.2.14.3 Conformance . 64
5 Testing for compliance with technical requirements . 64
5.1 Environmental conditions for testing . 64
5.2 Interpretation of the measurement results . 65
5.3 Essential radio test suites . 66
5.3.0 Introduction. 66
5.3.1 Operating band unwanted emissions . 66
5.3.1.0 General . 66
5.3.1.1 Initial conditions . 66
5.3.1.2 Procedure . 67
5.3.1.3 Test requirement . 67
5.3.2 Adjacent Channel Leakage power Ratio (ACLR) . 67
5.3.2.1 Initial conditions . 67
5.3.2.2 Procedure . 68
5.3.2.3 Test requirement . 68
5.3.3 Transmitter spurious emis sions . 68
5.3.3.0 General . 68
5.3.3.1 Initial conditions . 68
5.3.3.2 Procedure . 69
5.3.3.3 Test requirements . 69
5.3.4 Base Station maximum output power . 69
5.3.4.0 General . 69
5.3.4.1 Initial conditions . 69
5.3.4.2 Procedure . 70
5.3.4.3 Test requirement . 70
5.3.5 Transmitter intermodulation . 70
5.3.5.0 General . 70
5.3.5.1 Initial conditions . 70
5.3.5.2 Procedures . 70
5.3.5.3 Test requirement . 71
ETSI
5 ETSI EN 301 908-14 V11.1.2 (2017-04)
5.3.6 Receiver spurious emissions . 71
5.3.6.0 General . 71
5.3.6.1 Initial conditions . 71
5.3.6.2 Procedure . 72
5.3.6.3 Test requirement . 72
5.3.7 Blocking characteristics . 72
5.3.7.0 General . 72
5.3.7.1 Initial conditions . 72
5.3.7.2 Procedure . 73
5.3.7.3 Test requirement . 73
5.3.8 Receiver intermodulation characteristics . 74
5.3.8.0 General . 74
5.3.8.1 Initial conditions . 74
5.3.8.2 Procedures . 74
5.3.8.3 Test requirement . 74
5.3.9 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 75
5.3.9.0 General . 75
5.3.9.1 Initial conditions . 75
5.3.9.2 Procedure for Adjacent Channel Selectivity . 75
5.3.9.3 Procedure for narrow-band blocking . 75
5.3.9.4 Test requirement . 76
5.3.10 Home BS output power for adjacent UTRA channel protection. 76
5.3.10.1 Initial conditions . 76
5.3.10.2 Procedure . 76
5.3.10.3 Test requirement . 77
5.3.11 Home BS output power for adjacent E-UTRA channel protection . 77
5.3.11.1 Initial conditions . 77
5.3.11.2 Procedure . 77
5.3.11.3 Test requirement . 78
5.3.12 Home BS output power for co-channel E-UTRA protection . 78
5.3.12.1 Initial conditions . 78
5.3.12.2 Procedure . 78
5.3.12.3 Test requirement . 79
5.3.13 Reference sensitivity level . 79
5.3.13.0 General . 79
5.3.13.1 Initial conditions . 79
5.3.13.2 Procedure . 79
5.3.13.3 Test requirement . 80
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 81
Annex B (normative): Base Station configurations . 83
B.1 Reception with multiple receiver antenna connectors, receiver diversity . 83
B.2 Duplexers . 83
B.3 Power supply options . 83
B.4 Ancillary RF amplifiers . 84
B.5 BS using antenna arrays . 84
B.5.0 General . 84
B.5.1 Receiver tests . 85
B.5.2 Transmitter tests . 85
B.6 Transmission with multiple transmitter antenna connectors . 86
B.7 BS with integrated Iuant BS modem . 86
Annex C (informative): Environmental profile specification . 87
Annex D (informative): Bibliography . 88
ETSI
6 ETSI EN 301 908-14 V11.1.2 (2017-04)
Annex E (informative): Change history . 89
History . 90
ETSI
7 ETSI EN 301 908-14 V11.1.2 (2017-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group
(MSG).
For non EU countries the present document may be used for regulatory (Type Approval) purposes.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.1] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 14 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.7].
National transposition dates
Date of latest announcement of this EN (doa): 31 July 2017
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2017
Date of withdrawal of any conflicting National Standard (dow): 31 January 2018
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to
cover radio equipment within the scope of the Radio Equipment Directive [i.2]. The present document is produced
following the guidance in ETSI EG 203 336 [i.3] as applicable.
ETSI
8 ETSI EN 301 908-14 V11.1.2 (2017-04)
1 Scope
The present document applies to the following radio equipment types:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1.
Table 1-1: E-UTRA Base Station operating bands
E-UTRA band Direction of transmission E-UTRA Base Station operating bands
1 Transmit 2 110 MHz to 2 170 MHz
Receive 1 920 MHz to 1 980 MHz
3 Transmit 1 805 MHz to 1 880 MHz
Receive 1 710 MHz to 1 785 MHz
7 Transmit 2 620 MHz to 2 690 MHz
Receive 2 500 MHz to 2 570 MHz
8 Transmit 925 MHz to 960 MHz
Receive 880 MHz to 915 MHz
20 Transmit 791 MHz to 821 MHz
Receive 832 MHz to 862 MHz
22 Transmit 3 510 MHz to 3 590 MHz
Receive 3 410 MHz to 3 490 MHz
Transmit 758 MHz to 803 MHz
Receive 703 MHz to 748 MHz
32 Transmit 1 452 MHz to 1 496 MHz
(note 1) Receive N/A
(note 2)
33 Transmit and Receive 1 900 MHz to 1 920 MHz
34 Transmit and Receive 2 010 MHz to 2 025 MHz
38 Transmit and Receive 2 570 MHz to 2 620 MHz
40 Transmit and Receive 2 300 MHz to 2 400 MHz
42 Transmit and Receive 3 400 MHz to 3 600 MHz
43 Transmit and Receive 3 600 MHz to 3 800 MHz
NOTE 1: Restricted to E-UTRA operation when carrier aggregation is configured. The downlink operating
band is paired with the uplink operating band (external) of the carrier aggregation configuration
that is supporting the configured Pcell.
NOTE 2: Radio equipment in band 32 is only allowed to operate between 1 452 MHz and 1 492 MHz.
The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10 and 11. This includes
the requirements for E-UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.2] under the
conditions identified in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
ETSI
9 ETSI EN 301 908-14 V11.1.2 (2017-04)
[1] ETSI TS 136 141 (V11.14.0) (01-2016): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 11.14.0
Release 11)".
[2] ETSI TS 125 104 (V11.12.0) (01-2016): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 11.12.0
Release 11)".
[3] ETSI TS 125 105 (V11.9.0) (01-2016): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) radio transmission and reception (TDD) (3GPP TS 25.105 version 11.9.0
Release 11)".
[4] ETSI TS 136 104 (V11.14.0) (01-2016): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 11.14.0
Release 11)".
[5] ETSI TS 125 141 (V11.12.0) (01-2016): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 11.12.0 Release 11)".
[6] ETSI TS 136 211 (V11.6.0) (10-2014): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Physical channels and modulation (3GPP TS 36.211 version 11.6.0 Release 11)".
[7] ETSI EN 301 908-18 (V11.1.2) (04-2017): "IMT cellular networks; Harmonised Standard
covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 18: E-UTRA,
UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.2] Directive 2014/53/EU of the European parliament and of the council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI EG 203 336 (V1.1.1) (08-2015): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Guide for the selection of technical parameters for the production of Harmonised
Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.4] Recommendation ITU-R SM.329-12 (09-2012): "Unwanted emissions in the spurious domain".
[i.5] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[i.6] ETSI TS 136 104 (V12.10.0) (01-2016): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 12.10.0
Release 12)".
[i.7] ETSI EN 301 908-1 (V11.1.1): "IMT cellular networks; Harmonised Standard covering the
essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and
common requirements".
ETSI
10 ETSI EN 301 908-14 V11.1.2 (2017-04)
[i.8] ETSI TS 136 214 (V11.1.0) (02-2013): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Physical layer; Measurements (3GPP TS 36.214 version 11.1.0 Release 11)".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
Aggregated Channel Bandwidth: RF bandwidth in which a Base Station transmits and receives multiple contiguously
aggregated carriers
NOTE: The Aggregated Channel Bandwidth is measured in MHz.
Base Station class: Wide Area Base Station, Medium Range Base Station, Local Area Base Station or Home
Base Station, as declared by the manufacturer
Base Station RF Bandwidth: RF bandwidth in which a Base Station transmits and/or receives single or multiple
carrier(s) within a supported operating band
NOTE: In single carrier operation, the Base Station RF Bandwidth is equal to the channel bandwidth.
Base Station RF Bandwidth edge: frequency of one of the edges of the Base Station RF Bandwidth
NOTE: Base Station RF Bandwidth edges are separated by the Base Station RF Bandwidth
carrier: modulated waveform conveying the E-UTRA or UTRA (WCDMA) physical channels
carrier aggregation: aggregation of two or more component carriers in order to support wider transmission bandwidths
carrier aggregation band: set of one or more operating bands across which multiple carriers are aggregated with a
specific set of technical requirements
NOTE: Carrier aggregation band(s) for an E-UTRA BS is declared by the manufacturer according to the
designations in tables 4.2.1-3 to 4.2.1-4.
channel bandwidth: RF bandwidth supporting a single E-UTRA RF carrier with the transmission bandwidth
configured in the uplink or downlink of a cell
NOTE: The channel bandwidth is measured in MHz and is used as a reference for transmitter and receiver RF
requirements.
channel edge: lowest or highest frequency of the E-UTRA carrier
NOTE: Channel edges are separated by the channel bandwidth.
contiguous carriers: two or more carriers configured in a spectrum block where there are no RF requirements based on
co-existence for un-coordinated operation within the spectrum block
contiguous spectrum: spectrum consisting of a contiguous block of spectrum with no sub-block gaps
downlink operating band: part of the operating band designated for downlink (BS transmit)
Downlink Reference Symbol (DL RS) power: resource element power of Downlink Reference Symbol
Home Base Station: Base Stations characterized by requirements derived from femtocell scenarios
Inter RF Bandwidth gap: frequency gap between two consecutive Base Station RF Bandwidths that are placed within
two supported operating bands
inter-band carrier aggregation: carrier aggregation of component carriers in different operating bands
NOTE: Carriers aggregated in each band can be contiguous or non-contiguous.
ETSI
11 ETSI EN 301 908-14 V11.1.2 (2017-04)
inter-band gap: frequency gap between two supported consecutive operating bands
intra-band contiguous carrier aggregation: contiguous carriers aggregated in the same operating band
intra-band non-contiguous carrier aggregation: non-contiguous carriers aggregated in the same operating band
Local Area Base Station: Base Stations characterized by requirements derived from picocell scenarios with a BS to
UE minimum coupling loss equal to 45 dB
lower sub-block edge: frequency at the lower edge of one sub-block
NOTE: It is used as a frequency reference point for both transmitter and receiver requirements.
maximum Base Station RF Bandwidth: maximum RF bandwidth supported by a BS within each supported operating
band
maximum output power: mean power level per carrier of the Base Station measured at the antenna connector in a
specified reference condition
Maximum Radio Bandwidth: maximum frequency difference between the upper edge of the highest used carrier and
the lower edge of the lowest used carrier
maximum throughput: maximum achievable throughput for a reference measurement channel
mean power: when applied to E-UTRA transmission, power measured in the channel bandwidth of the carrier where
the period of measurement is at least one subframe (1 ms), unless otherwise stated
Medium Range Base Station: Base Stations characterized by requirements derived from micro cell scenarios with a
BS to UE minimum coupling loss equal to 53 dB
multi-band Base Station: Base Station characterized by the ability of its transmitter and/or receiver to process two or
more carriers in common active RF components simultaneously, where at least one carrier is configured at a different
non-overlapping operating band than the other carrier(s)
multi-band receiver: receiver characterized by the ability to process two or more carriers in common active RF
components simultaneously, where at least one carrier is configured at a different non-overlapping operating band than
the other carrier(s)
multi-band transmitter: transmitter characterized by the ability to process two or more carriers in common active RF
components simultaneously, where at least one carrier is configured at a different non-overlapping operating band than
the other carrier(s)
multi-carrier transmission configuration: set of one or more contiguous carriers that a BS is able to transmit
simultaneously according to the manufacturer's specification
non-contiguous spectrum: spectrum consisting of two or more sub-blocks separated by sub-block gap(s)
operating band: frequency range (paired or unpaired) that is defined with a specific set of technical requirements, in
which E-UTRA operates
NOTE: The operating band(s) for an E-UTRA BS is declared by the manufacturer according to the de
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU - Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:ETSI EN 301 908-14 V11.1.2 (2017-04)SIST EN 301 908-14 V11.1.2:2017en01-junij-2017SIST EN 301 908-14 V11.1.2:2017SLOVENSKI
STANDARD
HARMONISED EUROPEAN STANDARD SIST EN 301 908-14 V11.1.2:2017
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 2
Reference REN/MSG-TFES-11-14-RED-C1 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-2000, LTE, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-14 V11.1.2:2017
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 3 Contents Intellectual Property Rights . 7 Foreword . 7 Modal verbs terminology . 7 Introduction . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 10 3.1 Definitions . 10 3.2 Symbols . 15 3.3 Abbreviations . 16 4 Technical requirements specifications . 17 4.1 Environmental profile . 17 4.2 Conformance requirements . 17 4.2.1 Introduction. 17 4.2.2 Operating band unwanted emissions . 21 4.2.2.1 Definition . 21 4.2.2.2 Limits . 22 4.2.2.2.0 General . 22 4.2.2.2.1 Limits for Wide Area BS (Bands 1, 3, 8, 32, 33 and 34) . 23 4.2.2.2.2 Limits for Wide Area BS (Bands 7, 22, 38, 40, 42 and 43) . 25 4.2.2.2.3 Limits for Wide Area BS (Band 20 and 28) . 28 4.2.2.2.4 Limits for Local Area BS . 29 4.2.2.2.5 Limits for Home BS . 31 4.2.2.2.6 Limits for protection of DTT . 32 4.2.2.2.7 Limits for protection of adjacent band services . 33 4.2.2.2.8 Limits for Medium Range BS . 33 4.2.2.2.9 Limits for operation in Band 32 . 37 4.2.2.3 Conformance . 38 4.2.3 Adjacent Channel Leakage Power Ratio (ACLR) . 38 4.2.3.1 Definition . 38 4.2.3.2 Void. 39 4.2.3.3 Void. 39 4.2.3.4 Limits . 39 4.2.3.4.1 ACLR Limits . 39 4.2.3.4.2 Cumulative ACLR test requirement in non-contiguous spectrum limits . 40 4.2.3.5 Conformance . 41 4.2.4 Transmitter spurious emissions . 42 4.2.4.1 Definition . 42 4.2.4.2 Limits . 42 4.2.4.2.1 Spurious emissions . 42 4.2.4.2.2 Co-existence with other systems . 42 4.2.4.2.3 Protection of the BS receiver of own or different BS . 44 4.2.4.2.4 Co-existence with Home BS operating in other bands . 44 4.2.4.3 Conformance . 45 4.2.5 Base Station maximum output power . 45 4.2.5.1 Definition . 45 4.2.5.2 Limit . 46 4.2.5.3 Conformance . 46 4.2.6 Transmitter intermodulation . 46 4.2.6.1 Definition . 46 4.2.6.2 Limit . 46 4.2.6.3 Conformance . 47 SIST EN 301 908-14 V11.1.2:2017
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 4 4.2.7 Receiver spurious emissions . 47 4.2.7.1 Definition . 47 4.2.7.2 Limit . 47 4.2.7.3 Conformance . 48 4.2.8 Blocking characteristics . 48 4.2.8.1 Definition . 48 4.2.8.2 Limit . 48 4.2.8.3 Conformance . 51 4.2.9 Receiver intermodulation characteristics . 51 4.2.9.1 Definition . 51 4.2.9.2 Limit . 51 4.2.9.3 Conformance . 55 4.2.10 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 55 4.2.10.1 Definition . 55 4.2.10.2 Limit . 55 4.2.10.3 Conformance . 59 4.2.11 Home BS output power for adjacent UTRA channel protection. 59 4.2.11.1 Definition . 59 4.2.11.2 Limit . 59 4.2.11.3 Conformance . 60 4.2.12 Home BS output power for adjacent E-UTRA channel protection . 60 4.2.12.1 Definition and applicability . 60 4.2.12.2 Limit . 60 4.2.12.3 Conformance . 61 4.2.13 Home BS output power for co-channel E-UTRA protection . 61 4.2.13.1 Definition and applicability . 61 4.2.13.2 Limit . 62 4.2.13.3 Conformance . 63 4.2.14 Reference sensitivity level . 63 4.2.14.1 Definition and applicability . 63 4.2.14.2 Limits . 63 4.2.14.3 Conformance . 64 5 Testing for compliance with technical requirements . 64 5.1 Environmental conditions for testing . 64 5.2 Interpretation of the measurement results . 65 5.3 Essential radio test suites . 66 5.3.0 Introduction. 66 5.3.1 Operating band unwanted emissions . 66 5.3.1.0 General . 66 5.3.1.1 Initial conditions . 66 5.3.1.2 Procedure . 67 5.3.1.3 Test requirement . 67 5.3.2 Adjacent Channel Leakage power Ratio (ACLR) . 67 5.3.2.1 Initial conditions . 67 5.3.2.2 Procedure . 68 5.3.2.3 Test requirement . 68 5.3.3 Transmitter spurious emissions . 68 5.3.3.0 General . 68 5.3.3.1 Initial conditions . 68 5.3.3.2 Procedure . 69 5.3.3.3 Test requirements . 69 5.3.4 Base Station maximum output power . 69 5.3.4.0 General . 69 5.3.4.1 Initial conditions . 69 5.3.4.2 Procedure . 70 5.3.4.3 Test requirement . 70 5.3.5 Transmitter intermodulation . 70 5.3.5.0 General . 70 5.3.5.1 Initial conditions . 70 5.3.5.2 Procedures . 70 5.3.5.3 Test requirement . 71 SIST EN 301 908-14 V11.1.2:2017
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 5 5.3.6 Receiver spurious emissions . 71 5.3.6.0 General . 71 5.3.6.1 Initial conditions . 71 5.3.6.2 Procedure . 72 5.3.6.3 Test requirement . 72 5.3.7 Blocking characteristics . 72 5.3.7.0 General . 72 5.3.7.1 Initial conditions . 72 5.3.7.2 Procedure . 73 5.3.7.3 Test requirement . 73 5.3.8 Receiver intermodulation characteristics . 74 5.3.8.0 General . 74 5.3.8.1 Initial conditions . 74 5.3.8.2 Procedures . 74 5.3.8.3 Test requirement . 74 5.3.9 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 75 5.3.9.0 General . 75 5.3.9.1 Initial conditions . 75 5.3.9.2 Procedure for Adjacent Channel Selectivity . 75 5.3.9.3 Procedure for narrow-band blocking . 75 5.3.9.4 Test requirement . 76 5.3.10 Home BS output power for adjacent UTRA channel protection. 76 5.3.10.1 Initial conditions . 76 5.3.10.2 Procedure . 76 5.3.10.3 Test requirement . 77 5.3.11 Home BS output power for adjacent E-UTRA channel protection . 77 5.3.11.1 Initial conditions . 77 5.3.11.2 Procedure . 77 5.3.11.3 Test requirement . 78 5.3.12 Home BS output power for co-channel E-UTRA protection . 78 5.3.12.1 Initial conditions . 78 5.3.12.2 Procedure . 78 5.3.12.3 Test requirement . 79 5.3.13 Reference sensitivity level . 79 5.3.13.0 General . 79 5.3.13.1 Initial conditions . 79 5.3.13.2 Procedure . 79 5.3.13.3 Test requirement . 80 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 81 Annex B (normative): Base Station configurations . 83 B.1 Reception with multiple receiver antenna connectors, receiver diversity . 83 B.2 Duplexers . 83 B.3 Power supply options . 83 B.4 Ancillary RF amplifiers . 84 B.5 BS using antenna arrays . 84 B.5.0 General . 84 B.5.1 Receiver tests . 85 B.5.2 Transmitter tests . 85 B.6 Transmission with multiple transmitter antenna connectors . 86 B.7 BS with integrated Iuant BS modem . 86 Annex C (informative): Environmental profile specification . 87 Annex D (informative): Bibliography . 88 SIST EN 301 908-14 V11.1.2:2017
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 6 Annex E (informative): Change history . 89 History . 90
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 7 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.1] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.2]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 14 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.7].
National transposition dates Date of latest announcement of this EN (doa): 31 July 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2017 Date of withdrawal of any conflicting National Standard (dow): 31 January 2018
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive [i.2]. The present document is produced following the guidance in ETSI EG 203 336 [i.3] as applicable.
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 8 1 Scope The present document applies to the following radio equipment types: 1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA). This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1. Table 1-1: E-UTRA Base Station operating bands E-UTRA band Direction of transmission E-UTRA Base Station operating bands 1 Transmit
2 110 MHz to 2 170 MHz Receive
1 920 MHz to 1 980 MHz 3 Transmit
1 805 MHz to 1 880 MHz Receive
1 710 MHz to 1 785 MHz 7 Transmit
2 620 MHz to 2 690 MHz Receive
2 500 MHz to 2 570 MHz 8 Transmit
925 MHz to 960 MHz Receive
880 MHz to 915 MHz 20 Transmit
791 MHz to 821 MHz Receive
832 MHz to 862 MHz 22 Transmit
3 510 MHz to 3 590 MHz Receive
3 410 MHz to 3 490 MHz 28 Transmit 758 MHz to 803 MHz Receive 703 MHz to 748 MHz 32 (note 1) (note 2) Transmit 1 452 MHz to 1 496 MHz Receive N/A 33 Transmit and Receive 1 900 MHz to 1 920 MHz 34 Transmit and Receive 2 010 MHz to 2 025 MHz 38 Transmit and Receive 2 570 MHz to 2 620 MHz 40 Transmit and Receive 2 300 MHz to 2 400 MHz 42 Transmit and Receive 3 400 MHz to 3 600 MHz 43 Transmit and Receive 3 600 MHz to 3 800 MHz NOTE 1: Restricted to E-UTRA operation when carrier aggregation is configured. The downlink operating band is paired with the uplink operating band (external) of the carrier aggregation configuration that is supporting the configured Pcell. NOTE 2: Radio equipment in band 32 is only allowed to operate between 1 452 MHz and 1 492 MHz.
The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10 and 11. This includes the requirements for E-UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.2] under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. SIST EN 301 908-14 V11.1.2:2017
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 9 [1] ETSI TS 136 141 (V11.14.0) (01-2016): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141 version 11.14.0 Release 11)". [2] ETSI TS 125 104 (V11.12.0) (01-2016): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 11.12.0 Release 11)". [3] ETSI TS 125 105 (V11.9.0) (01-2016): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (TDD) (3GPP TS 25.105 version 11.9.0 Release 11)". [4] ETSI TS 136 104 (V11.14.0) (01-2016): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 11.14.0 Release 11)". [5] ETSI TS 125 141 (V11.12.0) (01-2016): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 11.12.0 Release 11)". [6] ETSI TS 136 211 (V11.6.0) (10-2014): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and modulation (3GPP TS 36.211 version 11.6.0 Release 11)". [7] ETSI EN 301 908-18 (V11.1.2) (04-2017): "IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)". 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. [i.2] Directive 2014/53/EU of the European parliament and of the council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. [i.3] ETSI EG 203 336 (V1.1.1) (08-2015): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for the selection of technical parameters for the production of Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU". [i.4] Recommendation ITU-R SM.329-12 (09-2012): "Unwanted emissions in the spurious domain". [i.5] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". [i.6] ETSI TS 136 104 (V12.10.0) (01-2016): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception (3GPP TS 36.104 version 12.10.0 Release 12)". [i.7] ETSI EN 301 908-1 (V11.1.1): "IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements". SIST EN 301 908-14 V11.1.2:2017
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 10 [i.8] ETSI TS 136 214 (V11.1.0) (02-2013): "LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer; Measurements (3GPP TS 36.214 version 11.1.0 Release 11)". 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Aggregated Channel Bandwidth: RF bandwidth in which a Base Station transmits and receives multiple contiguously aggregated carriers NOTE: The Aggregated Channel Bandwidth is measured in MHz. Base Station class: Wide Area Base Station, Medium Range Base Station, Local Area Base Station or Home Base Station, as declared by the manufacturer Base Station RF Bandwidth: RF bandwidth in which a Base Station transmits and/or receives single or multiple carrier(s) within a supported operating band NOTE: In single carrier operation, the Base Station RF Bandwidth is equal to the channel bandwidth. Base Station RF Bandwidth edge: frequency of one of the edges of the Base Station RF Bandwidth NOTE: Base Station RF Bandwidth edges are separated by the Base Station RF Bandwidth carrier: modulated waveform conveying the E-UTRA or UTRA (WCDMA) physical channels carrier aggregation: aggregation of two or more component carriers in order to support wider transmission bandwidths carrier aggregation band: set of one or more operating bands across which multiple carriers are aggregated with a specific set of technical requirements NOTE: Carrier aggregation band(s) for an E-UTRA BS is declared by the manufacturer according to the designations in tables 4.2.1-3 to 4.2.1-4. channel bandwidth: RF bandwidth supporting a single E-UTRA RF carrier with the transmission bandwidth configured in the uplink or downlink of a cell NOTE: The channel bandwidth is measured in MHz and is used as a reference for transmitter and receiver RF requirements. channel edge: lowest or highest frequency of the E-UTRA carrier NOTE: Channel edges are separated by the channel bandwidth. contiguous carriers: two or more carriers configured in a spectrum block where there are no RF requirements based on co-existence for un-coordinated operation within the spectrum block contiguous spectrum: spectrum consisting of a contiguous block of spectrum with no sub-block gaps downlink operating band: part of the operating band designated for downlink (BS transmit) Downlink Reference Symbol (DL RS) power: resource element power of Downlink Reference Symbol Home Base Station: Base Stations characterized by requirements derived from femtocell scenarios
Inter RF Bandwidth gap: frequency gap between two consecutive Base Station RF Bandwidths that are placed within two supported operating bands inter-band carrier aggregation: carrier aggregation of component carriers in different operating bands NOTE: Carriers aggregated in each band can be contiguous or non-contiguous. SIST EN 301 908-14 V11.1.2:2017
ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 11 inter-band gap: frequency gap between two supported consecutive operating bands intra-band contiguous carrier aggregation: contiguous carriers aggregated in the same operating band intra-band non-contiguous carrier aggregation: non-contiguous carriers aggregated in the same operating band Local Area Base Station: Base Stations characterized by requirements derived from picocell scenarios with a BS to UE minimum coupling loss equal to 45 dB lower sub-block edge: frequency at the lower edge of one sub-block NOTE: It is used as a frequency reference point for both transmitter and receiver requirements. maximum Base Station RF Bandwidth: maximum RF bandwidth supported by a BS within each supported operating band maximum output power: mean power level per carrier of the Base Station measured at the antenna connector in a specified reference condition Maximum Radio Bandwidth: maximum frequency difference between the upper edge of the highest used carrier and the lower edge of the lowest used carrier maximum throughput: maximum achievable throughput for a reference measurement channel mean power: when applied to E-UTRA transmission, power measured in the channel bandwidth of the carrier where the period of measurement is at least one subframe (1 ms), unless otherwise stated Medium Range Base Station: Base Stations characterized by requirements derived from micro cell scenarios with a BS to UE minimum coupling loss equal to 53 dB multi-band Base Station: Base Station characterized by the ability of its transmitter and/or receiver to process two or more carriers in common active RF components simultaneously, where at least one carrier is configured at a different non-overlapping operating band than the other carrier(s) multi-band receiver: receiver characterized by the ability to process two or more carriers in common active RF components simultaneously, where at least one carrier is configured at a different non-overlapping operating band than the other carrier(s) multi-band transmitter: transmitter characterized by the ability to process two or more carriers in common active RF components simultaneously, where at least one carrier is configured at a different non-overlapping operating band than the other carrier(s) multi-carrier transmission configuration: set of one or more contiguous carriers that a BS is able to transmit simultaneously according to the manufacturer's specification non-contiguous spectrum: spectrum consisting of two or more sub-blocks separated by sub-block gap(s) operating band: frequency range (paired or unpaired) that is defined with a specific set of technical requirements, in which E-UTRA operates NOTE: The operating band(s) for an E-UTRA BS is declared by the manufacturer according to the designations in table 1-1. Operating bands for E-UTRA are desig
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...