IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU - Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)

The present document applies to the following radio equipment types:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
The present document covers requirements for E-UTRA Base Stations for 3GPP Release 8, 9, 10 and 11. This includes
1) the requirements for E-UTRA Base Station operating bands and E-UTRA CA operating bands from 3GPP Release 12.
2) The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.2] under the
3) conditions identified in annex A.

Celična omrežja IMT - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU - 14. del: Bazne postaje za razviti prizemni radijski dostop za UMTS (E-UTRA)

Ta dokument se uporablja za radijsko opremo naslednjih vrst:
1) Bazna postaja za razviti prizemni radijski dostop za UMTS (E-UTRA).
Ta dokument zajema zahteve za bazne postaje E-UTRA iz izdaj 8, 9, 10 in 11 standarda 3GPP.
To vključuje zahteve za pasove bazne postaje E-UTRA in pasove bazne postaje E-UTRA CA iz izdaje 12 standarda 3GPP.
Ta dokument zajema bistvene zahteve člena 3.2 direktive 2014/53/EU [i.2] pod pogoji iz dodatka A.

General Information

Status
Published
Publication Date
14-May-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Apr-2017
Due Date
23-Jun-2017
Completion Date
15-May-2017

Buy Standard

Standard
EN 301 908-14 V11.1.2:2017
English language
90 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 301 908-14 V11.1.2 (2017-04) - IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)
English language
90 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU - Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:ETSI EN 301 908-14 V11.1.2 (2017-04)SIST EN 301 908-14 V11.1.2:2017en01-junij-2017SIST EN 301 908-14 V11.1.2:2017SLOVENSKI
STANDARD



SIST EN 301 908-14 V11.1.2:2017



ETSI EN 301 908-14 V11.1.2 (2017-04) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)
HARMONISED EUROPEAN STANDARD SIST EN 301 908-14 V11.1.2:2017



ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 2
Reference REN/MSG-TFES-11-14-RED-C1 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-2000, LTE, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-14 V11.1.2:2017



ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 3 Contents Intellectual Property Rights . 7 Foreword . 7 Modal verbs terminology . 7 Introduction . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 10 3.1 Definitions . 10 3.2 Symbols . 15 3.3 Abbreviations . 16 4 Technical requirements specifications . 17 4.1 Environmental profile . 17 4.2 Conformance requirements . 17 4.2.1 Introduction. 17 4.2.2 Operating band unwanted emissions . 21 4.2.2.1 Definition . 21 4.2.2.2 Limits . 22 4.2.2.2.0 General . 22 4.2.2.2.1 Limits for Wide Area BS (Bands 1, 3, 8, 32, 33 and 34) . 23 4.2.2.2.2 Limits for Wide Area BS (Bands 7, 22, 38, 40, 42 and 43) . 25 4.2.2.2.3 Limits for Wide Area BS (Band 20 and 28) . 28 4.2.2.2.4 Limits for Local Area BS . 29 4.2.2.2.5 Limits for Home BS . 31 4.2.2.2.6 Limits for protection of DTT . 32 4.2.2.2.7 Limits for protection of adjacent band services . 33 4.2.2.2.8 Limits for Medium Range BS . 33 4.2.2.2.9 Limits for operation in Band 32 . 37 4.2.2.3 Conformance . 38 4.2.3 Adjacent Channel Leakage Power Ratio (ACLR) . 38 4.2.3.1 Definition . 38 4.2.3.2 Void. 39 4.2.3.3 Void. 39 4.2.3.4 Limits . 39 4.2.3.4.1 ACLR Limits . 39 4.2.3.4.2 Cumulative ACLR test requirement in non-contiguous spectrum limits . 40 4.2.3.5 Conformance . 41 4.2.4 Transmitter spurious emissions . 42 4.2.4.1 Definition . 42 4.2.4.2 Limits . 42 4.2.4.2.1 Spurious emissions . 42 4.2.4.2.2 Co-existence with other systems . 42 4.2.4.2.3 Protection of the BS receiver of own or different BS . 44 4.2.4.2.4 Co-existence with Home BS operating in other bands . 44 4.2.4.3 Conformance . 45 4.2.5 Base Station maximum output power . 45 4.2.5.1 Definition . 45 4.2.5.2 Limit . 46 4.2.5.3 Conformance . 46 4.2.6 Transmitter intermodulation . 46 4.2.6.1 Definition . 46 4.2.6.2 Limit . 46 4.2.6.3 Conformance . 47 SIST EN 301 908-14 V11.1.2:2017



ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 4 4.2.7 Receiver spurious emissions . 47 4.2.7.1 Definition . 47 4.2.7.2 Limit . 47 4.2.7.3 Conformance . 48 4.2.8 Blocking characteristics . 48 4.2.8.1 Definition . 48 4.2.8.2 Limit . 48 4.2.8.3 Conformance . 51 4.2.9 Receiver intermodulation characteristics . 51 4.2.9.1 Definition . 51 4.2.9.2 Limit . 51 4.2.9.3 Conformance . 55 4.2.10 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 55 4.2.10.1 Definition . 55 4.2.10.2 Limit . 55 4.2.10.3 Conformance . 59 4.2.11 Home BS output power for adjacent UTRA channel protection. 59 4.2.11.1 Definition . 59 4.2.11.2 Limit . 59 4.2.11.3 Conformance . 60 4.2.12 Home BS output power for adjacent E-UTRA channel protection . 60 4.2.12.1 Definition and applicability . 60 4.2.12.2 Limit . 60 4.2.12.3 Conformance . 61 4.2.13 Home BS output power for co-channel E-UTRA protection . 61 4.2.13.1 Definition and applicability . 61 4.2.13.2 Limit . 62 4.2.13.3 Conformance . 63 4.2.14 Reference sensitivity level . 63 4.2.14.1 Definition and applicability . 63 4.2.14.2 Limits . 63 4.2.14.3 Conformance . 64 5 Testing for compliance with technical requirements . 64 5.1 Environmental conditions for testing . 64 5.2 Interpretation of the measurement results . 65 5.3 Essential radio test suites . 66 5.3.0 Introduction. 66 5.3.1 Operating band unwanted emissions . 66 5.3.1.0 General . 66 5.3.1.1 Initial conditions . 66 5.3.1.2 Procedure . 67 5.3.1.3 Test requirement . 67 5.3.2 Adjacent Channel Leakage power Ratio (ACLR) . 67 5.3.2.1 Initial conditions . 67 5.3.2.2 Procedure . 68 5.3.2.3 Test requirement . 68 5.3.3 Transmitter spurious emissions . 68 5.3.3.0 General . 68 5.3.3.1 Initial conditions . 68 5.3.3.2 Procedure . 69 5.3.3.3 Test requirements . 69 5.3.4 Base Station maximum output power . 69 5.3.4.0 General . 69 5.3.4.1 Initial conditions . 69 5.3.4.2 Procedure . 70 5.3.4.3 Test requirement . 70 5.3.5 Transmitter intermodulation . 70 5.3.5.0 General . 70 5.3.5.1 Initial conditions . 70 5.3.5.2 Procedures . 70 5.3.5.3 Test requirement . 71 SIST EN 301 908-14 V11.1.2:2017



ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 5 5.3.6 Receiver spurious emissions . 71 5.3.6.0 General . 71 5.3.6.1 Initial conditions . 71 5.3.6.2 Procedure . 72 5.3.6.3 Test requirement . 72 5.3.7 Blocking characteristics . 72 5.3.7.0 General . 72 5.3.7.1 Initial conditions . 72 5.3.7.2 Procedure . 73 5.3.7.3 Test requirement . 73 5.3.8 Receiver intermodulation characteristics . 74 5.3.8.0 General . 74 5.3.8.1 Initial conditions . 74 5.3.8.2 Procedures . 74 5.3.8.3 Test requirement . 74 5.3.9 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 75 5.3.9.0 General . 75 5.3.9.1 Initial conditions . 75 5.3.9.2 Procedure for Adjacent Channel Selectivity . 75 5.3.9.3 Procedure for narrow-band blocking . 75 5.3.9.4 Test requirement . 76 5.3.10 Home BS output power for adjacent UTRA channel protection. 76 5.3.10.1 Initial conditions . 76 5.3.10.2 Procedure . 76 5.3.10.3 Test requirement . 77 5.3.11 Home BS output power for adjacent E-UTRA channel protection . 77 5.3.11.1 Initial conditions . 77 5.3.11.2 Procedure . 77 5.3.11.3 Test requirement . 78 5.3.12 Home BS output power for co-channel E-UTRA protection . 78 5.3.12.1 Initial conditions . 78 5.3.12.2 Procedure . 78 5.3.12.3 Test requirement . 79 5.3.13 Reference sensitivity level . 79 5.3.13.0 General . 79 5.3.13.1 Initial conditions . 79 5.3.13.2 Procedure . 79 5.3.13.3 Test requirement . 80 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 81 Annex B (normative): Base Station configurations . 83 B.1 Reception with multiple receiver antenna connectors, receiver diversity . 83 B.2 Duplexers . 83 B.3 Power supply options . 83 B.4 Ancillary RF amplifiers . 84 B.5 BS using antenna arrays . 84 B.5.0 General . 84 B.5.1 Receiver tests . 85 B.5.2 Transmitter tests . 85 B.6 Transmission with multiple transmitter antenna connectors . 86 B.7 BS with integrated Iuant BS modem . 86 Annex C (informative): Environmental profile specification . 87 Annex D (informative): Bibliography . 88 SIST EN 301 908-14 V11.1.2:2017



ETSI ETSI EN 301 908-14 V11.1.2 (2017-04) 6 Annex E (informative): Change history . 89 History .
...

ETSI EN 301 908-14 V11.1.2 (2017-04)






HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU;
Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA)
Base Stations (BS)

---------------------- Page: 1 ----------------------
2 ETSI EN 301 908-14 V11.1.2 (2017-04)



Reference
REN/MSG-TFES-11-14-RED-C1
Keywords
3G, 3GPP, cellular, digital, E-UTRA, IMT,
IMT-2000, LTE, mobile, radio, regulation, UMTS

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 301 908-14 V11.1.2 (2017-04)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 15
3.3 Abbreviations . 16
4 Technical requirements specifications . 17
4.1 Environmental profile . 17
4.2 Conformance requirements . 17
4.2.1 Introduction. 17
4.2.2 Operating band unwanted emissions . 21
4.2.2.1 Definition . 21
4.2.2.2 Limits . 22
4.2.2.2.0 General . 22
4.2.2.2.1 Limits for Wide Area BS (Bands 1, 3, 8, 32, 33 and 34) . 23
4.2.2.2.2 Limits for Wide Area BS (Bands 7, 22, 38, 40, 42 and 43) . 25
4.2.2.2.3 Limits for Wide Area BS (Band 20 and 28) . 28
4.2.2.2.4 Limits for Local Area BS . 29
4.2.2.2.5 Limits for Home BS . 31
4.2.2.2.6 Limits for protection of DTT . 32
4.2.2.2.7 Limits for protection of adjacent band services . 33
4.2.2.2.8 Limits for Medium Range BS . 33
4.2.2.2.9 Limits for operation in Band 32 . 37
4.2.2.3 Conformance . 38
4.2.3 Adjacent Channel Leakage Power Ratio (ACLR) . 38
4.2.3.1 Definition . 38
4.2.3.2 Void. 39
4.2.3.3 Void. 39
4.2.3.4 Limits . 39
4.2.3.4.1 ACLR Limits . 39
4.2.3.4.2 Cumulative ACLR test requirement in non-contiguous spectrum limits . 40
4.2.3.5 Conformance . 41
4.2.4 Transmitter spurious emis sions . 42
4.2.4.1 Definition . 42
4.2.4.2 Limits . 42
4.2.4.2.1 Spurious emissions . 42
4.2.4.2.2 Co-existence with other systems . 42
4.2.4.2.3 Protection of the BS receiver of own or different BS . 44
4.2.4.2.4 Co-existence with Home BS operating in other bands . 44
4.2.4.3 Conformance . 45
4.2.5 Base Station maximum output power . 45
4.2.5.1 Definition . 45
4.2.5.2 Limit . 46
4.2.5.3 Conformance . 46
4.2.6 Transmitter intermodulation . 46
4.2.6.1 Definition . 46
4.2.6.2 Limit . 46
4.2.6.3 Conformance . 47
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 301 908-14 V11.1.2 (2017-04)
4.2.7 Receiver spurious emissions . 47
4.2.7.1 Definition . 47
4.2.7.2 Limit . 47
4.2.7.3 Conformance . 48
4.2.8 Blocking characteristics . 48
4.2.8.1 Definition . 48
4.2.8.2 Limit . 48
4.2.8.3 Conformance . 51
4.2.9 Receiver intermodulation characteristics . 51
4.2.9.1 Definition . 51
4.2.9.2 Limit . 51
4.2.9.3 Conformance . 55
4.2.10 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 55
4.2.10.1 Definition . 55
4.2.10.2 Limit . 55
4.2.10.3 Conformance . 59
4.2.11 Home BS output power for adjacent UTRA channel protection. 59
4.2.11.1 Definition . 59
4.2.11.2 Limit . 59
4.2.11.3 Conformance . 60
4.2.12 Home BS output power for adjacent E-UTRA channel protection . 60
4.2.12.1 Definition and applicability . 60
4.2.12.2 Limit . 60
4.2.12.3 Conformance . 61
4.2.13 Home BS output power for co-channel E-UTRA protection . 61
4.2.13.1 Definition and applicability . 61
4.2.13.2 Limit . 62
4.2.13.3 Conformance . 63
4.2.14 Reference sensitivity level . 63
4.2.14.1 Definition and applicability . 63
4.2.14.2 Limits . 63
4.2.14.3 Conformance . 64
5 Testing for compliance with technical requirements . 64
5.1 Environmental conditions for testing . 64
5.2 Interpretation of the measurement results . 65
5.3 Essential radio test suites . 66
5.3.0 Introduction. 66
5.3.1 Operating band unwanted emissions . 66
5.3.1.0 General . 66
5.3.1.1 Initial conditions . 66
5.3.1.2 Procedure . 67
5.3.1.3 Test requirement . 67
5.3.2 Adjacent Channel Leakage power Ratio (ACLR) . 67
5.3.2.1 Initial conditions . 67
5.3.2.2 Procedure . 68
5.3.2.3 Test requirement . 68
5.3.3 Transmitter spurious emis sions . 68
5.3.3.0 General . 68
5.3.3.1 Initial conditions . 68
5.3.3.2 Procedure . 69
5.3.3.3 Test requirements . 69
5.3.4 Base Station maximum output power . 69
5.3.4.0 General . 69
5.3.4.1 Initial conditions . 69
5.3.4.2 Procedure . 70
5.3.4.3 Test requirement . 70
5.3.5 Transmitter intermodulation . 70
5.3.5.0 General . 70
5.3.5.1 Initial conditions . 70
5.3.5.2 Procedures . 70
5.3.5.3 Test requirement . 71
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 301 908-14 V11.1.2 (2017-04)
5.3.6 Receiver spurious emissions . 71
5.3.6.0 General . 71
5.3.6.1 Initial conditions . 71
5.3.6.2 Procedure . 72
5.3.6.3 Test requirement . 72
5.3.7 Blocking characteristics . 72
5.3.7.0 General . 72
5.3.7.1 Initial conditions . 72
5.3.7.2 Procedure . 73
5.3.7.3 Test requirement . 73
5.3.8 Receiver intermodulation characteristics . 74
5.3.8.0 General . 74
5.3.8.1 Initial conditions . 74
5.3.8.2 Procedures . 74
5.3.8.3 Test requirement . 74
5.3.9 Adjacent Channel Selectivity (ACS) and narrow-band blocking . 75
5.3.9.0 General . 75
5.3.9.1 Initial conditions . 75
5.3.9.2 Procedure for Adjacent Channel Selectivity . 75
5.3.9.3 Procedure for narrow-band blocking . 75
5.3.9.4 Test requirement . 76
5.3.10 Home BS output power for adjacent UTRA channel protection. 76
5.3.10.1 Initial conditions . 76
5.3.10.2 Procedure . 76
5.3.10.3 Test requirement . 77
5.3.11 Home BS output power for adjacent E-UTRA channel protection . 77
5.3.11.1 Initial conditions . 77
5.3.11.2 Procedure . 77
5.3.11.3 Test requirement . 78
5.3.12 Home BS output power for co-channel E-UTRA protection . 78
5.3.12.1 Initial conditions . 78
5.3.12.2 Procedure . 78
5.3.12.3 Test requirement . 79
5.3.13 Reference sensitivity level . 79
5.3.13.0 General . 79
5.3.13.1 Initial conditions . 79
5.3.13.2 Procedure . 79
5.3.13.3 Test requirement . 80
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 81
Annex B (normative): Base Station configurations . 83
B.1 Reception with multiple receiver antenna connectors, receiver diversity . 83
B.2 Duplexers . 83
B.3 Power supply options . 83
B.4 Ancillary RF amplifiers . 84
B.5 BS using antenna arrays . 84
B.5.0 General . 84
B.5.1 Receiver tests . 85
B.5.2 Transmitter tests . 85
B.6 Transmission with multiple transmitter antenna connectors . 86
B.7 BS with integrated Iuant BS modem . 86
Annex C (informative): Environmental profile specification . 87
Annex D (informative): Bibliography . 88
ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 301 908-14 V11.1.2 (2017-04)
Annex E (informative): Change history . 89
History . 90


ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 301 908-14 V11.1.2 (2017-04)
Intellectual Property Rights
IPRs essential or potentially essential to the presen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.