ETSI EN 303 978 V1.1.2 (2013-02)
Satellite Earth Stations and Systems (SES); Harmonized EN for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE Directive
Satellite Earth Stations and Systems (SES); Harmonized EN for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE Directive
DEN/SES-00324
Satelitske zemeljske postaje in sistemi (SES) - Harmonizirani EN za zemeljske postaje na mobilnih platformah, ki oddajajo proti satelitom v geostacionarni orbiti v pasovih od 27,5 GHz do 30,0 GHz, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Ta dokument se uporablja za zemeljske postaje na mobilnih platformah (ESOMP) z naslednjimi značilnostmi.
• Zemeljska postaja na mobilni platformi je izdelana za mobilno in stacionarno delovanje.
• Zemeljska postaja na mobilni platformi deluje na različnih mobilnih platformah, npr. na vlakih, morskih plovilih, letalih in drugih vozilih, pri čemer lahko pride do občasnih motenj in prekinitev v satelitski povezavi.
• Zemeljska postaja na mobilni platformi deluje kot del satelitskega omrežja (npr. zvezdnega, mrežnega ali od točke do točke), ki se uporablja za distribucijo in/ali izmenjavo informacij.
• Zemeljska postaja na mobilni platformi je sestavljena iz vse opreme, električne in mehanske, od same antene do vmesnikov z drugo komunikacijsko opremo na mobilni platformi (običajno se imenujejo zemeljski vmesniki).
• Frekvence oddajanja in sprejemanja so prikazane v preglednici 1.
• Zemeljska postaja na mobilni platformi oddaja na frekvenci od 27,50 GHz do 30,00 GHz – to je pas, ki je med drugimi storitvami dodeljen fiksnim satelitskim storitvam (FSS) (Zemlja–vesolje). Vendar naj bi bilo delovanje zemeljske postaje na mobilni platformi omejeno na frekvenčni obseg 29,50 GHz do 30,00 GHz v državah in v bližini držav, ki so fiksne storitve (FS) dodelile drugim frekvenčnim obsegom. Lokalni predpisi lahko dovolijo delovanje v teh frekvenčnih obsegih.
• Zemeljska postaja na mobilni platformi sprejema v eni ali več frekvencah v obsegu od 17,30 GHz do 20,20 GHz (fiksne satelitske storitve).
• Zemeljska postaja na mobilni platformi uporablja linearno ali krožno polarizacijo.
• Zemeljska postaja na mobilni platformi deluje prek geostacionarnega satelita (ali skupine skupno nameščenih geostacionarnih satelitov), ki je od katerega koli drugega geostacionarnega satelita, ki deluje na istih frekvencah ter na istem
območju pokritja, oddaljen vsaj za 2°. OPOMBA 1: Zemeljske postaje na mobilni platformi lahko delujejo s sateliti, ki so medsebojno bližje od 2°, z dodatnimi omejitvami delovanja, ki niso zajete v tem dokumentu.
• Zemeljska postaja na mobilni platformi je izdelana za nenadzorovano delovanje.
•Zemeljska postaja na mobilni platformi se krmili in spremlja z napravo za krmiljenje omrežja (NCF). Ta funkcija se lahko izvaja centralno (npr. za omrežje zemeljskih postaj na mobilni platformi s centralnim vozliščem) ali pa se lahko izvaja v sami zemeljski postaji na mobilni platformi za avtonomno krmiljenje. Naprava za krmiljenje omrežja ne spada na področje uporabe tega dokumenta. Ta dokument se uporablja za zemeljsko postajo na mobilni platformi s pomožno opremo in različnimi telekomunikacijskimi vrati, ko ta deluje znotraj mejnih vrednosti obratovalnega okoljskega profila, kot ga z izjavo določi kandidat, ter ko je nameščena v skladu z zahtevami kandidatove izjave ali v skladu z zahtevami dokumentacije uporabnika. Ta dokument zajema določbe člena 3.2 Direktive 1999/5/ES [i.2] (direktive R&TTE), ki navaja, da »[...] mora biti radijska oprema skonstruirana tako, da učinkovito uporablja spekter, razporejen za prizemne/vesoljske radijske komunikacije in orbitalne vire, tako da ne pride do škodljivega motenja.«
OPOMBA 2: Obratovalne zahteve določajo nacionalne uprave in ustrezni sklepi Odbora za elektronske komunikacije. Poleg tega dokumenta se lahko za opremo na področju uporabe tega dokumenta uporabljajo tudi drugi standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov člena 3 Direktive 1999/5/ES [i.2] (Direktive R&TTE).
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.577(Satellite Earth Stations and Systems (SES) - Harmonized EN for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE Directive33.060.30Radiorelejni in fiksni satelitski komunikacijski sistemiRadio relay and fixed satellite communications systemsICS:Ta slovenski standard je istoveten z:EN 303 978 Version1.1.0SIST EN 303 978 V1.1.2:2013en01-maj-2013SIST EN 303 978 V1.1.2:2013SLOVENSKI
STANDARD
SIST EN 303 978 V1.1.2:2013
ETSI EN 303 978 V1.1.2 (2013-02) Satellite Earth Stations and Systems (SES); Harmonized EN for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE Directive
Harmonized European Standard SIST EN 303 978 V1.1.2:2013
ETSI ETSI EN 303 978 V1.1.2 (2013-02) 2
Reference DEN/SES-00324 Keywords antenna, earth station, GSO, mobile, regulation, satellite ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 303 978 V1.1.2:2013
ETSI ETSI EN 303 978 V1.1.2 (2013-02) 3 Contents Intellectual Property Rights . 7 Foreword . 7 Introduction . 7 1 Scope . 9 2 References . 10 2.1 Normative references . 10 2.2 Informative references . 11 3 Definitions, symbols and abbreviations . 11 3.1 Definitions . 11 3.2 Symbols . 13 3.3 Abbreviations . 13 4 Technical requirements specifications . 14 4.1 General . 14 4.1.1 Environmental profile . 14 4.1.2 Operational configurations . 14 4.1.3 Determination of geographic location of the ESOMP . 14 4.1.4 EIRPAggregate for networks of ESOMPs . 15 4.1.5 Presentation of equipment for testing purposes . 15 4.1.6 Choice of model for testing . 15 4.1.7 Mechanical and electrical design . 15 4.1.7.1 Marking (equipment identification) . 15 4.1.7.2 Equipment identification . 15 4.2 Conformance requirements . 16 4.2.1 Off-axis spurious radiation . 16 4.2.1.1 Justification . 16 4.2.1.2 Specification. 16 4.2.1.3 Conformance tests . 17 4.2.2 On-axis spurious radiation . 17 4.2.2.1 Justification . 17 4.2.2.2 Specification. 17 4.2.2.2.1 "Carrier-on" radio state . 17 4.2.2.2.2 "Carrier-off" and "Emissions disabled" radio states . 17 4.2.2.3 Conformance tests . 18 4.2.3 Off-axis EIRP emission density within the band . 18 4.2.3.1 Justification . 18 4.2.3.2 Co-polarized Specification . 18 4.2.3.3 Void. 18 4.2.3.4 Cross-polarization Specification . 18 4.2.3.5 Burst Transmission Specification . 19 4.2.3.6 Off-axis Geometry Specification . 19 4.2.3.7 Conformance tests . 20 4.2.4 Uplink Power Control Specification . 20 4.2.5 Carrier suppression . 20 4.2.5.1 Justification . 20 4.2.5.2 Specification. 20 4.2.5.3 Conformance tests . 20 4.2.6 Antenna pointing and polarization alignment . 20 4.2.6.1 Antenna pointing accuracy . 20 4.2.6.1.1 Purpose . 20 4.2.6.1.2 Pointing accuracy specification . 20 4.2.6.1.3 On-axis cross polarization isolation specification . 21 4.2.6.1.4 Conformance tests . 21 4.2.6.2 Antenna Pointing Error Detection . 21 SIST EN 303 978 V1.1.2:2013
ETSI ETSI EN 303 978 V1.1.2 (2013-02) 4 4.2.6.2.1 Pointing error detection specification . 21 4.2.6.2.2 Polarization angle alignment specification . 21 4.2.6.2.3 Conformance tests . 22 4.2.7 Cessation of emissions . 22 4.2.7.1 Justification . 22 4.2.7.2 Specification. 22 4.2.7.2.1 Specification 1: Mode of cessation of emissions . 22 4.2.7.2.2 Specification 2: Conditions under which the ESOMP shall cease emissions . 22 4.2.7.2.3 Specification 3: Cessation of emissions . 23 4.2.7.2.4 Specification 4: Fault conditions . 23 4.2.7.3 Conformance tests . 23 4.2.8 Identification of the ESOMP . 23 4.2.8.1 Justification . 23 4.2.8.2 Specification. 23 4.2.8.3 Conformance tests . 23 4.2.9 Control and Monitoring Functions (CMFs) . 24 4.2.9.1 ESOMP States . 24 4.2.9.1.1 CMF state diagram . 25 4.2.9.2 Processor monitoring . 26 4.2.9.2.1 Justification . 26 4.2.9.2.2 Specification . 26 4.2.9.2.3 Conformance tests . 27 4.2.9.3 Transmit subsystem monitoring . 27 4.2.9.3.1 Justification . 27 4.2.9.3.2 Specification . 27 4.2.9.3.3 Conformance tests . 27 4.2.9.4 Power-on/Reset . 27 4.2.9.4.1 Justification . 27 4.2.9.4.2 Specification . 27 4.2.9.4.3 Conformance tests . 27 4.2.9.5 Control Channel (CC) and Response Channel (RC) . 27 4.2.9.5.1 Justification . 27 4.2.9.5.2 Specification . 28 4.2.9.5.3 Conformance tests . 28 4.2.9.6 Network control commands . 28 4.2.9.6.1 Justification . 28 4.2.9.6.2 Specification . 29 4.2.9.6.3 Conformance tests . 29 4.2.9.7 Initial burst transmission . 29 4.2.9.7.1 Justification . 29 4.2.9.7.2 Specification . 29 4.2.9.7.3 Conformance tests . 29 4.2.9.8 Inhibition of transmissions . 30 4.2.9.8.1 Justification . 30 4.2.9.8.2 Specification . 30 4.2.9.8.3 Conformance tests . 30 5 Testing for compliance with technical requirements . 30 5.1 Environmental conditions for testing . 30 5.2 Essential radio test suites . 30 6 Test methods for all aspects of the ESOMP . 30 6.1 General . 30 6.1.1 Interpretation of measurement results . 31 6.1.2 Measuring receiver . 32 6.2 Off-axis spurious radiation . 32 6.2.1 Test method . 33 6.2.1.1 General . 33 6.2.1.2 Multi-carrier operation . 33 6.2.2 Measurements up to 1 000 MHz . 34 6.2.2.1 Test site . 34 6.2.2.2 Measuring receivers . 34 SIST EN 303 978 V1.1.2:2013
ETSI ETSI EN 303 978 V1.1.2 (2013-02) 5 6.2.2.3 Procedure . 34 6.2.3 Measurements above 1 000 MHz . 34 6.2.3.1 Identification of the significant frequencies of spurious radiation . 35 6.2.3.1.1 Test site. 35 6.2.3.1.2 Procedure . 35 6.2.3.2 Measurement of radiated power levels of identified spurious radiation . 35 6.2.3.2.1 Test site. 35 6.2.3.2.2 Procedure . 35 6.2.3.3 Measurement of conducted spurious radiation at the antenna flange . 36 6.2.3.3.1 Test site. 36 6.2.3.3.2 Procedure . 37 6.3 On-axis spurious radiation . 37 6.3.1 Test method . 37 6.3.1.1 Test site . 37 6.3.1.2 Method of measurement . 37 6.3.1.2.1 General . 37 6.3.1.2.2 Method of measurement at the antenna flange . 38 6.3.1.2.3 Method of measurement for an EUT with antenna . 38 6.4 Off-axis EIRP emission density within the band . 39 6.4.1 Test method . 39 6.4.1.1 Transmit output power density . 40 6.4.1.1.1 General . 40 6.4.1.1.2 Test site. 40 6.4.1.1.3 Method of measurement . 40 6.4.1.2 Antenna transmit gain . 41 6.4.1.2.1 General . 41 6.4.1.2.2 Test site. 41 6.4.1.2.3 Method of measurement . 41 6.4.1.3 Antenna transmit radiation patterns . 42 6.4.1.3.1 General . 42 6.4.1.3.2 Test site. 42 6.4.1.3.3 Test arrangement . 43 6.4.1.3.4 Co-polar radiation pattern - azimuth . 43 6.4.1.3.5 Co-polar radiation pattern - elevation . 43 6.4.1.3.6 Cross-polar radiation pattern - azimuth . 44 6.4.1.3.7 Cross-polar radiation pattern - elevation . 44 6.4.2 Computation of results . 45 6.5 Carrier suppression . 45 6.5.1 Test method . 45 6.6 Antenna pointing . 45 6.6.1 General . 45 6.6.2 Test method . 46 6.7 Polarization angle alignment capability . 46 6.7.1 Test method . 46 6.8 Cessation of emissions of the ESOMP . 46 6.8.1 Test Method . 46 6.8.1.1 Required documentation . 46 6.8.1.2 Cessation of emissions from the "Transmission enabled" state . 47 6.8.1.3 Cessation of emission from the "Transmission disabled" state . 47 6.8.1.4 Cessation of emission from the "Initial Phase" state . 47 6.8.1.4.1 EUTs transmitting initial bursts . 47 6.8.1.4.2 EUTs not transmitting initial bursts . 48 6.8.1.5 "Single action" means of cessation of emissions. 48 6.8.1.6 Fault conditions . 49 6.9 Identification of ESOMP . 49 6.9.1 Test arrangement . 49 6.9.2 Test method . 49 6.10 Control and monitoring functions . 49 6.10.1 Test arrangement . 49 6.10.2 Processor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.