iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62321-3-2:2013

(Main)

Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography

Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography

IEC 62321-3-2:2013 specifies the screening analysis of the total bromine (Br) in homogeneous materials found in polymers and electronics by using the analytical technique of combustion ion chromatography (C-IC).
It has the status of a horizontal standard in accordance with IEC Guide 108.

Détermination de certaines substances dans les produits électrotechniques - Partie 3-2: Méthodes d'essai - Brome total dans les polymères et les produits électriques par Combustion - Chromatographie d'ionisation

La CEI 62321-3-2:2013 définit l'analyse par détection du brome total (Br) dans des matériaux homogènes que l'on trouve dans les polymères et les produits électroniques en utilisant la technique analytique de combustion de la chromatographie d'ionisation (C-IC).
Elle a le statut de norme horizontale conformément au Guide IEC 108.

General Information

Status
Published
Publication Date
18-Jun-2013
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
13.020.01 - Environment and environmental protection in general
43.040.10 - Electrical and electronic equipment
Technical Committee
TC 111 - Environmental standardization for electrical and electronic products and systems
Drafting Committee
WG 3 - TC 111/WG 3
Current Stage
DELPUB - Deleted Publication
Completion Date
30-Jun-2020
Ref Project

Relations

Revised
IEC 62321-3-2:2020 - Determination of certain substances in electrotechnical products - Part 3-2: Screening - Fluorine, bromine and chlorine in polymer and electronics by combustion-ion chromatography (C-IC)
Effective Date
05-Sep-2023

Buy Standard

IEC 62321-3-2:2013 - Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by combustion - Ion chromatographyIEC 62321-3-2:2013 - Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by combustion - Ion chromatography
PreviousNext
Standard
IEC 62321-3-2:2013 - Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by combustion - Ion chromatography
English and French language
64 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62321-3-2
®

Edition 1.0 2013-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
HORIZONTAL STANDARD
NORME HORIZONTALE


Determination of certain substances in electrotechnical products –
Part 3-2: Screening – Total bromine in polymers and electronics by Combustion –
Ion Chromatography

Détermination de certaines substances dans les produits électrotechniques –
Partie 3-2: Méthodes d'essai – Brome total dans les polymères et les produits
électriques par Combustion – Chromatographie d'Ionisation

IEC 62321-3-2:2013

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2013 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:

Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.

---------------------- Page: 2 ----------------------
IEC 62321-3-2

®


Edition 1.0 2013
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62321-3-2:2020(Main)
Determination of certain substances in electrotechnical products - Part 3-2: Screening - Fluorine, bromine and chlorine in polymer and electronics by combustion-ion chromatography (C-IC)

IEC 62321-3-2:2020 is available as IEC 62321-3-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62321-3-2:2020 specifies the screening analysis of fluorine, chlorine and bromine in polymers and electronics using combustion-ion chromatography (C-IC). IEC 62321-3-2:2020 cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) In the previous edition, a screening test method for bromine (Br) content only was provided. In this edition, a screening test method by C-IC for fluorine (F), chlorine (Cl) and bromine (Br) has been added to the normative part of the document.
b) A screening test method by C-IC for iodine (I) has been added in Annex D (informative).
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    90 pages
    English and French language
    sale 15% off
IEC
IEC 62321-10:2020(Main)
Determination of certain substances in electrotechnical products - Part 10: Polycyclic aromatic hydrocarbons (PAHs) in polymers and electronics by gas chromatography-mass spectrometry (GC-MS)

IEC 62321-10:2020 specifies one normative technique for the determination of polycyclic aromatic hydrocarbons (PAHs) in polymers of electrotechnical products. These PAHs can especially be found in the plastic and rubber parts of a wide range of consumer articles. They are present as impurities in some of the raw materials used in the production of such articles, in particular in extender oils and in carbon black. They are not added intentionally to the articles and do not perform any specific function as constituents of the plastic or rubber parts.
The gas chromatography-mass spectrometry (GC MS) test method is suitable for the determination of polycyclic aromatic hydrocarbons (PAHs).
These test methods have been evaluated for use with plastics and rubbers. These test methods have been evaluated for use with ABS (acrylonitrile butadiene styrene) containing individual PAHs ranging from 37,2 mg/kg to 119 mg/kg and rubbers containing individual PAHs ranging from 1 mg/kg to 221,2 mg/kg.
WARNING – This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This horizontal standard is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108.
One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard will not apply unless specifically referred to or included in the relevant publications.

  • Standard
    61 pages
    English and French language
    sale 15% off
IEC
IEC 62321-7-1:2015(Main)
Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method

IEC 62321-7-1:2015 describes a boiling water extraction procedure intended to provide a qualitative determination of the presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protection coatings on metallic samples. In this procedure, when Cr(VI) in a sample is detected below the 0,10 g/cm2 LOQ (limit of quantification), the sample is considered to be negative for Cr(VI). Since Cr(VI) may not be uniformly distributed in the coating even within the same sample batch, a "grey zone" between 0,10 g/cm2 and 0,13 g/cm2 has been established as "inconclusive" to reduce inconsistent results due to unavoidable coating variations. In this case, additional testing may be necessary to confirm the presence of Cr(VI). When Cr(VI) is detected above 0,13 g/cm2, the sample is considered to be positive for the presence of Cr(VI) in the coating layer.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    37 pages
    English and French language
    sale 15% off
IEC
IEC 62321-6:2015(Main)
Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatograhy -mass spectometry (GC-MS)

IEC 62321-6:2015 specifies one normative and two informative techniques for the determination of polybrominated biphenyls (PBB) and diphenyl ethers (PBDE) in polymers of electrotechnical products. The test methods are:
- The gas chromatography-mass spectrometry (GC-MS);
- The ion attachment mass spectrometry (IAMS) technique and
- The high-pressure liquid chromatography technique. This first edition of IEC 62321-6 is a partial replacement of IEC 62321:2008, forming a structural revision and generally replacing Annex A.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    116 pages
    English and French language
    sale 15% off
IEC
IEC 62321-5:2013(Main)
Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS

IEC 62321-5:2013 describes the four test methods for lead, cadmium and chromium in polymers, metals and electronics, namely AAS (atomic absorption spectrometry), AFS (atomic fluorescence spectrometry), ICP-OES (inductively coupled plasma optical emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry) as well as several procedures for preparing the sample solution from which the most appropriate method of analysis can be selected by experts.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    75 pages
    English and French language
    sale 15% off
IEC
IEC 62321-2:2013(Main)
Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation

IEC 62321-2:2013 provides strategies of sampling along with the mechanical preparation of samples from electrotechnical products, electronic assemblies and electronic components. These samples can be used for analytical testing to determine the levels of certain substances as described in the test methods in other parts of IEC 62321. Restrictions for substances will vary between geographic regions and from time to time. This Standard describes a generic process for obtaining and preparing samples prior to the determination of any substance which are under concern.
IEC 62321-2:2013 has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    126 pages
    English and French language
    sale 15% off
IEC
IEC 62321-3-1:2013(Main)
Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry

IEC 62321-3-1:2013 describes the screening analysis of five substances, specifically lead (Pb), mercury (Hg), cadmium (Cd), total chromium (Cr) and total bromine (Br) in uniform materials found in electrotechnical products, using the analytical technique of X-ray fluorescence (XRF) spectrometry.
IEC 62321-3-1:2013 has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    82 pages
    English and French language
    sale 15% off
IEC
IEC 62321-4:2013(Main)
Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS

IEC 62321-4:2013 describes the use of four test methods for mercury in polymers, metals and electronics, namely CV-AAS (cold vapour atomic absorption spectrometry), CV-AFS (cold vapour atomic fluorescence spectrometry) ICP-OES (inductively coupled plasma optical emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry) as well as several procedures for preparing the sample solution from which the most appropriate method of analysis can be selected by experts.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    51 pages
    English and French language
    sale 15% off
IEC
IEC 62321-1:2013(Main)
Determination of certain substances in electrotechnical products - Part 1: Introduction and overview

IEC 62321-1:2013 refers to the sample as the object to be processed and measured. The nature of the sample and the manner in which it is acquired is defined by the entity carrying out the tests and not by this standard. It provides guidance on the disassembly procedure employed for obtaining a sample. This first edition of IEC 62321-1 is a partial replacement of IEC 62321, forming a structural revision and replacing Clauses 1 to 4.
IEC 62321-1:2013 has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    34 pages
    English and French language
    sale 15% off
IEC
IEC TR 62476:2010(Main)
Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products

IEC/TR 62476:2010(E) provides a framework for the use of internationally accepted standards, tools and practices to evaluate electrical and electronic products with respect to restricted substances. It can also be applied to declarable substances which are not restricted in electrical and electronic products. It provides guidance on how technical documentation and relevant evaluation and control methods should be selected and applied for restricted or declarable substances of any producer's product.

  • Technical report
    19 pages
    English language
    sale 15% off