IEC 61300-2-1:2009/COR1:2010
(Corrigendum)Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
Corrigendum 1 - Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-1: Essais - Vibrations (sinusoïdales)
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61300-2-1 CEI 61300-2-1
(3rd edition – 2009) (3ème édition – 2009)
Fibre optic interconnecting devices and passive
Dispositifs d’interconnexion et composants
components – Basic test and measurement
passifs à fibres optiques – Méthodes
procedures –
fondamentales d’essais et de mesures –
Part 2-1: Tests – Vibration (sinusoidal)
Partie 2-1 : Essais – Vibrations (sinusoïdales)
C O R R I G E N D U M 1
Page 8 Page 16
Replace the existing Tables 1 and 2 with the Remplacer les Tableaux 1 et 2 existants par les
following new Tables 1 and 2: nouveaux Tableaux 1 et 2 suivants:
Table 1 – Connectors and passive components
Category Parameter Value
Categories C, U and E Frequency range 10 Hz– 55 Hz
Sweep rate 1 oct/min
Number of sweeps 15/axis
Amplitude 0,75 mm
Category O Frequency range 10 Hz – 55 Hz
Sweep rate 1 oct/min for passive
components
45 Hz/min for connectors
Duration 2 h/axis
Amplitude 1,52 mm for passive
components
0,75 mm for connectors
Table 2 – Fibre management systems and closures
Category Parameter Val
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.