IEC 60974-14:2018/COR1:2022
(Corrigendum)Corrigendum 1 - Arc welding equipment - Part 14: Calibration, validation and consistency testing
Corrigendum 1 - Arc welding equipment - Part 14: Calibration, validation and consistency testing
Corrigendum 1 - Matériel de soudage à l'arc - Partie 14: Etalonnage, validation et essais de consistance
General Information
Relations
Standards Content (Sample)
IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 60974-14 IEC 60974-14
Edition 1.0 2018-10 Édition 1.0 2018-10
Arc welding equipment – Matériel de soudage à l’arc –
Part 14: Calibration, validation and consistency Partie 14: Etalonnage, validation et essais de
testing consistance
CO RRI G E NDUM 1
7.2.3 Test load 7.2.3 Charge d’essai
Replace the first paragraph of this Remplacer le premier alinéa de ce
subclause with the following: paragraphe par ce qui suit :
The power source should be loaded with a Il convient que la source d'alimentation soit
conventional load in accordance with chargée avec une charge conventionnelle
IEC 60974-1 depending o
...
This May Also Interest You
IEC 62822-3:2023 applies to equipment for resistance welding and allied processes designed for occupational use by professionals and for use by laymen.
More generally, this document covers equipment for which the welding current flows in an electrical circuit whose geometry cannot be changed and regardless of the technology of the current generator (for example LF-AC, MF-DC for spot or seam welding or capacitive discharge used for stud welding).
This second edition cancels and replaces the first edition published in 2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) inclusion of the uncertainties in the results of the assessment;
b) simplification of the methods of exposure assessment.
- Standard137 pagesEnglish and French languagesale 15% off
IEC 60974-12:2022 is applicable to coupling devices for cables used in arc welding and allied processes, designed for connection and disconnection without using tools. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- updated Table 1 to include 100 % duty cycle;
- updated Annex A to provide more detail.
- Standard50 pagesEnglish languagesale 15% off
- Standard33 pagesEnglish and French languagesale 15% off
IEC 60974-1:2021 is applicable to power sources for arc welding and allied processes designed for industrial and professional use, and supplied by a voltage not exceeding 1 000 V, battery supplied or driven by mechanical means. This document specifies safety and performance requirements of welding power sources and plasma cutting systems. This sixth edition cancels and replaces the fifth edition published in 2017 and Amendment 1:2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Table 1 with an alphabetical cross-reference listing of terms added;
- clearance and creepage distance reference document changed to IEC 60664-1:2020;
- 6.1.2 and 6.1.3 modified to follow IEC 60664-1 basic insulation dimensioning for mains supply with rationalized voltages;
- abnormal capacitor test of 6.2.2 moved to new Subclause 9.5;
- 6.2.5 and 6.3.6 modified to use touch current measuring network weighted for letgo-immobilization and supply voltage tolerance requirement added;
- 16.3 new structure and accuracy requirement for displayed voltage value ;
- Annex A changed to normative and Table A.2 and Table A.3 added;
- Annex L editorial update to standardized symbols;
- redraft of efficiency and idle state power measurement in Annex M based on IEC 62301:2011;
- Annex N measurement network weighted for letgo-immobilization added.
- Standard475 pagesEnglish languagesale 15% off
- Standard316 pagesEnglish and French languagesale 15% off
IEC 60974-8:2021 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. The gas console can be external or internal to the power source enclosure. In the latter case, the power source shall meet the requirements of both IEC 60974-1 and this document. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are the following:
- changes induced by the publication of IEC 60974-1:2017;
- requirements for the rating plate as in IEC 60974-1:2017, Clause 15;
- requirements for the instructions in 13.2.
This part of IEC 60974 is to be used in conjunction with IEC 60974-1.
- Standard58 pagesEnglish languagesale 15% off
- Standard38 pagesEnglish and French languagesale 15% off
IEC 60974-11:2021 is applicable to electrode holders for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to electrode holders for underwater welding. This document specifies safety and performance requirements of electrode holders. This fourth edition cancels and replaces the third edition, published in 2010. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are the following:
- Modify 3.6 type A to category A;
- Modify 3.7 type B to category B;
- Modify 8.1 to clarify reference to IEC 60529;
- Modification of 10.1 for clarification purposes;
- Added Bibliography.
This part of IEC 60974 is to be used in conjunction with IEC 60974-1.
- Standard14 pagesEnglish languagesale 15% off
- Standard29 pagesEnglish languagesale 15% off
- Standard27 pagesEnglish and French languagesale 15% off
IEC 60974-13:2021 is applicable to welding current return clamps for arc welding processes, designed to make an electrical connection to the workpiece without using tools. This document is not applicable to welding current return clamps for underwater welding and plasma cutting.
This document specifies safety and performance requirements of welding current return clamps. This document does not specify requirements for welding cables. This second edition cancels and replaces the first edition, published in 2011, and constitutes a technical revision.
The significant technical changes with respect to the previous edition are the following:
- Modified the title from "Welding clamp" to "Welding current return clamp" and updated the term through the document.
- Updated all values of test current in Table 1 corrected to 40 °C.
- Updated the reference to EN 50565-1:2014, Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) – Part 1: General guidance
This part of IEC 60974 is to be used in conjunction with IEC 60974-1.
- Standard11 pagesEnglish languagesale 15% off
- Standard23 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
IEC 60974-10:2020 is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems, arc striking and stabilizing devices and chargers for battery powered equipment. This fourth edition cancels and replaces the third edition published in 2014 and its Amendment 1:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- updated normative references;
- requirements for battery powered equipment;
- requirements for equipment combined with radio transmitters/receivers.
- Standard120 pagesEnglish languagesale 15% off
- Standard77 pagesEnglish and French languagesale 15% off
IEC 62135-2:2020 is available as IEC 62135-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62135-2:2020 is applicable to equipment for resistance welding and allied processes which are connected to mains supplies with rated voltages up to 1 000 V AC RMS. This document does not define safety requirements. This third edition cancels and replaces the second edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- update of the applicable limits related to the updated references;
- implementation of radiated magnetic field requirements.
- Standard92 pagesEnglish languagesale 15% off
- Standard58 pagesEnglish and French languagesale 15% off
IEC 60974-7:2019 specifies safety and construction requirements for torches used for arc welding and allied processes. This document is applicable to manual, mechanically guided, air-cooled, liquid-cooled, motorized, spool-on and fume extraction torches.
This fourth edition cancels and replaces the third edition published in 2013 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) definitions 3.11 and 3.20 were revised;
b) requirements for arc striking and stabilizing voltage rating have been added to the sequence of type tests (see 6.2);
c) the AC test voltage requirement for torches that utilize arc striking and stabilizing voltageshas been revised (see 7.5.2);
d) the test configuration of isolated circuits for torches that utilize arc striking and stabilizing voltages has been revised (see 7.5.2);
e) the metal tube used for the heating tests has additional allowable means of cooling methods (see 8.3.2 and 8.3.5);
f) for fume extraction torches, the instructions for use include additional information (see Clause 13, item i)).
This document is to be used in conjunction with IEC 60974-1:2017.
- Standard62 pagesEnglish and French languagesale 15% off
IEC 60974-5:2019 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire.
This document is applicable to wire feeders and to wire-feed controls that are stand-alone (separate from the welding equipment), housed together in a single enclosure or housed in a single enclosure with other welding equipment. The wire feeder can be suitable for manually or mechanically guided torches.
This fourth edition cancels and replaces the third edition published in 2013 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- changes induced by the publication of IEC 60974-1:2017;
- addition of requirements for welding circuit connections in 6.9;
- clarification of requirements and conformity in 6.3.1;
- clarification of thermal requirements in Clause 9;
- addition of requirements in relation to abnormal operation in Clause 10.
This International Standard is to be used in conjunction with IEC 60974-1:2017.
- Standard45 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.