TC 26 - Electric welding

IEC 62822-3:2023 applies to equipment for resistance welding and allied processes designed for occupational use by professionals and for use by laymen.
More generally, this document covers equipment for which the welding current flows in an electrical circuit whose geometry cannot be changed and regardless of the technology of the current generator (for example LF-AC, MF-DC for spot or seam welding or capacitive discharge used for stud welding).
This second edition cancels and replaces the first edition published in 2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) inclusion of the uncertainties in the results of the assessment;
b) simplification of the methods of exposure assessment.

IEC 60974-12:2022 is applicable to coupling devices for cables used in arc welding and allied processes, designed for connection and disconnection without using tools. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- updated Table 1 to include 100 % duty cycle;
- updated Annex A to provide more detail.

IEC 60974-1:2021 is applicable to power sources for arc welding and allied processes designed for industrial and professional use, and supplied by a voltage not exceeding 1 000 V, battery supplied or driven by mechanical means. This document specifies safety and performance requirements of welding power sources and plasma cutting systems. This sixth edition cancels and replaces the fifth edition published in 2017 and Amendment 1:2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Table 1 with an alphabetical cross-reference listing of terms added;
- clearance and creepage distance reference document changed to IEC 60664-1:2020;
- 6.1.2 and 6.1.3 modified to follow IEC 60664-1 basic insulation dimensioning for mains supply with rationalized voltages;
- abnormal capacitor test of 6.2.2 moved to new Subclause 9.5;
- 6.2.5 and 6.3.6 modified to use touch current measuring network weighted for letgo-immobilization and supply voltage tolerance requirement added;
- 16.3 new structure and accuracy requirement for displayed voltage value ;
- Annex A changed to normative and Table A.2 and Table A.3 added;
- Annex L editorial update to standardized symbols;
- redraft of efficiency and idle state power measurement in Annex M based on IEC 62301:2011;
- Annex N measurement network weighted for letgo-immobilization added.

IEC 60974-8:2021 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. The gas console can be external or internal to the power source enclosure. In the latter case, the power source shall meet the requirements of both IEC 60974-1 and this document. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are the following:
- changes induced by the publication of IEC 60974-1:2017;
- requirements for the rating plate as in IEC 60974-1:2017, Clause 15;
- requirements for the instructions in 13.2.
This part of IEC 60974 is to be used in conjunction with IEC 60974-1.

IEC 60974-13:2021 is applicable to welding current return clamps for arc welding processes, designed to make an electrical connection to the workpiece without using tools. This document is not applicable to welding current return clamps for underwater welding and plasma cutting.
This document specifies safety and performance requirements of welding current return clamps. This document does not specify requirements for welding cables. This second edition cancels and replaces the first edition, published in 2011, and constitutes a technical revision.
The significant technical changes with respect to the previous edition are the following:
- Modified the title from "Welding clamp" to "Welding current return clamp" and updated the term through the document.
- Updated all values of test current in Table 1 corrected to 40 °C.
- Updated the reference to EN 50565-1:2014, Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) – Part 1: General guidance
This part of IEC 60974 is to be used in conjunction with IEC 60974-1.

IEC 60974-11:2021 is applicable to electrode holders for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to electrode holders for underwater welding. This document specifies safety and performance requirements of electrode holders. This fourth edition cancels and replaces the third edition, published in 2010. This edition constitutes a technical revision. The significant technical changes with respect to the previous edition are the following:
- Modify 3.6 type A to category A;
- Modify 3.7 type B to category B;
- Modify 8.1 to clarify reference to IEC 60529;
- Modification of 10.1 for clarification purposes;
- Added Bibliography.
This part of IEC 60974 is to be used in conjunction with IEC 60974-1.

IEC 60974-10:2020 is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems, arc striking and stabilizing devices and chargers for battery powered equipment. This fourth edition cancels and replaces the third edition published in 2014 and its Amendment 1:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- updated normative references;
- requirements for battery powered equipment;
- requirements for equipment combined with radio transmitters/receivers.

IEC 62135-2:2020 is applicable to equipment for resistance welding and allied processes which are connected to mains supplies with rated voltages up to 1 000 V AC RMS. This document does not define safety requirements. This third edition cancels and replaces the second edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- update of the applicable limits related to the updated references;
- implementation of radiated magnetic field requirements.

IEC 60974-3:2019 specifies safety requirements for industrial and professional arc striking and arc stabilizing devices used in arc welding and allied processes.
This document is applicable to arc striking and stabilizing devices which are stand-alone (separate from the welding equipment) or built in (housed in a single enclosure with other arc welding equipment).
This fourth edition cancels and replaces the third edition published in 2013 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- changes induced by the publication of IEC 60974-1:2017;
- reference to IEC 60974-1:2017/AMD1:2019 in Clause 2;
- Figure 2 is updated where a subtraction of the proportion of the no-load voltage is shown;
- requirement for safe operation of the arc striking and stabilising devices in the event of failure, in 11.5;
- requirements for the rating plate as in IEC 60974-1:2017, Clause 15.

IEC 60974-5:2019 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire.
This document is applicable to wire feeders and to wire-feed controls that are stand-alone (separate from the welding equipment), housed together in a single enclosure or housed in a single enclosure with other welding equipment. The wire feeder can be suitable for manually or mechanically guided torches.
This fourth edition cancels and replaces the third edition published in 2013 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- changes induced by the publication of IEC 60974-1:2017;
- addition of requirements for welding circuit connections in 6.9;
- clarification of requirements and conformity in 6.3.1;
- clarification of thermal requirements in Clause 9;
- addition of requirements in relation to abnormal operation in Clause 10.
This International Standard is to be used in conjunction with IEC 60974-1:2017.

IEC 60974-7:2019 specifies safety and construction requirements for torches used for arc welding and allied processes. This document is applicable to manual, mechanically guided, air-cooled, liquid-cooled, motorized, spool-on and fume extraction torches.
This fourth edition cancels and replaces the third edition published in 2013 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) definitions 3.11 and 3.20 were revised;
b) requirements for arc striking and stabilizing voltage rating have been added to the sequence of type tests (see 6.2);
c) the AC test voltage requirement for torches that utilize arc striking and stabilizing voltageshas been revised (see 7.5.2);
d) the test configuration of isolated circuits for torches that utilize arc striking and stabilizing voltages has been revised (see 7.5.2);
e) the metal tube used for the heating tests has additional allowable means of cooling methods (see 8.3.2 and 8.3.5);
f) for fume extraction torches, the instructions for use include additional information (see Clause 13, item i)).
This document is to be used in conjunction with IEC 60974-1:2017.

IEC 60974-2:2019 specifies safety and construction requirements for industrial and professional liquid cooling systems used in arc welding and allied processes to cool torches.
This document is applicable to liquid cooling systems which are stand-alone (separate from the welding equipment) or built-in (housed in a single enclosure with other welding equipment).
This fourth edition cancels and replaces the third edition published in 2013 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) changes induced by the publication of IEC 60974-1:2017;
b) reference in 11.1 changed.

IEC 60974-14:2018 specifies requirements for the verification of arc welding and external monitoring equipment. This document also serves for practical implementation of the verification procedure for arc welding equipment.
This document can be applied at the time of installation and any other times or intervals the user deems appropriate to ensure the equipment is capable of operating to the manufacturer’s specification or other specifications deemed applicable by the user.
The contents of the corrigendum of January 2022 have been included in this copy.

IEC 60974-9:2018 is applicable to requirements for installation and instructions for use of equipment for arc welding and allied processes designed in accordance with safety requirements of IEC 60974-1, IEC 60974-6 or equivalent. This standard cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of a new Clause 8;
- addition of interpolation details in Table 1.

IEC 62822-3:2017 applies to equipment for resistance welding and allied processes designed for occupational use by professionals and for use by laymen.
This document specifies procedures for the assessment of human exposure to magnetic fields produced by resistance welding equipment. It covers non-thermal biological effects in the frequency range from 0 Hz to 10 MHz and defines standardized test scenarios.

This part of IEC 60974 is applicable to power sources for arc welding and allied processes designed for industrial and professional use, and supplied by a voltage not exceeding 1 000 V, battery supplied or driven by mechanical means.
This document specifies safety and performance requirements of welding power sources and plasma cutting systems.
This document is not applicable to limited duty arc welding and cutting power sources which are designed mainly for use by laymen and designed in accordance with IEC 60974-6.
This document includes requirements for battery-powered welding power sources and battery packs, which are given in Annex O.
This document is not applicable to testing of power sources during periodic maintenance or after repair.
This fifth edition cancels and replaces the fourth edition published in 2012 and constitutes a technical revision.
The significant changes with respect to the previous edition are the following:
– improvement of Figure 1 (6.1.1);
– modification of Table 3 (6.1.4);
– description of energy efficiency measurements in Annex M;
– inclusion of battery supplied welding power sources in the scope. Requirements therefore are described in Annex O.

IEC 60974-4:2016 specifies test procedures for periodic inspection and, after repair, to ensure electrical safety. These test procedures are also applicable for maintenance. This standard is applicable to power sources for arc welding and allied processes designed in accordance with IEC 60974-1 or IEC 60974-6. Stand-alone ancillary equipment designed in accordance with other parts of IEC 60974 may be tested in accordance with relevant requirements of this part of IEC 60974. This third edition cancels and replaces the second edition published in 2010. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following:
- With regard to basic standards the term "leakage current" has been replaced by "touch current" and "protective conductor current".
- Measurements of circuits connected in a non-galvanic way shall be tested according to the information of the manufacturer.
- The order of the chapters dealing with measurements to be carried out has been changed.
- The example test report in Annex B has been adapted.

IEC 62822-2:2016 applies to equipment for arc welding and allied processes designed for occupational use by professionals and for use by laymen.

IEC 62822-1:2016 is a product family standard, applies to equipment for resistance welding, arc welding and allied processes designed for occupational use by professionals and for use by laymen.

IEC 60974-6:2015 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources and auxiliaries designed for use by laymen. Electrically powered equipment is intended to be connected to the single phase public low-voltage supply system. Engine driven power sources cannot exceed output power of 7,5 kVA. This third edition cancels and replaces the second edition published in 2010. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following:
- modified measurement conditions (see 7.3.1);
- improved values for temperature limits according to the class of insulation (see Table 1);
- improved maximum temperature limits (see Table 2);
- deleted overload test.
This publication is to be read in conjunction with IEC 60974-1:2012.

IEC 62135-1:2015 applies to equipment for resistance welding and allied processes and includes single and multiple welding stations which may be manually or automatically loaded and/or started. This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- creepage distances for pollution degree 4 are no longer valid (see Table 2);
- insulation requirements for Class II equipment are defined (see Table 3);
- dielectric test voltage interpolation restriction lower limit is changed to 220 V and interpolation for control and welding circuit is clarified (see Table 4);
- maximum temperature for insulation systems are reviewed in accordance with current edition of IEC 60085 (see Table 7);
- marking of terminals is defined (see 10.3);
- table for nominal voltages of supply networks is changed adopting Table B.2 of IEC 60664-1:2007 in place of the Table B.1 values referenced in the previous edition to provide for equipment to be connected to both earthed and unearthed systems. The change impacts the creepage and clearance distance requirements for some supply voltage ratings (see Annex A);
- touch current in fault condition are measurement procedures are clarified (see 6.4.4 and Annex C);
- welding circuit touch current is defined (see 6.2.6);
- touch current in normal condition are clarified and moved in protection against electric shock in normal service (see 6.3.7);
- heating test conditions are clarified (see 7.1.1);
- external surface temperature rise limitation is changed (see 7.3.2). The contents of the corrigendum of February 2016 have been included in this copy.

IEC 62135-2:2015 is applicable to equipment for resistance welding and allied processes which are connected to mains supplies with rated voltages up to 1 000 V a.c. r.m.s. This standard does not define safety requirements. This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- update of the applicable limits related to the updated reference to CISPR 11;
- exclusion of the use of narrow band relaxations for RF emission limits;
- update of the applicable limits for harmonics and flicker related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12;
- update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34;
- inclusion of symbols to indicate the RF equipment class and restrictions for use;
- inclusion of EM field immunity test for frequency from 1,4 GHz to 2,7 GHz;
- inclusion of emission limits for class B resistance welding equipment magnetic fields between 150 kHz and 30 MHz.

IEC 60974-10:2014 specifies
a) applicable standards and test methods for radio-frequency (RF) emissions;
b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker;
c) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges.
This standard is applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilizing devices. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- inclusion of optional use of a decoupling network and a load outside the test chamber;
- inclusion of an alternative test setup for portable equipment;
- inclusion of test conditions for complex controls, liquid cooling systems and arc striking and stabilizing devices;
- update of the applicable limits related to the updated reference to CISPR 11;
- exclusion of the use of narrow band relaxations for RF emission limits;
- update of the applicable limits for harmonics and flicker and inclusion of flow-charts related to the updated reference to IEC 61000-3-11 and IEC 61000-3-12;
- update of the requirements for voltage dips related to the updated reference to IEC 61000-4-11 and IEC 61000-4-34;
- update of the informative annex for installation and use;
- inclusion of symbols to indicate the RF equipment class and restrictions for use.

IEC 60974-3:2013 specifies safety requirements for industrial and professional arc striking and arc stabilizing devices used in arc welding and allied processes. This part of IEC 60974 is applicable to stand-alone units which may be connected to a separate welding power source or one where the welding power source and the arc striking and arc stabilizing device are housed in a single enclosure. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- changes induced by the publication of IEC 60974-1:2012.
This publication is to be read in conjunction with IEC 60974-1:2012.

IEC 60974-5:2013 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- changes induced by the publication of IEC 60974-1:2012;
- addition of a new symbol for hot surface (as specified in Clause 9);
- determination of the maximum load in accordance with 10.7.
This publication is to be read in conjunction with IEC 60974-1:2012.

IEC 60974-2:2013 specifies safety and construction requirements for industrial and professional liquid cooling systems used in arc welding and allied processes to cool torches. This part of IEC 60974 is applicable to stand-alone liquid cooling systems that are either connected to a separate welding power source or built into the welding power source enclosure. This part of IEC 60974 is not applicable to refrigerated cooling systems. This third edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- changes induced by the publication of IEC 60974-1:2012;
- addition of a liquid temperature fixed to 65 °C during the heating test in order to allow testing at different ambient air temperature (see 10 d));
- correction factor of cooling power at 40 °C required in instruction manual (see 12.1 o)).
This publication is to be read in conjunction with IEC 60974-1:2012.

IEC 60974-7:2013 specifies safety and construction requirements for torches for arc welding and allied processes. This part of IEC 60974 is applicable to manual, mechanically guided, air-cooled, liquid-cooled, motorized, spool-on and fume extraction torches. In this part of IEC 60974, a torch consists of the torch body, the cable-hose assembly and other components. This part of IEC 60974 is also applicable to a cable-hose assembly connected between a power source and ancillary equipment. This part of IEC 60974 is not applicable to electrode holders for manual metal arc welding or air-arc cutting/gouging. This third edition cancels and replaces the second edition published in 2007 and constitutes a technical revision. The significant changes with respect to the previous edition are listed below:
- new requirement for degree of protection of torch coupling device (see Table 1);
- scope is extended to cable-hose assembly connected between a power source and ancillary equipment (see Clause 1);
- torch parts, as recommended by the manufacturer, are included in the safe plasma cutting system design (see 7.4.2);
- new flammability requirement for handle material (see 11.3).
This publication is to be read in conjunction with IEC 60974-1:2012.

IEC 60974-1:2012 is applicable to power sources for arc welding and allied processes designed for industrial and professional use, and supplied by a voltage not exceeding 1 000 V, or driven by mechanical means. This part of IEC 60974 specifies safety and performance requirements of welding power sources and plasma cutting systems. This fourth edition cancels and replaces the third edition published in 2005 and constitutes a technical revision. The significant changes with respect to the previous edition are the following:
- the heating test shall be carried out at ambient temperature of 40 °C (see 5.1);
- new Figure 1 summarizes example of insulation requirements;
- creepage distances for pollution degree 4 are no longer valid (see Table 2);
- insulation requirements for Class II equipment are defined (see Table 3);
- dielectric test voltage interpolation restriction lower limit is changed to 220 V and interpolation for control and welding circuit is clarified (see Table 4);
- water test is clarified by suppression of visual inspection (see 6.2.1);
- isolation requirements of the supply circuit and the welding circuit are moved in protection against electric shock in normal service (see 6.2.4);
- touch current in normal service and in single fault condition requirements are changed (see 6.2.5, 6.2.6 and 6.3.6);
- maximum temperature for insulation systems are reviewed in accordance with current edition of IEC 60085 (see Table 6);
- limits of temperature rise for external surfaces are updated depending of unintentional contact period as defined in ISO 13732-1 (see Table 7);
- loading test is completed by a dielectric test (see 7.4);
- conformity test for tolerance to supply voltage fluctuation is clarified (see 10.1);
- marking of terminals is limited to external protective conductor and three-phase equipment terminals (see 10.4);
- usage of hazard reducing device is clarified (see 11.1);
- requirements for control circuits are changed (see Clause 12);
- impact test is clarified (see 14.2.2);
- environmental parameters are completed (see Annex M).

IEC 60974-12:2011 is applicable to coupling devices for cables used in arc welding and allied processes, designed for connection and disconnection without using tools. This part of IEC 60974 specifies safety and performance requirements of coupling devices. This part of IEC 60974 is not applicable to coupling devices for underwater welding. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- dimensions given in Annex A become normative,
- designation is based on the range of cross-sectional area of the welding cable intended to be connected.

IEC 60974-13:2011 is applicable to clamps for arc welding processes, designed to make an electrical connection to the workpiece without using tools. This part of IEC 60974 is not applicable to clamps for underwater welding and plasma cutting. This part of IEC 60974 specifies safety and performance requirements of welding clamps. This part of IEC 60974 does not specify requirements for welding cables.

IEC 60974-6:2010 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources, and auxiliaries designed for use by laymen. Electrically powered equipment is intended to be connected to the single phase public low-voltage supply system. Engine driven power sources can not exceed output power of 7,5 kVA. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following:
- extension of the scope;
- amendment of the title;
- touch current at fault condition (see 6.3.7);
- new definition of thermal requirements based two independent devices, one for thermal protection and one for thermal control (see 7.1);
- new definition for thermal performances at 20 °C (see 7.2);
- thermal safety requirements are based on operating temperature for normal condition and maximum temperature in overload condition (see 7.4);
- addition of abnormal operation test for thermal control device (see 10.4);
- new requirement for auxiliaries (see Clause 16);
- new rating plate definition (see Clause 17);
- introduction of new mandatory warning symbols (see 12.1.117.3, Box 17b) and 19.2);
- induced changes due to publication of IEC 60974-1:2005.
This publication is to be read in conjunction with IEC 60974-1:2005.

IEC 60974-4:2010 specifies test procedures for periodic inspection and, after repair, to ensure electrical safety. These test procedures are also applicable for maintenance. This standard is applicable to power sources for arc welding and allied processes designed in accordance with IEC 60974-1 or IEC 60974-6. Stand-alone ancillary equipment designed in accordance with other part of IEC 60974 may be tested in accordance with relevant requirement of this part of IEC 60974. This second edition cancels and replaces the first edition published in 2006. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following:
- title is amended;
- scope is extended to equipment designed in accordance with IEC 60974-6;
- complementary instructions from the manufacturer shall be followed;
- qualification of test personnel is clarified (see 4.1);
- plasma cutting power sources are excluded from no-load voltage test (see 5.6);
- voltage reducing device functional test is simplified (see 6.3);
- supply voltage is recorded in test report (see 7.1).

IEC 60974-11:2010 is applicable to electrode holders for manual metal arc welding with electrodes up to 10 mm in diameter. It is not applicable to electrode holders for underwater welding. This part of IEC 60974 specifies safety and performance requirements of electrode holders. This third edition cancels and replaces the second edition published in 2004. This edition constitutes a technical revision. The significant changes with respect to the previous edition are the following:
- change of the environmental condition in accordance with IEC 60974-1 (see Clause 4);
- change of electrical measuring instruments accuracy to Class 1 (see 5.1);
- correction of sphere diameter to 12,5 mm (see 8.1);
- alternative dielectric strength test (see 8.3).
This publication is to be read in conjunction with IEC 60974-1:2005.

IEC 60974-9:2010 is applicable to the installation and use of equipment for arc welding and allied processes designed in accordance with safety requirements of IEC 60974-1, IEC 60974-6 or equivalent. This part of IEC 60974 is applicable for the guidance of instructors, operators, welders, managers, and supervisors in the safe installation and use of equipment for arc welding and allied processes and the safe performance of welding and cutting operations. It cancels and replaces IEC/TS 62081, published in 1999. This first edition constitutes a technical revision. The following major differences with respect to IEC/TS 62081:1999 are to be noted:
- 4.3.3 Welding cables: Now dimensions are recommended;
- 5 Electromagnetic compatibility (EMC): this is completely new;
- 6 Electromagnetic fields (EMF): this is completely new;
- 7.3 Inspection and maintenance of the welding installation: There is now a differentiation between periodical and routine inspection.

IEC 60974-8:2009 specifies safety and performance requirements for gas consoles intended to be used with combustible gases or oxygen. These gas consoles are designed to supply gases for use in arc welding, plasma cutting, gouging and allied processes in non-explosive atmospheres. The significant changes with respect to the previous edition are the following:
- removal of intrinsically safe design;
- introduction of gas mixing function;
- new informative rating plate layout;
- induced changes due to publication of IEC 60974-1, edition 3.

IEC 62135:2008 applies to equipment for resistance welding and allied processes and includes single and multiple welding stations which may be manually or automatically loaded and/or started. This standard covers stationary and portable equipment and specifies safety requirements for design, manufacture and installation.

Specifies safety requirements for industrial and professional arc striking and arc stabilizing devices used in arc welding and allied processes. Is applicable to stand-alone arc striking and arc stabilizing devices that are either connected to a separate welding power source or built into the welding power source enclosure. This new edition takes into account changes induced by the publication of the third edition of IEC 60974-1 as well as technical changes in the routine test for the built-in unit.

Specifies safety and construction requirements for industrial and professional liquid cooling systems used in arc welding and allied processes to cool torches. Is applicable to stand-alone liquid cooling systems that are either connected to a separate welding power source or built into the welding power source enclosure. This new edition takes into account changes induced by the publication of the third edition of IEC 60974-1 as well as technical changes in the set-up.

Specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. The wire feeder may be a stand-alone unit which may be connected to a separate welding power source or one where the welding power source and the wire feeder are housed in a single enclosure. This new edition takes into account changes induced by the publication of the third edition of IEC 60974-1 as well as technical improvements and clarifications.

Specifies test methods to be used in conjunction with CISPR 11 to determine radiofrequency emission; relevant standards and test methods for harmonic current emission, voltage fluctuation and flicker. Also defines immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges.

Specifies applicable standards and test methods for radio-frequency emissions; applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This new edition takes into account new editions of EMC publications.

Specifies test procedures for in-service inspection and, after repair, to ensure electrical safety. These test procedures are also applicable for maintenance. Is applicable to power sources together with ancillary equipment for arc welding, cutting and allied processes built in conformity with IEC 60974-1.

Is applicable to power sources for arc welding and allied processes designed for industrial and professional use. Specifies safety and performance requirements of welding power sources and plasma cutting systems.

Specifies safety and construction requirements for torches for arc welding and allied processes.

Specifies safety and performance requirements of coupling devices. Is applicable to coupling devices for cables for welding and allied processes designed for connection and disconnection without using tools.