IEC 60794-1-308:2023

Optical fibre cables - Part 1-308: Generic specification - Basic optical cable test procedures - Cable element test methods – Ribbon residual twist test, method G8

IEC 60794-1-308: 2023 describes test procedures to evaluates the degree of permanent twist in an uncabled ribbon or in a cabled optical fibre ribbon. This document applies to optical fibre ribbons in optical cables for use with telecommunication equipment and devices employing similar techniques, and to optical fibre ribbons in cables having a combination of both optical fibres and electrical conductors. This document is not applicable to partially-bonded ribbons. The method for partially-bonded ribbons is under consideration. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. NOTE The environmental testing of optical fibre ribbon would be valuable for some applications. Useful information about suitable test methods can be found in the optical fibre standards IEC 60793-1-50, IEC 60793‑1‑51, IEC 60793‑1‑52, and IEC 60793-1-53.

Câbles à fibres optiques - Partie 1-308: Spécification générique - Procédures fondamentales d'essais des câbles optiques – Méthodes d'essai des éléments de câbles – Essai de torsion résiduelle du ruban, méthode G8

IEC 60794-1-308: 2023 décrit les procédures d'essai visant à évaluer le degré de torsion permanente dans un câble à fibres optiques en ruban relié ou non relié. Le présent document s’applique aux rubans de fibres optiques dans les câbles optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs qui utilisent des techniques similaires, ainsi qu'aux rubans de fibres optiques dans les câbles qui combinent à la fois des fibres optiques et des conducteurs électriques. Le présent document ne s’applique pas aux rubans collés partiellement. La méthode relative aux rubans collés partiellement est à l’étude. Dans tout le document, l'expression "câble optique" peut également inclure des assemblages de fibres optiques, des assemblages de fibres pour microconduits, etc. NOTE Les essais d’environnement appliqués au ruban de fibres optiques sont susceptibles d’être particulièrement utiles dans le cas de certaines applications. Des informations utiles liées aux méthodes d'essais appropriées sont fournies dans les normes relatives aux fibres optiques IEC 60793-1-50, IEC 60793‑1‑51, IEC 60793‑1‑52 et IEC 60793-1-53.

General Information

• Status: Published
• Publication Date: 09-Feb-2023
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: SC 86A - Fibres and cables
• Current Stage: PPUB - Publication issued
• Start Date: 17-Mar-2023
• Completion Date: 10-Feb-2023

Relations

• Replaces: IEC 60794-1-23:2019 - Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60794-1-308 ®
Edition 1.0 2023-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibre cables –
Part 1-308: Generic specification – Basic optical cable test procedures – Cable
element test methods – Ribbon residual twist test, method G8

Câbles à fibres optiques –
Partie 1-308: Spécification générique – Procédures fondamentales d'essais des
câbles optiques – Méthodes d'essais des éléments de câbles – Essai de torsion
résiduelle du ruban, méthode G8

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 300 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 19 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.

Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC Products & Services Portal - products.iec.ch

IEC 60794-1-308 ®
Edition 1.0 2023-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibre cables –
Part 1-308: Generic specification – Basic optical cable test procedures – Cable

element test methods – Ribbon residual twist test, method G8

Câbles à fibres optiques –
Partie 1-308: Spécification générique – Procédures fondamentales d'essais des

câbles optiques – Méthodes d'essais des éléments de câbles – Essai de torsion

résiduelle du ruban, méthode G8

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-6471-3

– 2 – IEC 60794-1-308:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General requirements . 6
5 Sample . 7
6 Apparatus . 7
7 Procedure . 7
8 Requirements . 8
9 Details to be specified . 8
Bibliography . 9

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 1-308: Generic specification – Basic optical cable test procedures –
Cable element test methods – Ribbon residual twist test, method G8

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60794-1-308 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical
committee 86: Fibre optics. It is an International Standard.
This document partially cancels and replaces IEC 60794-1-23:2019.
This edition includes the following significant technical change with respect to
IEC 60794-1-23:2019: mention in Clause 1 that this test is not applicable to partially-bonded
ribbons.
The text of this International Standard is based on the following documents:
Draft Report on voting
86A/2272/FDIS 86A/2297/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
– 4 – IEC 60794-1-308:2023 © IEC 2023
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts in the IEC 60794 series, published under the general title Optical fibre cables,
can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
INTRODUCTION
This document contains method G8 of IEC 60794-1-23:2019, which will be withdrawn. The
system for optical fibre test methods have been restructured and renumbered. The optical cable
element test methods contained in IEC 60794-1-23:2019 will now be individually numbered in
the IEC 60794-1-3xx series. Each test method is now considered to be an individual document
rather than part of a multi-test method compendium. Full cross-reference details are given in
IEC 60794-1-2.
– 6 – IEC 60794-1-308:2023 © IEC 2023
OPTICAL FIBRE CABLES –
Part 1-308: Generic specification – Basic optical cable test procedures –
Cable element test methods – Ribbon residual twist test, method G8

1 Scope
This part of IEC 60794 describes test procedures to evaluate the degree of permanent twist in
an uncabled ribbon or in a cabled optical fibre ribbon.
This document applies to optical fibre ribbons in optical cables for use with telecommunication
equipment and devices employing similar techniques, and to optical fibre ribbons in cables
having a combination of both optical fibres and electrical conductors.
This document is not applicable to partially-bonded ribbons. The method for partially-bonded
ribbons is under consideration.
Throughout the document, the wording "optical cable" can also include optical fibre units,
microduct fibre units, etc.
NOTE The environmental testing of optical fibre ribbon would be valuable for some applications. Useful information
about suitable test methods can be found in the optical fibre standards IEC 607
...