IEC 62317-12:2016
(Main)Ferrite cores - Dimensions - Part 12: Ring cores
Ferrite cores - Dimensions - Part 12: Ring cores
IEC 62317-12:2016(E) specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ring-cores, also called toroid cores, and the effective parameter values to be used in calculations involving them. The selection of core sizes for this document is based on the philosophy of including those sizes which are industrial standards, meaning that they are in broad-based use within industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included. This first edition cancels and replaces the first edition of IEC TR 61604 published in 1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC TR 61604:
a) amendment of Clause 5 concerning the relationship between standard of European, Japanese and U.S.A. sizes;
b) addition of Subclause 5.3 concerning coating.
General Information
Relations
Standards Content (Sample)
IEC 62317-12 ®
Edition 1.0 2016-09
INTERNATIONAL
STANDARD
Ferrite cores – Dimensions –
Part 12: Ring cores
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 62317-12 ®
Edition 1.0 2016-09
INTERNATIONAL
STANDARD
Ferrite cores – Dimensions –
Part 12: Ring cores
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.100.10 ISBN 978-2-8322-3642-0
– 2 – IEC 62317-12:2016 © IEC 2016
CONTENTS
FOREWORD .3
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Abbreviated terms .5
5 Primary standards .5
5.1 General .5
5.2 Dimensions of ring-cores .5
5.2.1 Designation of dimensions .5
5.2.2 Identification of standard sizes .6
5.2.3 Effective parameter values .6
5.2.4 Dimensional limits for standard sizes .6
5.3 Coating . 14
Bibliography . 15
Table 1 – Ring core dimension designations .6
Table 2 – Standard ring cores .7
Table 3 – Effective parameters of ring cores .9
Table 4 – Uncoated ring cores recommended dimensional limits . 12
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FERRITE CORES – DIMENSIONS –
Part 12: Ring cores
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62317-12 has been prepared IEC technical committee 51: Magnetic
components, ferrite and magnetic powder materials.
This first edition cancels and replaces the first edition of IEC TR 61604 published in 1997. This
edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC TR 61604:
a) amendment of Clause 5 concerning the relationship between standard of European,
Japanese and U.S.A. sizes;
b) addition of Subclause 5.3 concerning coating.
– 4 – IEC 62317-12:2016 © IEC 2016
The text of this standard is based on the following documents:
CDV Report on voting
51/1128/CDV 51/1143/RVC
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62317 series, under the general title Ferrite cores – Dimensions, can
be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
FERRITE CORES – DIMENSIONS –
Part 12: Ring cores
1 Scope
This part of IEC 62317 specifies the dimensions that are of importance for mechanical
interchangeability for a preferred range of ring-cores, also called toroid cores, and the effective
parameter values to be used in calculations involving them.
The selection of core sizes for this document is based on the philosophy of including those sizes
which are industrial standards, meaning that they are in broad-based use within industry. See
IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60205, Calculation of the effective parameters of magnetic piece parts
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Abbreviated terms
ID inside diameter
OD outside diameter
5 Primary standards
5.1 General
Compliance with the following requirements ensures mechanical interchangeability of complete
assemblies and wound coils.
5.2 Dimensions of ring-cores
5.2.1 Designation of dimensions
Table 1 describes the alphabetic character assignments for the dimensions of ferrite ring cores.
– 6 – IEC 62317-12:2016 © IEC 2016
Table 1 – Ring core dimension designations
Letter Dimension description
A Outside diameter
B Inside diameter
C Height
5.2.2 Identification of standard sizes
Table 2 shows the nominal dimensions for the range of standard ring cores. Table 2 also shows,
where applicable, the origin and regional name of each standard size, whether from historical
European sizes, historical Japanese sizes, or historical USA sizes. The previous
IEC Technical Report, 61604, detailed the different ring sizes that were tooled and commonly
used in the three distinct geographic regions. IEC TR 61604 laid the groundwork for the present
standard, which reflects the more global nature of the industry, compared with the time when
ferrite standards were evolving in different parts of the world. Manufacturers tend to have more
globally complete offerings of ring sizes than before, leading to a profusion of different sizes.
The number of different ring sizes used in total is quite large, far in excess of the 82 commonly
known standard sizes shown here, for a couple of reasons: ring cores are relatively inexpensive
to build tooling for, nor does a new ring core require an expensive new coil former to be tooled
up, meaning that custom ring cores are often commercially practical. Ferrite rings, lacking a
residual air gap, such as E-cores and other shapes have at their mating surfaces, exhibit
directly the full magnetic performance possible in the ferrite material, meaning that tooling up
precisely optimal new dimensions can give a significant advantage to a designer who is
optimizing for best possible performance.
5.2.3 Effective parameter values
The effective parameter values for the standard ring cores are given in Table 3. For global
practicality and simplicity, the effective parameters in this document are calculated from the
nominal dimensions assuming cores of rectangular cross section, and are useful for reference
and comparison of cores. For cores having a cross section with an appreciable average
rounding radius, more precise values can be calculated from the method given in IEC 60205, if
required.
5.2.4 Dimensio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.